Posted on

Rockchip RK29xx Processors at CES 2011

Rockchip (瑞芯微电子), a Fuzhou (China) based company, showcased its new RK29XX processors at CES 2011. The processors are aimed at smartphones, mid, tablet and internet tv (smart tv) and compete directly with the like of Qualcomm snapdragon or Samsung Hummingbird. Here are the specs for the RK29XX series: 1.2 GHz ARM Cortex A8 core with Neon and 512KB L2 cache High performance 2D and 3D processors supporting OpenGL ES 2.0 and Open VG. The GPU can deliver up to 60 MT/s. 1080p video decoding for H.264, VP8, RV, WMV, AVS, H.263, MPE-4…. 1080p H.264 video encoding Supports DDRIII, DDRII, Mobile DDR memory 24-bit HW ECC for MLC Nand, support e-MMC boot 3 USB ports for device, host, 3G module 2 SD  ports for SD card and WiFi Sensor interface for front and rear camera, up to 5M Standard TFT/EPD controller for variable panels 8 channel I2S and SPDIF TS port […]

Posted on

Motorola Atrix 4G: A mobile turns into a Laptop

Motorola showcased the Atrix 4g smartphone based on NVidia Tegra 2 and running Android 2.2 (upgradable to Android 2.3 gingerbread later in 2011). It can be plugged directly into an ultra-thin laptop chassis (Laptop Dock for Motorola Atrix 4G). Motorola calls that a WebTop. The dock itself has a resolution of 1366×768 but the phone can support up to 1280×1024 in Desktop Mode. Contrary to Lenovo LePad, where the dock has an Intel iCore processor, all processor is done by the smartphone. Once in the dock you’ll be able to use the keyboard and mouse to check your emails (Gmail), play videos (720p supported, but 480p is recommended for smoothness), send SMS, browse the web with Mozilla Firefox (Add-ons are also supported) and more. The smartphone has a Citrix receiver so it can run Windows XP/Vista/7 thru the Citrix server (Virtual Machine). It also is capable of docking directly into […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on

P2P for embedded systems: BitTorrent and Emule – Part 2

In part1, I explained how to build and install aMule for mips platorm, in part2, we’ll build and install Transmission BitTorrent client for devices based on Sigma Designs SMP8634/SMP8635. Transmission BT is already used in quite a few NAS and media players including Syabas Networked Media Tank, Western Digital WD MyBook, ReadyNAS, D-Link DNS-323 & CH3SNAS… as you can see at the bottom of the transmission download page. Building Transmission 2.13 daemon and client First download Transmission 2.13 source code and required dependencies: OpenSSL 1.0.0c, cURL 7.21.3 and libevent 1.4.14b (do not use libevent 2.0.x). You’ll also need zlib 1.2.5 that we compiled in part1. Extract them: tar xjvf ../Downloads/transmission-2.13.tar.bz2 tar xzvf ../Downloads/openssl-1.0.0c.tar.gz tar xjvf ../Downloads/curl-7.21.3.tar.bz2 tar xzvf ../Downloads/libevent-2.0.9-rc.tar.gz Build OpenSSL 1.0.0c: ./Configure no-asm –prefix=/home/jaufranc/edev/libs linux-generic32 make CC=”mipsel-linux-gcc” AR=”mipsel-linux-ar r” RANLIB=”mipsel-linux-ranlib” make install Build cURL 7.2.13: ./configure –prefix=/home/jaufranc/edev/libs –build=mipsel-linux –target=mipsel-linux -host=i686 –disable-ipv6 –without-random –with-ssl=/home/jaufranc/edev/libs –with-zlib=/home/jaufranc/edev/libs CC=mipsel-linux-gcc LDFLAGS=-ldl make make install […]

