FriendlyELEC is better known for their low-cost tiny single board computers, but the company has also introduced systems-on-module in the past such as Smart6818 module powered by Samsung S5P6818 octa-core processor.
The company has now launched another system-on-module with SOM-RK3399, which as its name implied features Rockchip RK3399 processor, as well as a corresponding carrier board mostly designed for artificial intelligence and computer vision applications.
SOM-RK3399 System-on-Module
Specifications:
- SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Cortex-A72 cores up to 2.0GHz, 4x Cortex-A53 cores up to 1.5GHz, Mali-T864 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and VPU capable of handling 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
- System Memory – Dual-Channel 2GB DDR3
- Storage – 16GB eMMC 5.1 flash
- Networking
- 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module (AP6356S), dual antenna interface
- Realtek RTL8211E Gigabit Ethernet transceiver
- USB – 2x USB-C ports on the module
- 260-pin edge connector with
- Storage – 1x SDIO/MMC for SD card
- Networking – Gigabit Ethernet
- Video Input – 1x or 2x 4-Lane MIPI-CSI dual ISP, up to 13MPix/s, supports simultaneous input of dual camera data
- Video output
- HDMI 2.0a up to 4K @ 60Hz, HDCP 1.4/2.2
- DisplayPort 1.2 Alt Mode on USB Type-C port
- LCD interfaces – 1x 4-lane eDP 1.3 connector up to 10.8Gbps. 1x or 2x 4-Lane MIPI-DSI
- USB – 2x USB 2.0 interfaces, 1x USB 3.0 host interface,
- PCIe x4, compatible with PCIe 2.1, Dual operation mode;
- Other I/Os – 14x GPIO (6x 1.8V/8x 3.3V), 1x I2S, 2x I2C (1.8V/3.3V), 2x PWM, 1x UART / SPI, ADC, 1x IR-RX, 1x SPDIF_TX, 3x 1.8V ADC inputs
- Debugging -Debug UART, 3V level, 1500000bps
- Misc – Power, Reset, and Recovery buttons, power LED, 1x user LED
- Power Supply
- 5V input via USB type-C port
- RK808-D PMIC with independent DC/DC, enabling DVFS, software power-down, RTC wake-up, system sleep mode
- Dimensions – 69.6 x 50 mm; 8-layer PCB
- Temperature Range – -20°C to 70°C
In theory, the module can work in standalone, as you can just use the USB-C port on the left for power, and the USB-C port on the right to connect to a display, Ethernet and/or USB input devices via an adapter. But obviously that only really works for applications where you don’t need access to the many I/O’s offered by the module. One potential application might be digital signage where you need just a power supply, and a display while getting the media files over WiFi.
SOM-RK3399 support Android 7 & 7, FriendlyCore OS based on Ubuntu Core 16.04 or 18.04, as well as Armbian and Lubuntu since it can leverage the software work done for FriendlyELEC RK3399 SBC’s. The company also provides Rockchip’s Android NN SDK with Android 8.1 to leverage GPU acceleration for AI workloads. You’ll find download links and documentation in the Wiki.
SOM-RK3399 Dev Kit Carrier Board
Most people will likely want to get started with SOM-RK3399 development kit to easily access all of the interfaces exposed by the module.
Key features and specifications of the carrier board:
- Supported SoM – SOM-RK3399 with 2GB DDR3 and 16GB eMMC flash as described above
- Storage – 1x microSD card slot, M.2 NVMe SSD support (see PCIe expansion slot below)
- Video Output
- 1x HDMI 2.0a port up to 4K @ 60Hz with HDCP 1.4/2.2
- DisplayPort 1.2 Alt Mode on USB Type-C (on module)
- 1x 4-lane eDP 1.3 connector
- 2x 4-Lane MIPI-DSI connectors including one multiplexed with MIPI CSI
- Video In/Camera interface
- 1x HDMI input up to 1080p30, 720p60 supporting both video and audio recording
- Up to 2x 4-Lane MIPI-CSI connectors up to 13MPix/s
- Audio – 1x 3.5mm stereo headphone jack, 1x 3.5mm microphone Jack, 1x PH2.0 connector for microphone
- Connectivity
- Gigabit Ethernet (RJ45)
- 802.11b/g/n/ac Wi-Fi 5 and Bluetooth 4.1 (via SoM)
- 1x MiniPCIe Socket and microSIM slot for optional 4G LTE module
- USB
- 1x USB Type-C Port
- 4x USB3.0 Type-A ports
- 3x USB2.0 PH2.0 4-pin connectors
- Expansion
- 1x PCIe x4 M.2 Key-M Socket
- Various headers with 3x ADC, 1x IR-IN, 2x I2C, 2x UART, 1x 8ch-I2S, 3x GPIO, 1x SPDIF-TX
- Misc – 3x UserKey, 1x power LED, 1x dual color user LED, CR2032 battery slot for RTC, 12V cooling fan interface
- Power Supply – 12V DC
- Dimensions – 185 x 123 mm; 4-layer PCB
The Wiki for the carrier board contains more details information about the pin layout and other technical parameters.
