Posted on

Raspberry Pi Compute Module 3 (CM3) and Compute Module 3 Lite (CM3L) Datasheet Released

Last week NEC announced they were going to use Raspberry Pi Compute 3 Module in some of their presentation and digital signage displays. This led to a longish discussion in the blog post, during which one commenter left a link to Raspberry Pi Compute Module 3 datasheet, so let’s have a look. There will actually be two version of the Broadcom BCM2837 based Compute Module with CM3 with a 4GB eMMC, and CM3 Lite (CM3L) without eMMC, but SD card signal are available to the baseboard. Apart from storage differences, both modules shared the same specifications: SoC – Broadcom BCM2837 quad core Cortex A53 processor @ 1.2 GHz with Videocore IV GPU System Memory – 1GB LPDDR2 Storage CM3 Lite – SD card signals through SO-DIMM connector CM3 – 4GB eMMC flash 200-pin edge connector with: 48x GPIO 2x I2C, 2x SPI, 2x UART 2x SD/SDIO, 1x NAND interface (SMI) […]

Posted on

iFive and Techvision Rockchip RK3399 Hybrid Tablet/Laptop to Run Android 6.0 or Remix OS 3.0

We’ve seen Samsung is about to release the first Rockchip RK3399 Chromebook to the market. However it will be selling for $499, possibly a bit more than many people are ready to pay for such device, so Rockchip RK3399 powered iFive and Techvision 2-in-1 hybrid laptop & tablet devices showcased at the Hong Kong Electronics Fair might be worth a look as they should be quite cheaper. The solution from Techvision ODM design house is a proper 2-in-1 hybrid laptop with a 11.6″ detachable screen with 1920×1080 resolution, two USB ports, a USB Type-C port and HDMI 2.0 output. The laptop also includes 2GB RAM, and 16GB flash. iFive model is more like a 9.7″ tablet sold with a keyboard acting as a tablet stand, and connecting with the tablet through pogopins. Beside the 4K display, the tablet also features 4 speakers, an audio jack, a USB 3.0 type C […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
NXP-i.MX7-BLock-Diagram
Posted on

HMP, Real-Time Linux and Xenomai – A Look at Three Options to Develop Real-Time Linux Systems on Application Processors

This is a guest post about Heterogeneous Multicore Processing (HMP), Real-Time Linux, and Xenomai to develop real-time Linux systems written by Guilherme Fernandes, Raul Muñoz, Leonardo Veiga, Brandon Shibley, all working for Toradex. Introduction Application processor usage continues to broaden. System-on-Chips, usually powered by ARM Cortex-A cores, are taking over several spaces where small ARM Cortex-M, and other microcontroller devices, have traditionally dominated. This trend is driven by several facts, such as: The strong requirements for connectivity, often related to IoT and not only from a hardware point of view but also related to software, protocols, and security The need for highly interactive interfaces such as multi-touch, high-resolution screens, and elaborate graphical user interfaces; The decreasing price of SoCs, a consequence of its volume gain and new production capabilities. Typical cases exemplifying the statement above are the customers we see every day starting a product redesign upgrading from a microcontroller […]

Posted on

Raspberry Pi Compute Module 3 to be launched by the end of the year, used in NEC displays

Eben Upton had already mentioned the Raspberry Pi Foundation was working on a Raspberry Pi Compute Module 3 based on the same Broadcom BCM2837 quad core Cortex A53 processor and 1GB LPDDR2 RAM used in Raspberry Pi 3 board earlier this year, but few details had been provided at the time. The module is still not available, but NEC Display Solutions Europe has already announced they are working on integrating Compute Module 3 into commercial displays starting with 40″, 48″ and 55″ models in January 2017, and up to 98″ by the end of next year, used for digital signage and presentation platforms. The Raspberry Pi Foundation goes on to say they’ve been working on NEC project for over a year now, and they expect to release Compute Module 3 to the general public by the end of the year. Price and complete technical details have not been released yet. […]

