Hardware Category - Page 935 of 1114 - CNX Software

December 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

CX-S806 Android Media Player with 4K UHD, H.265 Codec Support Goes for $63 and Up

CX-S806 is one of the first Android TV boxes powered by Amlogic S812, providing both 4K UHD video output, and H.265 codec support. It started selling for about $80 with 2GB RAM at the end of October, but now you can get the 1GB RAM version for $62.90, and the 2GB version for $73.10, both prices including shipping from an Aliexpress seller with excellent feedback, albeit from only 22 sales. As a reminder, I’ll list the full specs again: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with octa-core Mali-450MP6 GPU up to 600+ MHz System Memory – 1 to 2 GB DDR3 Storage – 8GB flash. No SD card slot Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 (AP6330 wireless module) Video Output – HDMI 1.4b up to 2160p @ 30 Hz (Summary says HDMI 2.0, specs 1.4b), 3.5mm AV jack (composite + […]

December 4, 2014May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

e-con Systems Unveils eSOMiMX6 SoM based on μQ7 Form Factor, and Ankaa Development Kit

QSeven is one of the many standards for system-on-modules, and it defines both Qseven (Q7) 70x70mm modules, and smaller μQSeven (μQ7) 70x40mm modules. While there are quite a few SoMs following the larger form factor, few modules are based on micro Q7, and e-con Systems eSOMiMX6 has just launched one of these tiny modules with eSOMiMX6 system-on-module powered by Freescale i.MX6 processors, as well the corresponding Ankaa development kit comprised of the SoM and a baseboard. eSOMiMX6 module specifications: SoC – Freescale i.MX6 single, dual or quad Cortex A9 processor @ 800MHz to 1.2 GHz with Vivante GPUs System Memory – 256MB/512MB (Solo only), 1GB (default), or 2GB (dual/quad only) LVDDR3 RAM Storage – 4GB (default) to 64GB eMMC flash, 2MB SPI NOR flash, and SD/MMC + SATA II interfaces via MXM connector Display / Video Output: HDMI up to 1920 x 1080 Dual channel 24-bit LVDS 24-bit LCD RGB MIPI […]

December 4, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

SGET Releases embedded NUC Standard Version 1.0 for Embedded Boards

SGET (Standardization Group for Embedded Technologies) had previously released system-on-module standards such as Qseven and SMARC. The group has now published the new “embedded NUC” (eNUC) standard around NUC (Next Unit of Computing) developed by Intel, that defines mechanical and basic technical parameters for multifunctional, small sized and cost effective embedded computer boards. The standard specifies both required and optional features. Minimal requirements are summarized as follows: PCB outline & PCB mounting concept – 10.16 x 10.16 cm (4 x 4 “) board. Other dimensions as shown above. PCB and connectors height are also defined, respectively with 18.6 mm and 24.25 mm maximum heights. Predefined Board Types with minimum interface and feature set: Type 1 (Basic) – At least 1x LAN, 2x USB. and an external single power connector. Recommended features include video out (HDMI, DP,…), 1x SATA, 1xSD slot, audio interfaces, mini PCIe, etc… Type 2 (Connectivity) – At […]

December 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Applied Micro XC-1 Server Development Board (Mustang) is Now Available to Developers for $895

64-bit ARM server boards such as Applied Micro XC-1 Mustang and AMD Opteron A1100 development kit have been available since the beginning of the year, but only to selected companies, and at a price of several thousand dollars per board. Applied Micro is now offering their X-Gene based XC-1 development board to individual developers for $895, or about ~40% discount to the $1495 company now have to pay for the board. It may also be available from distributors (part number: EV-883208-X1-PRB-1). XC-1 board (codenamed Mustang) technical specifications: SoC – Applied Micro X-GeneAPM883208-X1 8-core ARM 64-bit @ 1.6 GHz System Memory – 2x DDR3 UDIMM memory slots up fitted with 2x 4GB sticks (8 GB), upgradable to 16GB Storage – 1x 128Mbit SPI NOR Flash for booting, 1x SATA 3 ports, SD card slot, 1024Kb and 256Kb I2C EEPROM Connectivity – 2x Gigagit port (SGMII), 10 GbE SFP+ cage, 1x Gigabit […]

