CNX Software - Embedded Systems News

February 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

RJCLIP Repairs Ethernet RJ45 Clips in Seconds

Ethernet cables are normally made of RJ45 (8P8C) connectors that come with a clip that helps keeping the cables in place. However, over the years, I’ve broken a few of those, and the solution is normally to cut the cable, and replacing the broken RJ45 connector with a new one using a crimping tool and a cable tester (or multimeter). This does the job put normally takes a few minutes of your time, or more if you’ve messed up the connection the first time. I’ve just come accross an alternative solution with RJCLIP. It’s just a small plastic bit that simply fits on top of the broken RJ45 connector, and acts like if something ever happens. It just take a few seconds to put it on. Youtube user Vince tried it out, and it does seem to work pretty well, but also has some caveats with some type of connectors, […]

February 17, 2017February 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

EU funded AXIOM Board is Powered by Xilinx Zynq UltraScale+ FPGA + ARM SoC

Back in 2015, Xilinx unveiled Zynq Ultrascale+ MPSoC combining ARM Cortex A53 & Cortex R5 cores, a Mali-400MP2 GPU, and UltraScale FPGA, and the company recently launched ZCU102 Evaluation Kit based on the SoC, which sells for just under $3,000. But if you are based in the European Union, you’ll be glad to learn about 4 millions Euros of your taxes have been spent to design a board based on the same MPSoC family as part of the AXIOM project, which was developed in collaboration with European universities and companies with the “aim of researching new software/hardware architectures for Cyber-Physical Systems (CPS) to meet the expectations” in terms of computational power, energy efficiency, scalability through modularity, easy programmability, and leverage of the best existing standards at minimal costs. AXIOM (Agile, eXtensible, fast I/O Module) board’s key specifications: SoC – Xilinx Zynq Ultrascale+ ZU9EG MPSoC with four ARM Cortex A53 cores […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

February 17, 2017February 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

9Tripod X3399 SoM and Development Board are Powered by Rockchip RK3399 Hexa Core Processor

9Tripod (九鼎创展) has just launched X3399 system-on-module powered by Rockchip RK3399 hexa-core Cortex A72/A53 processor, and as well as a corresponding development board for people wanted to get started quickly before designing their own baseboard. X3399 core board preliminary specifications: SoC – Rockchip RK3399 hexa-core big.LITTLE processor with two ARM Cortex A72 cores up to 2.0 GHz, four Cortex A53 cores, and a ARM Mali-T860 MP4 GPU with OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11 support System Memory – 2GB LPDDR3 (2x Samsung K4E8E304EE-EGCF) Storage – 8GB eMMC 5.0 flash (Samsung KLM8G1GEND-B031) IOs – 204-pin to be soldered on baseboard PMIC – Rockchip RK808-D Dimensions – 55×55 mm 9Tripod does have a forum in English, but the company provides most of the information in Chinese. I could not find details about Linux or Android images and source code, except a few mentions of Linux Qt, Ubuntu, and […]

February 16, 2017June 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$140 R-TV BOX K99 Android 6.0 mini PC Comes with Rockchip RK3399 SoC, 4GB RAM, 32GB Storage

We will the first hardware platforms shipping with a Rockchip RK3399 hexa-core processor later this month and in March, with Firefly-RK3399 development board, and various TV boxes / mini PCs such as Vorke Z3, Yundoo Y8, and Remix IO+. Another option is “R-TV BOX K99” with 4GB RAM, 32GB storage, Gigabit Ethernet, 802.1ac WiFi… that’s currently up for pre-order on GeekBuying for $139.99, and scheduled to ship in 3 days. R-TV BOX K99 specifications: SoC – Rockchip RK3399 hexa core processor with 2x ARM Cortex A72 cores @ up to 2.0 GHz, 4x ARM Cortex A53 cores, Mali-T860MP4 GPU @ 800 MHz with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, AFBC (frame buffer compression) System Memory – 4GB DDR3 Storage – 32 GB eMMC 5.1 flash + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60 Hz Video Codecs – 4K 10-bit H.265, H.264 & […]

February 16, 2017February 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

$175 Bben MN17A Celeron N3450 Apollo Lake Mini PC Comes with an mSATA SSD Slot

The first Apollo Lake mini PC available from China was Voyo V1 VMac Mini with a Celeron N3450 or Pentium N4200 processor, but there’s now a new model with Bben MN17A with Celeron N3450, 4GB RAM, and 32GB eMMC flash, and the ability to add your own storage via an SSD bay. Bben MN17A mini PC specifications: SoC – Intel Celeron N3450 quad core processor @ 1.1 GHz / 2.2 GHz and 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz; 6W TDP System Memory – 4GB DDR3L (up to 8GB) Storage – 32GB eMMC flash (Options for 16, 64 or 128 GB) + mSATA SSD bay + micro SD slot up to 128 GB Video Output – HDMI 1.4b port up to 4K @ 30 Hz Audio – HDMI + 3.5mm audio jack Connectivity – Fast Ethernet, dual band 802.11 b/g/n/ac WiFi, and Bluetooth 4.2 (Intel […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

February 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYD-C437x-PRU Development Board Leverages TI Sitara AM437x Programmable Real-time Unit

MYIR Technologies launched MYC-C437x system-on-module based on TI Sitara AM437X processor, and the corresponding MYD-C437x development board at the end of 2015, but the latter did not make use of the processor’s PRU-ICSS (Programmable Real-Time Unit Subsystem and Industrial Communication SubSystem) block. The company has now released a new version of the baseboard called MYC-C437x-PRU which exposes I/Os pins to leverage the PRU-ICSS and enable implementation of protocols like EtherCAT and Profibus.MYD-C437x-PRU industrial development board specifications: System-on-Module – MYC-C437x module with SoC – Texas Instruments AM437x ARM Cortex A9 processor @ up to 1GHz with PowerVR SGX530 GPU (AM4378/AM4379 only) System Memory – 256 or 512MB (default) DDR3 SDRAM Storage – 4GB eMMC Flash (reserved 256/512MB Nand Flash design), 16MB QSPI Flash (unpopulated by default), 32KB EEPROM Connectivity – Gigabit Ethernet PHY Storage – 1x micro SD slot Serial ports – 1x 3-wire RS232 debug serial port, 2x 5-wire RS232 serial […]

February 15, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Janz Tec emPC-A/RPI3 is an Industrial Embedded Controller Based on Raspberry Pi 3 Board

We see more and more industrial devices making use of Raspberry Pi boards, after Kunbus RevolutionPi RevPi Core industrial computer based on Raspberry Pi Computer Module, and RailPi 2.0 embedded computer equipped with a Raspberry Pi 3 (or ODROID-C2) board, Janz Tec is now offering another option with emPC-A/RPI3 industrial embedded controller featuring Raspberry Pi 3 board, and supporting variable DC power input, 24V digital inputs and outputs, and interfaces such as CAN, RS485… Janztec emPC-A/RPI3 specifications: SoC – Broadcom BCM2837 quad core ARM Cortex-A53 processor @ 1.2 GHz (but limited to 4x 600 MHz on purpose to avoid overheating) and VideoCore IV GPU System Memory – 1GB DDR2 RAM Storage – externally accessible micro SD slot Video Output – HDMI 1.4 port Connectivity – 10/100M Ethernet port, 802.11 b/g/n WiFi and Bluetooth LE (BCM43143) USB – 4x USB 2.0 ports Debugging – 1x 9-pin D-SUB connector for serial debug […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications