Posted on

NXP Introduces QorIQ LS1046A Quad Cortex A72 Communication Processor with 10 GbE, SATA 3.0, PCIe 3.0, etc…

NXP has unveiled a new QorIQ communication processor with LS1046A based on quad ARM Cortex-A72 cores, and including 10GbE, PCIe Gen.3, SATA 3.0, and USB 3.0 interfaces. The processors targets CPE and vCPE (virtual Customer Premise Equipment), routers, NAS, and service provider gateways for the home and small office, as well as single board computers. QorIQ LS1046A key specifications: CPU – Four ARM Cortex -A72 cores with 2MB L2 cache; 32,000 CoreMarks. Memory  – 32-/64-bit DDR4 memory controller Storage – SATA 3.0 controller, quad SPI Connectivity 2x 10 Gigabit Ethernet controllers 1x 2.5 Gigabit Ethernet controller 4x Gigabit Ethernet controllers Other peripherals 3x PCIe 3.0 Controllers, x4, x2, x 1 3x USB 3.0 with integrated PHY 4x UART, 4x I2C, SPI, GPIO JTAG Support for hardware-based virtualization via ARM SMMU Packet processing acceleration –  Packet classification and distribution; hardware work scheduling, shaping, and buffer management. Integrated security engine – High-speed […]

Posted on

Rockchip RK3229 based MXQ 4K System Info and Antutu Benchmark

Since MXQ-4K TV box is not working well enough, even after a firmware update, I’ve decided not to do a full review. But since this is the first Rockchip RK3229 device I’ve received, I’ll still share some system information (CPU-Z) and Antutu benchmark results. Rorkchip RK3229 is detected as a quad core Cortex A7 processor between 408 MHz and 1.46 GHz with a Mali-400MP GPU. CPU-Z does not know about it, so it only detect RK3066, meaning the manufacturing process (40 nm) is wrongly reported, and RK3229 is manufactured using a 28nm process. The model us MXQ-4K (rk322x) with the board simply called rk30sdk. They’ve also set the framebuffer resolution to 1280×720 probably due to the limited performance of Mali-400MP GPU. Internal storage is shown to be 3.81GB large, but that’s because I modified the firmware, and it’s now 1.44GB with the latest firmware. Rockchip RK3229 does not support Android […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on

Avnet Introduces Zynq Based MicroZed Industry 4.0 / IIoT Ethernet Kit

There’s a lot of buzz around IoT, and the industrial sector is also trying to build smarter factories using protocols or standards part of Industry 4.0 or Industrial IoT (IIoT) depending on the country or group you belong too. Avnet has just launched MicroZed Industry 4.0 Ethernet Kit (I4EK) based on Xilinx Zynq-7000 ARM & FPGA SoC to address this market with support for the most common industrial protocols such as EtherCAT, Powerlink, PROFINET RT/IRT, EtherNet/IP, and Modbus-TCP. The “brain” of the development board is MicroZed module powered by Zilinx Zynq-7020 dual core Cortex A9 processor with FPGA fabric, and coupled with 1GB RAM, 128 MB SQPI flash, a Gigabit Ethernet port, and various I/Os. The module is connected to MicroZed FMC Carrier board with the following features: 2x 100-pin board-to-board MicroHeaders Xilinx PC4 header for download/debug – Accesses PL JTAG 5x Digilent Pmod compatible interfaces 39 user I/O 1x […]

Posted on

Cleo35 Touchscreen Display for Arduino UNO Comes with Tutorials and Example Projects (Crowdfunding)

There are already various options to add a (touscheen) display to Arduino board with software support including TFTLibrary for Arduino,  and recently I tried Nextion serial touchscreen displays that are supported by a WYSIWYG editor, but the latter is only supported in Windows and not exactly user-friendly, and I found the few provided tutorials would only work with a specific resolution incompatible with the displays I had been sent. So I gave up on the idea of interfacing the display with Arduino or ESP8266 as it would be too time-consuming. FTDI CleO project might be faster and easier to get started, as their CleO35 touchscreen display for Arduino UNO will come with a 20 chapter tutorial covering over 80 topics, and 20 projects to get started. Some of the key features and specs of Cleo35 display include: MCU – FTDI FT903 32-bit FT32 core @ 100MHz with 256kB on-chip Flash […]

Posted on

Linux 4.5 Released – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.5 on Sunday: So this is later on a Sunday than my usual schedule, because I just couldn’t make up my mind whether I should do another rc8 or not, and kept just waffling about it. In the end, I obviously decided not to,but it could have gone either way. We did have one nasty regression that got fixed yesterday, and the networking pull early in the week was larger than I would have wished for. But the block  layer should be all good now, and David went through all his networking commits an extra time just to make me feel comfy about it, so in the end I didn’t see any point to making the release cycle any longer than usual. And on the whole, everything here is pretty small. The diffstat looks a bit larger for an xfs fix, because that fix has […]

Posted on

$100 Chuwi Ilife V5S Autonomous Robotic Vacuum Cleaner Offers an Alternative to iRobot Roomba

iRobot Roomba autonomous vacuum cleaners have been around since 2002, with the robots automatically cleaning the floor, detecting walls and edges, going around table and chair feet, etc… The company also produced iCreate 2 programmable robot for educators, students and developers who wants to learn about robotics, and works with Arduino and Raspberry Pi boards. I had seen similar cleaners from Chinese vendors in the past, with prices starting at $30, but they looked basically useless based on the specs, but yesterday I discovered Chuwi Ilife V5S robotic vacuum cleaner and mop that seems pretty decent, and even can go back to its charging station automatically. Chuwi Ilife V5S key features and specifications: Anti-collision System, drop avoidance induction 50db low noise design; 850pa strong suction Sensors – 10 IR sensor on sides and bottom, OBS (Optical backscatter point sensor) sensors, 1 set wall sensor. (Note: OBS is based on IR, […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on

Using a Cheap USB Microscope To Read IC Part Numbers

It’s not always easy to read the part number on IC you find on boards, and some time ago, I watched a video where Lady Ada used a USB microscope to demonstrate how to solder some components, and probably using that 5.0 MP model sold on Adafruit for about $80. But I found a similar looking USB microscope with a 2.0MP sensor and 1000X magnification on Ebay for $16.59 shipped, so I bought it, received it today, and I’ve given it a try. Such microscopes can be used to inspect skin and hair, PCB, textile, bank notes, jewelery, and so on. There are apparently other models based on the one I purchased with useful features like auto-focus, wireless support, different levels of magnification, and different colors. Supported operating systems include Windows and Linux, Android, and Windows 8 according to the package. The microscope comes with a stand, a CDROM with […]

Posted on

BeagleBone Enhanced Adds Gigabit Ethernet, More Memory & USB Ports, and Sensors (Crowdfunding)

It’s nice to see BeagleBone Black‘s open source hardware  being leveraged by third parties, as we’ve already seen designs such as BeagleBone Green and BeagleBone Black Industrial 4G in the past, and now UK based SanCloud has decided to launch BeagleBone Enhanced on Indiegogo (flexible funding). BeagleBone Enhanced board specifications with bold highlights showing improvements over the BeagleBone Black Rev. C: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 1GB DDR3 RAM @ 800 MHz Storage – 4GB eMMC flash + micro SD slot, optional 1MB SPI NOR flash USB – 2x USB 2.0 host port (A type), mini USB OTG port, 2x USB interfaces via expansion header Serial Port – UART0 via 3.3V TTL header Ethernet – Gigabit Ethernet Video Output – micro HDMI with EDID support, up to 1280×1024 resolution. Audio Output – Via HDMI Sensors Optional 6 […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications