TECHBASE ClusBerry Rack supports up to four Raspberry Pi CM4 based modules which can be added and removed on the fly thanks to a lockable mechanism that reminds me of hot-swappable drives found in NAS.
Using the same ClusBerry I/O mainboards as found in the earlier ClusBerry 9500-CM4 and ClusBerry-2M industrial systems, each Raspberry Pi Compute Module 4 inside the ClusBerry Rack offer one Gigabit Ethernet port, one USB host, one micro USB service port, and an RS-232/485 serial port.
TECHBASE is not the best company when it comes to describing its products, possibly because those are customizable, and in this case, they don’t show the other side of the enclosure with all ports…
But based on the PDF we’ve received, you should be able to create a system with four modules offering the following features each:
- Optional video output – HDMI
- Networking – 1x Gigabit Ethernet port (option for 2x)
- USB – USB 2.0 host (note: that’s probably USB 3.0 as VL805 PCIe to USB 3.0 chip is shown on the block diagram), and a micro USB service port
- Serial – 6-pin RS-232/485 serial port
- Security – Optional TPM 2.0
- Misc – User LEDs and button
- 5V power input or optional 30W PoE
The full system, i.e. not at the module level, can be extended with M.2 NVMe SSD support and two standard mini PCIe socket support for wireless modules that include 4G LTE and 5G modem, NB-IoT, LoRa, ZigBee, Z-Wave, Sigfox, Wireless M-Bus, secondary Wi-Fi/Bluetooth interface or Wi-Fi Hi-Power, and other custom wireless interfaces.
TECHBASE recommends software cluster management with Docker and K3s Lightweight Kubernetes. Each module can be configured for specific tasks such as a standard I/O gateway, a wireless modem, a router, an AI gateway with Google Coral Edge TPU module, etc…
The company said “delivery time for various configurations of
ClusBerry Rack casing including ExCard modules and modems can be approximately 2 months, depending on the CM4 supply on the market and chosen expansion cards”, and they also announced the availability of the basic version of ClusBerry-2M within two to four weeks. There’s no specific product page about the new Cluster Rack, but eventually, more details may surface on TECHBASE website.
As a side note, I’ve heard from several sources that the Raspberry Pi CM4 is in short supply, and so hopefully (mostly) electrically compatible modules like SOQuartz or Radxa ROCK3 CM will be able to fill the void. Before you ask, I do not have details about ROCK3 CM yet, just the name…
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
@CNXsoft
Here are details of Rock3 / CM3
https://wiki.radxa.com/Rock3/CM3
Hope it helps
Thanks. That will teach me using the wrong search engine (Google), Duckduckgo and Bing return proper results…
I came across this a time ago. https://www.jeffgeerling.com/blog/2021/uptime-labs-cm4-blade-adds-nvme-tpm-20-raspberry-pi
It looks very promising.
Just how much heat, will 16 toasters marketed as RPI CM4 , generate in a 1U case ?
Not enough to be too much, 1kW 1U systems are quite common in server space, you just need enough fans for them.
Better ignore this constant stupid RPi bashing. A CM4 with upper ‘server load’ will consume 5-6W so in case of the Uptime Labs Blade thingy the choice of the NVMe SSDs might even be more important than the ~100W max. generated by CPU utilisation. It then depends on the SSD in question, I/O access patterns and ASPM/APST driver support and parametrisation (PCIe Active State Power Management and NVMe Autonomous Power State Transition).