Raspberry Pi RP2040-powered 0.99″ rounded display is housed in CNC metal case

The Waveshare RP2040-LCD-0.99-B rounded display is the latest display module by Waveshare. This board is built around the Raspberry Pi RP2040 MCU and hosts a 128×115 pixels 65K color IPS LCD, along with a QMI8658C IMU, all inside a CNC metal case with an acrylic dull-polish bottom plate.

The board also hosts a USB Type-C connector, an LDO, a 2MB NOR-Flash, a SH1.0 6PIN connector (adapting 4x GPIO pins), and a BOOT button.

Waveshare RP2040 LCD 0.99 B Rounded Display

Waveshare RP2040-LCD-0.99-B rounded display module specification:

  • Microcontroller – Raspberry Pi RP2040 dual-core Arm Cortex M0+ processor up to 133 MHz with 264KB SRAM
  • Storage – 2MB on-board flash memory
  • Display – 0.99-inch 128×115 pixel 65K color IPS LCD
  • USB – 1x USB 1.1 Type-C port (host/device) for power and programming using drag-and-drop via USB mass storage
  • Sensor – QMI8658C IMU
  • Expansion – 4x GPIO via SH1.0 6PIN connector
  • Power Management – Low-power sleep and dormant modes
  • Dimension – 33 x 9.8 mm
  • Construction:
    • CNC metal case
    • Acrylic dull-polish bottom plate

As the display is built around the Raspberry Pi RP2040 MCU it supports the official Pico C/C++ and MicroPython SDKs and is also compatible with the Arduino IDE.

This is not the first rounded display module we have covered, previously we have written about displays like the MaTouch ESP32-S3T-RGB ESP32-S3, and ESP32-S3 Round SPI TFT. Feel free to check these out if you are looking for a specific rounded display product.

Waveshare RP2040 LCD 0.99 B Rounded Display Top and Bottom

The company also provides a detailed interface diagram of the hardware circuit board, showing essential components such as the QMI8658C IMU, W25Q16JVUXIQ 2MB NOR Flash, RT9013-33GB LDO, SH1.0 6-PIN GPIO connector, and a BOOT button.

Waveshare provides detailed outline dimensions of the boards. Additionally, they offer an extensive Wiki page for further information about the product.RP2040 LCD 0.99 B details size

The Waveshare RP2040-LCD-0.99-B rounded display can be purchased on Aliexpress for $11.90 plus shipping, Amazon US ($23.29), or the company’s online store for $16.99 excluding shipping.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard

3 Replies to “Raspberry Pi RP2040-powered 0.99″ rounded display is housed in CNC metal case”

  1. 33 mm? So this is real small? Looking at the pictures, I had expected something the size of a Honeywell T87 thermostat.

    And why the “3-axis accelerometer and 3-axis gyroscope”? Is it meant for mobile applications, so put it on a drone or bicycle?

Leave a Reply

Your email address will not be published. Required fields are marked *

Boardcon Rockchip and Allwinner SoM and SBC products
Boardcon Rockchip and Allwinner SoM and SBC products