Posted on

P2P for embedded systems: BitTorrent and Emule – Part 1

Whether your device is a Network Access Storage (NAS) or a media player with network capabilities, you may consider adding P2P to allow downloads of files as you would do on your computer. Two of the most used P2P protocols are BitTorrent and eMule, but most of the client have a UI designed for Linux or Windows and may not be easily ported to an embedded system. So what we need to look for here are command line based clients or daemons that can be compiled and run in an embedded platform. After some research, here are the 2 programs we’ll use: aMule 2.2.6 a multiplatform eMule-like client Transmission 2.13 running as a daemon for BT dowloads Today, I’ll show how to use aMule 2.2.6 in Sigma Designs SMP863X target, for example in Popcorn Hour A-100. But a similar method (just a different compiler mips-linux-gnu-gcc and setting Little endian (-EL)) […]

Posted on

Near Field Communication (NFC) Introduction and Software Development

Android 2.3 features near field communication (NFC) in order to allow payment through your phone as it is already implemented in Japan with FeliCa (Felicity Card), a contactless RFID smart card system from Sony, direct communication between NFC devices, RFID reader, etc… NFC is already supported in Samsung / Google Nexus S. In this blog post, we’ll see what near field communication is, which hardware is needed and what needs to be done at the software level (driver and NFC stack). What is Near Field Communication ? Extract from Wikipedia: Near Field Communication or NFC, is a short-range high frequency wireless communication technology which enables the exchange of data between devices over about a 10 centimeter (around 4 inches) distance. The technology is a simple extension of the ISO/IEC 14443 proximity-card standard (proximity card, RFID) that combines the interface of a smartcard and a reader into a single device. An NFC […]

Posted on

HTTP Server for uCLinux

You may need a web server on your no-MMU embedded system in order to allow remote configuration or possibly provide external access to some files. Usually, you’ll need a lightweight webserver (e.g. not Apache) with the required features and in case of no-mmu system, source that can accommodates uClinux limitations such as no fork support. You’ll also take into account the programming language or the server: e.g. C/C++. Java, Ruby, Perl… If your system does not support Java or Perl for example, that may not be the best solution to add one of those only for the web server and it also depends on the resources (Flash/RAM) available. There are plenty of C/C++ lightweight http servers such as thttpd or lighttpd, however those are using fork in their code. One open source http server that is lightweight and uses vfork (instead of fork) is mathopd. At the time of writing, […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on

Embedded Systems Hardware & Software Trends for 2011

VDC Research – a US company specialized in technology market intelligence – recently released two reports about embedded systems trends for 2011. The first report focuses on hardware and the second on software. The first report entitled “Top 10 trends for the embedded hardware and systems market in 2011” listed the following trends: COMs gain traction as time-to-market accelerators for OEMs By combining COM express modules with off-the-shelf COMs, suppliers are able to offer several different configurations of CPU boards and leverage COMs’ interchangeable characteristics. CPU vendors can thus offer a fairly wide range of boards without incurring high design and inventory carrying costs. PC/104 module family under pressure Although VDC data projects the PC/104 family will experience a single-digit rebound from the low points of the recent recession, vendors will have to commit resources to develop newer strategies in order for this technology to remain viable. Otherwise, the recovery […]

Posted on

Building Archos Gen8 Source on Ubuntu 10.10

[ad#Google Adsense-Leaderboard] In a follow-up post of GPL Source code and SDE for Archos Gen8 Devices earlier today, here are the steps I followed to build the toolchain, kernel and root file system with buildroot on Ubuntu 10.10 Desktop version: Extract the source code: tar xzvf ../Downloads/gen8-gpl-froyo.tgz Install extra packages for the build: sudo apt-get install flex bison build-essential zip curl libmpfr-dev libmpfr1ldbl automake autoconf libtool gettext texinfo Run the build to generate the toolchain, kernel and root file system: cd gen8-gpl-froyo/buildroot sudo make Then wait for a while (It took 1h15 on my machine) to get the binary images: zImage (kernel) in buildroot/linux/arch/arm/boot rootfs.arm.squashfs (rootFS) in buildroot/binaries/uclibc

Boardcon EM3562 Rockchip RK3562 SBC with 8 analog camera inputs