Hardware Category - Page 899 of 1115 - CNX Software

April 25, 2015April 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$10 Digistump Oak ESP8266EX Board is Arduino Compatible, Connects to the Cloud, and More (Crowdfunding)

A few years ago, I wondered why adding Wi-Fi to Arduino had to be rather expensive ($40+), and why there weren’t any low cost and small form factor Wi-Fi boards for embedded applications. But we’re now in 2015, embedded is “dead” giving rise to IoT, and I’m left wondering how it’s possible to make IoT Wi-Fi modules that cheap, and whether people will ever stop churning out cheap Wi-Fi boards, as I’m flooded with such news weekly… So when I saw yet another ESP8266 board on Kickstarter I was about to dismiss it, but since it was made by Digistump, that has an active community with their other products like DigiSpark Pro or DigiX, I decided to have a closer look. Digistump Oak hardware specifications: MCU – Espressif ESP8266EX 32-bit microprocessor @ 80MHz (overclockable up to 160MHz) with 1MB ROM (~300KB available for user code), 64KB RAM, 512 bytes EEPROM […]

April 24, 2015April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Tronsmart Draco H3 is a Low Cost HDMI TV Stick based on Allwinner H3 SoC

Allwinner H3 was unveiled as a quad core processor for 4K media players that would sell for less than $50, but so far devices like TVPP0030 are selling for an unattractive $80, but this may be about to change thanks to devices like Tronsmart Draco H3 HDMI TV stick that are expected to sell between $30 to $40 retail, possibly excluding shipping, and it would then compete against Amlogic S805 platforms such as MK808B Plus that only support 1080p video decoding and output. Preliminary specifications for Tronsmart Draco H3: SoC – Allwinner H3 quad core ARM Cortex A7 @ 1.5GHz with quad core Mali-400MP2 @ 600 MHz System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash + micro SD slot Connectivity – 802.11 b/g/n Wi-Fi with external antenna, and Bluetooth 4.0 (AP6212 module) Video & Audio Output – HDMI 1.4 male connector up to 4K2K @ 30Hz, with […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

Wintel W8 Dual boot Android 4.4 + Windows 8.1 mini PC Unboxing

Last year, we were promised dual boot mini PC based on Intel that would run Windows 8.1 or Android 4.4, but finally companies decided against shipping a dual boot firmware, and simply loaded Windows 8.1 on their machines. Kingnovel sent me their K8 mini PC, better known as Wintel W8, based on Intel Atom Z3735F, and that can dual boot Windows 8.1 with Bing or Android 4.4. Today, I’ll go through the specs first, take some pictures of the device, and tear it down to have a closer look at the hardware, and in a separate post I’ll quickly check out Windows 8.1, before spending a bit more time on Android 4.4 to see how well or bad Android runs on Intel platforms. Kingnovel K8 / Wintel W8 specifications Hardware-wise the box has mostly the same boring specifications as almost any other Intel Atom Z3735F products on the market: SoC […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

WiPy Wi-Fi Board for IoT Runs MicroPython on Texas Instruments CC3200 (Crowdfunding)

If you’ve interested in connecting devices via Wi-Fi, you’re being spoiled as “Internet of things” boards keeps getting designed and produced. The latest board with WiPy, a small board powered by Texas Instruments CC3200, running MicroPython, and consuming less than 1mA in suspended mode with Wi-Fi connected. WiPy specifications: MCU – TI CC3200 ARM Cortex-M4 @ 80 MHz with 256KB RAM, Wi-Fi and TCP/IP stack Storage – 2MB flash Connectivity – WiFi 802.11b/g/n 16Mbps (AP, Station and WiFi-Direct), on-board antenna and u.FL connector Expansion – 2x 14-pin headers (2.54mm pitch) with Up to 25 GPIOs 2x UART, SPI, I2C, I2S, and SD card 3×12 bit ADCs Others 4×16 bit timers with PWM and input capture RTC Hash and encryption engines: SHA, MD5, DES, AES Reset switch, heartbeat LED Power Supply – 3.6 – 5.5V DC input; 3.3V output up to 250mA Power Consumption – Active: 14 mA; Suspended (Wi-Fi connected): […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Razor Forge TV SnapDragon 805 Android Game Console is up for Pre-order for $100

