Adaprox Fingerbot Smart Home Automation
Fingerbot is the place where IoT meets analog and creates a solution for smart home automation that works with Alexa, Google Home, Siri, and many smart home apps.
What is Fingerbot?
Adaprox, a team of engineers, programmers, and designers, designed the finger-sized device that can handle on/off for devices, repetitive motion tasks, toggles or switches.
Fingerbot Does What?
The little robot can work through voice or app, and can handle all activation and deactivation of traditional appliances, lighting and can even use its soft “finger” on a touchscreen for repetitive tasks in the home, all done mechanically.
How Does It Work
Fingerbot is designed to be attached to the device it is controlling with double-sided tape or velcro. This creates a firm grip on the surface so that its finger can control the device properly. The velcro option allows for switching Fingerbot between appliances, and also makes sure there isn’t any loss of grip over time.
Expand To Control All Fingerbots
The Adaprox Bridge allows for voice control, IoT of all devices and IFTT, which allows Fingerbot the opportunity to control devices based on how devices are interacting rather than just by user control. Routines for control of devices can be set to almost any type of interaction.
Two Major Features of the Bridge
The Adaprox Bridge also increases the range of the BT 5.0 allows for more control of more Fingerbot devices. The company states that all Fingerbots can be controlled through the Adaprox Bridge.
Battery Life and Charging Method
The company has also stated that the battery in the Fingerbots only needs to be recharged biannually. There is a Type C USB port on the Fingerbot that allows for a full charge, usually within an hour.
Cost Comparison
The cost reduction, between a smart device or appliance and a Fingerbot, controlled traditional appliance or device is significant, as reported by the company.
Pricing
The Fingerbot costs $25.00, for the base robot, with specials and discounts for the early bird backer. Arm Tool Kit is $10.00 and the Adaprox Bridge is approximately $44.00. There are a number of packages available and discounts also seem to be plentiful.
Shipping
The robot is due for shipping in May 2020 and is well beyond its original funding target on Kickstarter.com.
Adaprox SDK
The Adaprox SDK is found on GitHub once the source material is published for use by anyone. At the announcement of the Kickstarter campaign, the SDK was due soon. An option designed for the makers who are usually looking for inexpensive ways to automate their homes through IoT.
Further Information
The Kickstarter Campaign has more information. Including timeline and featured listings.
Stephen started writing about technology after publishing sci-fi short stories. His first White-Paper, written in 2008, was well received and inspired him to continue writing about technology. Today he writes in the technology space full time, covering a multitude of topics. During the time he wrote part-time he edited hundreds of titles for large publishers, in science and technology. He lives in Staten Island, with his wife and children.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
This is one of those devices that I just don’t get.
it’s simple: think of it as an digital-to-analog converter
We are not target audience for remote fingering device, that’s why.
That sounds like Homer’s bird :
https://youtu.be/R_rF4kcqLkI?t=2m56s
Seems more similar to microbot push than switchbot bot, having a short vertical throw. But switchbot has a bigger ecosystem and just added the curtain motor.
Where can I buy it? I think it’s designed for the home device which doesn’t support Google Home or Alexa. They can control via Fingerbot remotely!
I think this is neat, but one thing I noticed (seems obvious in hind-sight) with the video showing it hitting a typical light switch (upper-right of this image http://tinyurl.com/yhbq2dlj) – you would need a second fingerbot to push the switch back to its original position. Kinda kills it for me for that.
That would kill it – for sure – what about double-sided tape or an arm extension – there are some design options for the arms (at a cost – I am fairly certain). Thanks for pointing that flaw out to us here.
I also laughed when I saw that, but later in the video, they show an arm with a suction cup that allows for ON/OFF on this type of switch.
The problem whit that solution is that suction cups only work whit a limited amount of force, time ago I buy some suction cup things for the kitchen, they fall all the time. The other problem is the glue; in the video they show is a double side glue patch, and I clearly remember that small bathroom spray deodorant they use to sell(I even remember the TVad show an Asian kid) THE THING ALWAYS FALL OFF, this hapen even whit the 3M branded glue patch, an is because the constant mecanical movement.
I pass on this one, change the switch is goin to be cheaper in the near future
Wait this is a joke right?