December 3, 2014December 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Olimex Introduces Open Source Hardware ESP8266 Wi-Fi Modules, Evaluation Board Coming Soon

ESP8266 has become popular as module based on this SoC make it incredibly cheap to add Wi-Fi to all sort of things, the SDK available, and a community has gathered around the solution. Olimex has jumped on the bandwagon, and is now provided two open source hardware ESP8266 modules: MOD-WIFI-ESP8266 which makes it easy to interface to other Olimex boards thanks to its UEXT connector, and MOD-WIFI-ESP8266-DEV with two rows of 0.1″ connectors and an unsoldered UEXT pad, is better suited if you want to integrate it with your own baseboard, or experiment with a breadboard. An evaluation board called MOD-WIFI-ESP8266-EVB will be launched a little later. Both modules share most specifications: SoC – Espressif Systems ESP8266 32-bit RISC processor with 802.11 b/g/n support(32-pin QFN package), Wi-Fi – 802.112 b/g/n with WEP, TKIP, AES, and WAPI engines, Wi-Fi direct (P2P), and soft-AP. On-board antenna and u.FL connector Expansion MOD-WIFI-ESP8266 – […]

December 3, 2014December 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Yotaphone 2 Smartphone Features an Improved AMOLED + ePaper Dual Display

About two years ago, Yota , a technology company based on Russia, introduced the Yotaphone, an Android smartphone with an innovative dual display solution comprised of a standard color display on the front, and an E-ink display on the back, in order to extend battery life. The idea was interesting, but the phone did not look that great. But with Yotaphone 2, the company upgraded the processor with a Snapdragon 800 processor, a larger 5″ display, and if the back ePaper display looks as crisp and clear in real life as in the picture below, you could have a winner, and copycats will eventually show up. Yotaphone 2 specifications: SoC – Qualcomm Snapdragon 800 quad-core Krait processor @ 2.2 GHz with Adreno System Memory – 2GB RAM Storage – 32GB eMMC Displays Front – 5″ AMOLED touch screen, 1920×1080 resolution,16M colors, 442ppi, with Corning Gorilla glass 3. Rear – 4.7” […]

December 3, 2014December 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Unboxing of Ugoos UM3 Android and Ubuntu ARM mini PC

Ugoos UM3 is another minic PC powered by Rockchip RK3288 SoC with 8GB storage, 2GB RAM. It has Wi-Fi, but no Ethernet, so it looks like the offspring between a full-sized TV box and an HDMI stick. The company sent me a sample for evaluation pre-loaded with a dual boot image with Android 4.4 & Ubuntu 14.10. I’ll start by unboxing, and opening the device, before testing the dual boot image another day. Ugoos UM3 Unboxing The company sent me the device via DHL in a package for RK3066 / RK3188 devices, but I guess end-users will get an update package that will probably look similar. I was surprised how tiny the device was when I first took it out of the box, and with a black body and red cover, it’s probably the cutest too. It comes with a 5V/2A power supply and corresponding USB to micro USB cable, […]

December 2, 2014December 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Review of Open Hour Chameleon Android Media Player

Open Hour Chameleon is yet another Rockchip RK3288 based Android TV box, but it comes with aluminum enclosure, and boots from SD card instead of internal storage like all other devices I’ve seen on the market so far. Cloud Media (previously Syabas) also have a long history of making Linux based media players based on Sigma Designs processor, and when I worked on IPTV products, we used their PopCorn Hour has comparison platforms. So we should probably expect some interesting customization and features from the company. I’ve already posted pictures of Chameleon box and its board, so today, I’ll focus on reporting my experience with Android 4.4, and later I may also try their Lubuntu image. First Boot, Settings and First Impressions Normally I quickly try the remote control, and get it out of the way. But this time, I’ve spent a little bit more time with the remote since […]