Razor Forge TV was first unveiled at CES 2015, and on paper at least looks like a great Android TV console for $100 with a Qualcomm Snapdragon 805 processor, 2GB RAM, and 16GB flash. The gaming console can now be pre-ordered in the US for $99.99, although most people might want to get the bundle with the wireless controller for $149.99. Razor Forge TV specifications: SoC – Qualcomm Snapdragon 805 quad core Krait 450 CPU @ 2.5GHz per with Adreno 420 GPU System Memory – 2GB RAM Storage – 16GB Video Ouput – HDMI 1.4 output Connectivity – Gigabit Ethernet, Wireless 802.11ac 2×2, Bluetooth 4.1 + HS USB – 1x USB 3.0 port Power – N/A Dimensions – 105mm x 105mm x 17mm The device will run Android TV 5.0 Lollipop, support up to four controllers, and be Google Cast Ready, meaning it can also be used like a ChromeCast. […]

April 23, 2015April 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

e-con Systems 13MP MIPI CSI-2 Camera Designed for Nvidia Jetson TK1 Board

e-con Systems has just introduced e-CAM130_CUTK1, a 13 MP MIPI CSI-2 camera board specifically designed for Nvidia Jetson TK1 development board powered by Nvidia Tegra K1 quad core Cortex A15 processor supporting up to Ultra HD (3840×2160) resolution @ 22 fps, or 1080p @ 30+ fps with MJPEG or YUV422 output. e-CAM130_CUTK1 camera board is comprised of a camera module and an adapter board that can be directly plug into Jetson TK1 board. Camera board key features and specifications: Camera Module e-CAM130_CUMI1820_MOD with S-mount lens holder based on Aptina AR1820HS sensor. Max S/N ratio: – 36.3 dB; Dynamic Range: – 65.8 dB Interface – 4-lane MIPI CSI-2 interface Resolution / Frame rate – VGA @ 90 fps, 720p @ 60 fps, 1080p @ 30 fps, UltraHD (3840×2160) @ 22 fps, 13MP (4224×3156) @ 14 fps. Values are the same for MJPEG or YUV422. Connector – 125-pin connector for Jetson TK1 […]

April 23, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

TBS 2980 Matrix 2 AllWinner A80 Android TV Box Will Support USB Tuners

TBS launched their Matrix 2910 media player based on Freescale i.MX6 Quad processor in 2013, and what made the platform especially interesting was support for the company’s USB DVB tuners in their Android and Ubuntu images. The company has now unveiled its successor with TBS 2980 Matrix 2 powered by Allwinner A80 octa core processor that will also support USB DVB-T2, DVB-C & DVB-S2 tuners. TBS Matrix 2 specifications: SoC – AllWinner A80 4x Cortex 15, 4x Cortex A7 big.LITTLE processor with PowerVR GC6230 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC + micro SD card slot Video Output – HDMI + AV port Audio – HDMI, AV, and optical S/PDIF Connectivity – Gigabit Ethernet, dual band Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0 USB – 1x USB 3.0 port, 2x USB 2.0 host ports Misc – IR receiver, reset button Power Supply – 5V/3A Dimensions – 101 x 101 […]

April 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nextion 2.4″ and 4.3″ UART TFT Displays Come with a Drag and Drop UI Editor (Crowdfunding)

You may want or need to add a small TFT display to control your devices, and it may not always be easy to interface with the hardware, and desiging the user interface may be time consuming. ITEAD Studio latest project, Nextion TFT HMI touchscreen displays, aims to simplify connection with a simple UART interface, and make UI design easier with their Nextion Editor that allows developers to create a user interface without coding. Two models are available: Nextion-2.4″ 2.4″ display with 320×240 resolution Refresh rate: 80 ms 4MB flash 4-pin UART interface Micro-SD card slot, GPU, resistive touch sensor. Dimensions – Board: 74.43 x 42.85 x 3.32 mm; display: 60.78 x 42.62 mm Power Consumption – Sleep: 20 mA; active: 90 mA Nextion-4.3″ 4.3″ display with 480×272 resolution Refresh rate: 20 ms 16MB flash 6-pin UART interface Micro SD card slot, GPU, RGB driver, RGB buffer, resistive touch sensor Dimensions […]