$29 Banana Pi BPI-CanMV-K230D-Zero features Kendryte K230D RISC-V SoC for AIoT applications

The Banana Pi BPI-CanMV-K230D-Zero is a compact and low-power single-board computer built around the Kendryte K230D dual-core XuanTie C908 RISC-V chip with an integrated third-generation Knowledge Process Unit (KPU) for AI computation. It follows the form factor of the Raspberry Pi Zero or Raspberry Pi Zero 2W board and targets IoT and ML applications.

The SBC comes with 128MB of LPDDR4 RAM and uses a microSD card slot for storage. Additional features of this board include dual MIPI-CSI camera inputs for 4K video, a 40-pin GPIO header for I2C, UART, SPI, PWM, and more. Wireless features include 2.4GHz WiFi, USB 2.0 with OTG, and microphone support. These features make this SBC suitable for applications such as AI tasks such as image, video, and audio processing.

Banana Pi BPI-CanMV-K230D-Zero Specifications

SoC – Kendryte K230D
- CPU
  - CPU1 – 64-bit RISC-V processor @ 1.6GHz with RVV 1.0 support
  - CPU2 – 64-bit RISC-V processor @ 800MHz
- AI accelerator
  - Third-generation KPU with support for INT8 and INT16
  - Typical network performance: Resnet 50 ≥ 85fps @ INT8; Mobilenet_v2 ≥ 670fps @ INT8; YoloV5S ≥ 38fps @INT8;
- DPU – Built-in 3D structured light depth engine, maximum up to 1920×1080
- VPU – Video encoding/decoding for H.264/H.265 hardware encoder/decoder
System Memory – 128MB LPDDR4 @ 2666Mbps
Storage – MicroSD card slot
Display – MIPI DSI interface up to 1080p
Audio
- Onboard microphone (But nowhere to be found… wrong specifications?)
- ADC/Audio FPC connector
Camera – 2-lane MIPI-CSI connector, 4-lane MIPI-CSI connector; resolution up to 4K
Networking – Supports 2.4GHz WiFi
USB – USB 2.0 OTG Type-C port
Debugging – USB Type-C port for serial console (and power)
Expansion – 40-pin GPIO header which supports I2C/UART/I2S/SPI/PWM/ADC/JTAG
Misc – Function button; Reset button; RGB LED
Power Supply – 5V via USB-C port
Dimensions – 65 x 30 mm (Raspberry Pi Zero form factor)

Kendryte K230D block diagram — K230 block diagram

In terms of software, Banana Pi points to the CanMV GitHub repository, which contains resources for the K230 SDK, on top of that they mention that the KPU supports various neural networks including ResNet50, MobileNet_V2, and YOLOv5 which makes this device suitable for image and video processing, audio analysis, and general AI work.

Previously Banana Pi released Banana Pi BPI-M4 Zero which also has an identical form factor but is built around an Allwinner H618 SoC, the main difference between the two is that the BPI-M4 Zero is a general-purpose SBC with various multimedia and connectivity options, making it a versatile choice for DIY projects and general computing tasks. The BPI-CanMV-K230D-Zero on the other hand is optimized for AI and machine learning, with specialized hardware for neural network processing and a focus on IoT and AI-driven applications. We have also written about various SBCs and development boards from Banana Pi including Banana Pi BPI-M1S, the Banana Pi BPI-CM5 Pro, the Banana Pi BPI-WiFi6, and others.

The Banana Pi BPI-CanMV-K230D-Zero can be purchased from the Banana Pi AliExpress store for $28.90 and on Amazon for $39.90. Some additional information about the board can be found on the Wiki page.

Debashis Das

Debashis Das is a technical content writer and embedded engineer with over five years of experience in the industry. With expertise in Embedded C, PCB Design, and SEO optimization, he effectively blends difficult technical topics with clear communication