Posted on

Zidoo X9S Android Media Center Review – Part 2: Android Firmware & OpenWrt (NAS Functions)

Zidoo X9S is more than a simple Android TV box, as it supports NAS function via OpenWrt running simultaneously with Android 6.0 and its USB 3.0 and SATA ports, as well as HDMI input function capable of recording and broadcasting videos, and supporting Picture-in-picture, so I find “Android Media Center” better fit the description for this device. I’ve already taken pictures of the Zidoo X9S and its board in the first part of the review, so I’ll test both Android 6.0 & OpenWrt firmware, and the most of the features in the second part of the review. Initial Setup and First Boot I connected the usual accessories and cables to the box including a USB 3.0 hard drive, HDMI and Ethernet cables, USB RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, and a USB keyboard to take screenshots. I also added a 1TB SATA […]

Posted on

CHIP Pro is a $16 WiFi and Bluetooth 4.2 System-on-Module Powered by a $6 GR8 ARM Cortex A8 SIP

Next Thing CHIP board and corresponding PocketCHIP portable Linux computer have been relatively popular due to their inexpensive price for the feature set, as for $9, you’d get an Allwinner R8 ARM Cortex A8 processor, 512MB flash, 4GB NAND flash, WiFi & Bluetooth connectivity, and plenty of I/Os, which made it very attractive for IoT applications compared to other cheap boards such as Raspberry Pi Zero and Orange Pi One. The first board was mostly designed for hobbyists, but  company has now designed a new lower profile system-on-module called CHIP Pro based on Next Thing GR8 SIP combining Allwinner R8 SoC with 256MB DDR3 RAM that can be used for easy integration into your own hardware project. While the original CHIP board exposed full USB ports and interface for video signal, the new CHIP Pro is specifically designed for IoT with the following specs: SIP – Allwinner R8 ARM Cortex […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on

Exilong RF & WiFi Irrigation System Automatically Takes Care of Your Garden Watering (Crowdfunding)

I find it fun to spend time watering the flowers and grass in my garden, but if you’d rather do it automatically then Tevatronic Exilong might be for you as the irrigation system controls up to 4 valves, triggers watering based on RF water sensing sensors via a gateway connected to the cloud through your wireless router. The kit gateway takes care of RF communication with sensors, WiFi connectivity to the cloud server, and turn on and off up to four 24V DC water valve part of your existing installation. It can be configured by iOS or Android mobile app, or your web browser. The other part of the kit are the water pressure sensors that you need to insert into the soil of your garden in order to monitor trees, bushes, and/or flowers. The sensors are using RF (433/915 MHz) communication, send data back to the gateway every minute, […]

Posted on

Samsung Starts Mass-Production of Exynos 7 Dual (7270) Processor used in Galaxy Gear S3 Smartwatch

Samsung has just issued a press release announcing the Korean company had just started mass-production of the first SoC for Wearables using 14-nm FinFET process with their Exynos 7 Dual (7270) dual Cortex A53 processor. Exynos 7270 is also said to be the first such SoC to embed full connectivity and LTE modem integration. Exynos 7270 specifications: CPU – Dual-core ARM Cortex–A53 processor  @ up to 1.0 GHz GPU – ARM Mali-T720 Memory – LPDDR3 support Storage – eMMC 5.0, SD card interfaces Display – Up to 960×540 (qHD) resolution Camera – Up to 5MP pixel sensor support Multimedia – HD (720p@30fps) video with HEVC, H.264, VP8 Codec LTE Modem – LTE Category 4 non-CA Connectivity – WiFi, Bluetooth 4.2, FM Radio GNSS – GPS, GLONASS, BeiDou PMIC – Integrated in SiP-ePoP package Package – SiP-ePoP, 10x10mm (SiP: System-in-Package; ePoP: embedded Package-on-Package) The SoC will be packaged inside a SiP-ePOP […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications