Posted on by Tomisin Olujinmi - 1 Comment on SB Components’ Trekko Pico is an open-source, RP2040-powered GPS logger with multi-GNSS support

SB Components’ Trekko Pico is an open-source, RP2040-powered GPS logger with multi-GNSS support

trekko pico gps logger front

After the success of their Kickstarter campaign, SB Components has now made the Trekko Pico GPS logger available for pre-order. The Trekko Pico is a small location logger for travelers and outdoor enthusiasts that makes it easy to track routes and record their travels. A Raspberry Pi RP2040 powers the Trekko Pico, providing the programming, connectivity, and data logging functionality. The Quectel GNSS L76K module supports the concurrent reception of GPS, GLONASS (or BeiDou), Galileo, SBAS, and QZSS signals, with 32 tracking and 72 acquisition channels. There is a JST 2-pin connector that can be used to attach an external battery, and the Microchip MCP73831 controller is responsible for battery charging and management. Also, users can slot a coin cell into the holder at the back of the board to power a real-time clock for data backup purposes. Potential applications for the Trekko Pico GPS logger include surveillance, telematics, Geographic […]

Posted on by Debashis Das - 1 Comment on Trenz Electronic TE0950-03-EGBE21A – An AMD Versal AI Edge VE2302 SoC FPGA evaluation board

Trenz Electronic TE0950-03-EGBE21A – An AMD Versal AI Edge VE2302 SoC FPGA evaluation board

AMD Versal AI Edge Evalboard with VE2302 SoC

Trenz Electronic recently announced the TE0950-03-EGBE21A an evaluation board with AMD Versal AI Edge XCVE2302-1LSESFVA784 SoC FPGA. This board features 8 GB of DDR4 SDRAM and 128 MB of SPI Flash (as the primary boot option), a microSD card slot, a 32 GB eMMC flash (secondary boot), and an EEPROM with a MAC address. Additionally, the board supports a range of VE-series devices, such as VE2002, VE2102, VE2202, VE2302, and VM1102, enhancing its application versatility. The AMD Versal is a family of adaptive compute acceleration platforms (ACAPs) designed by AMD. Following its acquisition of Xilinx, it integrates CPU, GPU, and FPGA technologies along with dedicated software support to create a highly flexible development environment. Trenz Electronic VE2302 Evaluation Board Specifications: SoC – AMD Versal AI Edge XCVE2302-1LSESFVA784, A784 package, compatible with multiple VE-series devices RAM – 8 GB DDR4 SDRAM Storage 128 MB SPI Flash (primary boot option) MicroSD card […]

Khadas Edge2 Arm mini PC
Posted on by Kumpee Teeravech - 10 Comments on Review of Purple Pi OH – A Rockchip RK3566 SBC tested in 2GB/16GB and 4GB/32GB configurations

Review of Purple Pi OH – A Rockchip RK3566 SBC tested in 2GB/16GB and 4GB/32GB configurations

Review of Purple Pi OH and Purple Pi OH Pro

Hello, I am going to review the Purple Pi OH boards from Wireless-Tag. The Purple Pi OH is a single-board computer (SBC) mechanically compatible with the Raspberry Pi. They are designed for personal mobile Internet devices and AIoT devices, which can be used in various applications, such as tablets, speakers with screens, and lightweight AI applications. The manufacturer sent me two models. The first model is the Purple Pi OH, which is equipped with 2GB of memory and 16GB of storage space and supports 2.4GHz Wi-Fi. The second model is the Purple Pi OH Pro, equipped with 4GB of memory and 32GB of storage space. This board supports both 2.4GHz and 5GHz Wi-Fi. The other components of both devices are almost the same. They are powered by the Rockchip RK3566 chip, which integrates a quad-core Cortex-A55 processor up to 1.8 GHz, a Mali-G52 GPU from Arm for 3D graphics acceleration, […]

Posted on by Paisit Wongsongsarn - 4 Comments on SONOFF POW Ring Review – A WiFi CT Clamp power meter tested with eWelink and Home Assistant

SONOFF POW Ring Review – A WiFi CT Clamp power meter tested with eWelink and Home Assistant

SONOFF POW Ring review

The trend of measuring the energy usage of household electrical devices has become increasingly popular among Smart Home users in the past few years. We have received the new SONOFF POW Ring Smart Power Meter Switch device for review from ITEAD. Unlike SONOFF’s existing energy monitoring devices such as POW Elite, SPM, DualR3, POW3, and POW Origin, this new device, also called POWCT, utilizes a current transformer (CT) to measure the current flow, or total power being consumed. This method provides no physical contact with live wires and reduces the risk during installation. Additionally, it can measure currents of up to 100A, which is significantly higher than previous models. This makes it suitable for measuring electricity usage at the main circuit breaker, energy generated from solar panels, or even for Electric Vehicle (EV) home chargers. The SONOFF POW Ring, which we are testing today, is not only a Smart Power […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Make a Raspberry Pi 5 Game Boy lookalike with the PiBoy DMGx handheld gaming console kit

Make a Raspberry Pi 5 Game Boy lookalike with the PiBoy DMGx handheld gaming console kit

PiBoy DMGx

Experimental Pi’s PiBoy DMGxis is a kit that converts the Raspberry Pi 5 into a handheld gaming console that looks like a Game Boy with a 3.5-inch color display and all the controls found on the original Game Boy. The company has launched several PiBoy portable game console kits for Raspberry Pi SBCs over the years, so the new PiBoy DMGx for the Raspberry Pi 5 should come as no surprise, and the company says it should be able to run emulators for N64, PSP, Dreamcast, Wii, Gamecube, PS2, and others.   PiBoy DMGx kit specifications: Supported SBCs – Raspberry Pi 5; with adapters: Raspberry Pi 3 and 4 Storage – MicroSD card slot (11) Display – 3.5-inch display with 640 x 480 resolution (3) Video Output – Micro HDMI port from RPi 5 Audio – Speaker (5), 3.5mm audio jack (7) User inputs – D-Pad (10), analog stick (9), […]

Posted on by Debashis Das - 2 Comments on Nuvoton’s NuMicro M091 Arm Cortex-M0 microcontroller targets industrial sensors

Nuvoton’s NuMicro M091 Arm Cortex-M0 microcontroller targets industrial sensors

nuvoton NuMicro M091 Smart Industrial Sensors Series

Nuvoton recently launched the NuMicro M091 Series of microcontrollers, these are 32-bit MCUs based on the Arm Cortex-M0 core, featuring 4 sets of operational amplifiers with 8 MHz gain bandwidth (GBW), 4 sets of 12-bit DAC, up to 16 channels of 2 MSPS 12-bit SAR ADC, a temperature sensor, and extensive I/O options. The MCU supports the NuMaker evaluation board and various third-party IDEs making this an ideal device for industrial sensing, smart sensors, and precision instrumentation applications. Previously we have seen Nuvoton release MA35H0 and MA35D1 both MPUs are based on Cortex-A35 cores, feel free to check those out if you are interested in the topic. Nuvoton NuMicro M091 MCU specifications: Processor ARM Cortex-M0 core Maximum clock speed: 72 MHz Memory Flash – Up to 64 KB SRAM – 8 KB LDROM – 2 KB (for user program loader) SPROM – 512 Bytes (for security protection) Analog Features 4x […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Edge Impulse machine learning platform adds support for NVIDIA TAO Toolkit and Omniverse

Edge Impulse machine learning platform adds support for NVIDIA TAO Toolkit and Omniverse

Edge Impulse NVIDIA TAO Models

Edge Impulse machine learning platform for edge devices has released a new suite of tools developed on NVIDIA TAO Toolkit and Omniverse that brings new AI models to entry-level hardware based on Arm Cortex-A processors, Arm Cortex-M microcontrollers, or Arm Ethos-U NPUs. By combining Edge Impulse and NVIDIA TAO Toolkit, engineers can create computer vision models that can be deployed to edge-optimized hardware such as NXP I.MX RT1170, Alif E3, STMicro STM32H747AI, and Renesas CK-RA8D1. The Edge Impulse platform allows users to provide their own custom data with GPU-trained NVIDIA TAO models such as YOLO and RetinaNet, and optimize them for deployment on edge devices with or without AI accelerators. NVIDIA and Edge Impulse claim this new solution enables the deployment of large-scale NVIDIA models to Arm-based devices, and right now the following object detection and image classification tasks are available: RetinaNet, YOLOv3, YOLOv4, SSD, and image classification. You can […]

Posted on by Tomisin Olujinmi - 12 Comments on TinyVision is a compact Allwinner V851S/V851S3-powered Linux board for vision-based applications

TinyVision is a compact Allwinner V851S/V851S3-powered Linux board for vision-based applications

tinyvision board

Unrelated to tinyVision.ai, the TinyVision development board is a computer vision board from Chinese developer YuzukiTsuru powered by either the Allwinner V851S or the V851S3 and is billed as an “ultimate all-in-one solution for Linux motherboards, IPCs, servers, routers, and more.” It packs features such as a Cortex-A7 core running at 1200MHz, a 2-channel MIPI CSI input, and an independent image signal processor (ISP) capable of a maximum resolution of 2560 x 1440 in a compact form factor. TinyVision specifications: Processor – Allwinner V851SE / V851s3 with Cortex-A7 core @ 1200MHz and RISC-V E907GC core @ 600MHz NPU: 0.5TOPS (tera operations per second) @ INT8 precision Memory – 64MB DDR2 (V851se), 128MB DDR3L (V851s3) Storage – MicroSD card slot (supports UHS-SDR104), onboard SD NAND via SPI Display – 2-lane MIPI DSI (1280 x 720 @ 60fps), RGB LCD (320 x 240 @ 60fps) Video Input ISP with a maximum resolution […]

Khadas VIM4 SBC