SOM-RK3399 module is sold for $75 with two free antennas. Accessories useful for the carrier board are also available as an option, including 7″ and 11.6″ eDP touchscreen displays, MIPI camera modules, and so on, but for some reasons, the company did not add the actual carrier board in their shop. Hopefully, they just forgot to list it on their website and will fix this tomorrow. [Update: The complete SOM-RK3399 development kit is now available with the carrier board, SOM-RK3399 module, the heatsink fan pictured below, two antennas, a USB-C cable, a 12V/2A power adapter, and a USB to UART debug board for $120 plus shipping]
Thanks to theguyuk for the tip.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
(I’m an American) — “FriendlyELEC is better known for their low-cost SBCs…” Not as low-cost as they used to be due to tariffs. Thanks Trump.
How about from andahammer.com ?
What the tariffs on such boards? 10% or 25%. Will there be additional fees?
Here if I receive packages from DHL or FedEx that are hit by customs duties, I get an additional “handling fee” from them.
I wasn’t serious, I was joking. The tariff on electronic boards from China is 25%. My recent package from FE does not show this duty or tariff. But then I see it was shipped from Hong Kong. Maybe that’s how they escape the tariff?
The price of FE boards has gone up over the last couple of years, but it’s not from the tariffs, and least not as far as I can tell. Yet.
Tell them to write ‘sample’ on the invoice and mail it with ePacket or surepost — something that will end up in the Post Office. DHL and FedEx will collect the tariffs, so far I have not had a single package via the Post Office ask for it.
That’s mostly my experience here (in Thailand) too, except maybe for once or twice where I had to pay customs duties at the post office.
I remember now… when I placed my order I thought it was odd that shipping via DHL was cheaper than by China Post. Normally DHL costs more. Of course I chose DHL, it’s much faster — got my package in only 8 days. So what I deduce is the China Post packages are shipped from China and include the tariff, while the DHL packages are shipped from Hong Kong and have no tariff.
Andahammer.com
ARMWorks LLC
5775 Soundview Drive, Ste 104B
Gig Harbor, WA 98335
Is in USA and sells friendlyarm, so what’s the price difference straight form them?
Their prices are higher than direct from FE. Which is fine, ARMWorks needs to make a profit. If I needed something in a hurry I’d order from them.
ARMWorks had to pay the tariff, that’s why they are higher. They ordered a large quantity which customs collected on for sure.
The tariff is collected by US customs when the package crosses the US border. Tariffs can be quite annoying. I once had to drive to the airport to pay $3.75 to release a package from Africa. Customs only took cash. And if I didn’t come within four hours they were going to put it into a bonded warehouse and charge me $100/day storage. I almost abandoned the package, it was only worth about $100.
IIRC, the rules for individuals are a bit different. For US, up to $800 duty free, over that a fixed tariff, which isn’t always collected. For importers, tariffs have always varied (and even with the “blanket 25% tariff on China”, it’s possible to ask for and receive an exclusion for a specific product class); due to powerful special interest groups, some items have had high tariffs for a long time (in the US, import tariffs on sugar are a notorious example).
I’d be so happy with an $800 duty-free allowance. Here it’s only about $30 (1,000 THB).
Is this the same edge connector of the RockChip based “PX6” SoM used for automotive purposes (radio, nagivation ,etc)? Also comparing the specs, PX6 and this RK339 seems very simiar.
Is 4GB (RAM) option planned?
I received the board yesterday and begin the first test. First problem, the Marvell PCIE board hit the camera connector, so I had to desolder it… The marvell controler work perfect out of the box, video output on Type-c too. The beautiful dissipator design is finaly not efficient because they use a pad to transfer heat and it’s not efficient for handle a Make -j6 for long, heat stay on chip. I have to make a copper pad because of the over components around…
Now on sale SOM-RK3399V2 $70 4GB. Friendlyelec.
@CNX I think the dev kit you link to in the post above is now $99 .
FriendlyELEC has released a new version with 4GB LPDDR4 and integrated heatsink: SOM-RK3399V2
https://www.cnx-software.com/2020/03/12/friendlyelec-som-rk3399v2-cpu-module-gets-4gb-lpddr4-ram-upgrade/