Posted on

Raspberry Pi CM4 and CM4Lite Modules Launched for $25 and Up

We were expecting Raspberry Pi Compute Module 4 sometimes next year, but Raspberry Pi Trading Limited managed to launch the new module much earlier, as Raspberry Pi CM4 and CM4Lite modules have just been launched with a new, much more compact form factor incompatible with the earlier Compute Modules, an I/O board making use of the new features, and a choice of 32 models with variations in terms of memory and storage capacity, as well as the presence or lack thereof of a WiFi and Bluetooth wireless module. Raspberry Pi CM4 & CM4Lite Specifications: SoC – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz with VideoCore VI GPU System Memory – 1, 2, 4, or 8GB LPDDR4-3200 SDRAM Storage – CM4: 4, 8, 16, or 32GB eMMC flash up to 100MB/s; CM4Lite: No storage device on module Networking Gigabit Ethernet transceiver Optional Wireless module with 802.11b/g/n/ac WiFi 5 and Bluetooth […]

Posted on

Raspberry Pi Gets 5G Cellular Connectivity with Snapdragon X55 Powered HAT

The Raspberry Pi board has long been able to connect to cellular networks either via USB dongles or 3G or 4G LTE HATs that often include GPS as a bonus. But you can now connect your Raspberry Pi 4 or other RPI SBC with a 40-pin header to 5G networks thanks to Waveshare SIM8200EA-M2 5G HAT for Raspberry Pi powered by Qualcomm Snapdragon X55 multi-mode multi-band modem offering 5G/4G/3G cellular connectivity. As we can see from the photo, the 5G add-on comes as part of a cool-looking kit with bottom and top acrylic plates, spacers, a cooling fan plus five antennas for cellular and GNSS connectivity. But the HAT itself integrates a SimCOM SIM8200EA-M2 M.2 module and offers the following specifications: Compatibility – Works with Raspberry Pi boards with a 40-pin GPIO extension header Cellular Connectivity SIM8200EA-M2 core module based on Qualcomm Snapdragon X55 platform with multi-mode multi-band support 5G/4G/3G […]

Khadas Edge2 Arm mini PC
Posted on

Remodo X is a Programmable Bluetooth & IR Remote Control for Raspberry Pi (Crowdfunding)

There are plenty of Bluetooth or RF remote controls on the market, but Remodo X is a little different. Mainly designed for the Raspberry Pi board, the compact Bluetooth & IR remote control comes with four buttons that can be programmed from a mobile app to launch program or trigger scripts for home automation, home entertainment, or any other function you may think of. Remodo X specifications: Connectivity Bluetooth LE up to 30 meters (line-of-sight) via Realtek BLE 4.2 Class 2 chip IR up to 10 meters User Input – 4x keys for 8 different actions using long or short presses Misc – Buzzer for “find me” function Power Supply – 2x AAA batteries Dimensions – 114 x 36 x 13 mm Weight – 37 grams The remote control can be programmed in the yet-to-be-released Remodo app for Android or iOS with any smartphone that comes with Bluetooth LE connectivity. […]

Posted on

Petoi Bittle Palm-sized Robot Dog uses Arduino and Raspberry Pi for STEM education (Crowdfunding)

You’ve probably already watched a video featuring Boston Dynamics Spot, a headless robot dog used in various industries including healthcare, public safety, construction, oil & gas, etc.. It could also be yours if you wanted a robotic pet dog at home, as long as you have $75,000 US to spare. Petoi Bittle looks eerily similar, but it’s much smaller as it fits in your palm, and could be yours for $225 on KickStarter as a kit to assemble yourself that you may get as soon as December. Bittle robot dog is designed for STEM education and can be programmed using the Arduino IDE, Python, or even Codecraft visual programming IDE. Bittle is comprised of 4 main hardware components: Plastic parts and fixtures – Body, four legs,  head (which can be used to hold Arduino modules), springs, screws, etc… Actuators – 9x P1S servo with a controllable angle of 270 degrees, […]

Posted on

Vizy AI camera runs Tensorflow, OpenCV, PyTorch on Raspberry Pi 4 (Crowdfunding)

We previously covered Charmed Labs PIXY2 computer vision camera based on an NXP LPC4330 microcontrollers that worked with Arduino, Raspberry Pi, and other development boards. The company is now back with a fully integrated more powerful solution with Vizy AI camera featuring a Raspberry Pi 4 SBC with up to 8GB RAM. Vizy AI camera key features and specifications: SBC – Raspberry Pi 4 with Broadcom BCM2711 quad-core Arm Cortex-72 processor, up to 8 GB RAM Camera – High-resolution camera based on Sony iMX477 12.3 MP sensor that can capture at over 300 frames/second and support both daytime and nighttime viewing; Both M12 and C/CS lenses are supported Video Output – 2x micro HDMI ports Audio – Analog stereo audio port Networking – Gigabit Ethernet, dual-band WiFi 5, and Bluetooth 5.0 USB – 2x USB 3.0 ports, 2x USB 2.0, 1x USB Type-C port from Raspberry Pi 4 (But not […]

Posted on

Raspberry Pi CM3+ based Iono Pi Max industrial controller comes with an impressive number of I/Os

As the Raspberry Pi Compute Module 4 is only expected for next year, companies are still launching products based on Raspberry Pi Compute Module 3+ (CM3+), and Sfera Labs has just introduced Iono Pi Max industrial computer powered by a Raspberry Pi CM3+ system-on-module. Housed in a DIN rail enclosure, the Linux controller offers Fast Ethernet, three USB ports, isolated CAN and serial boards, some analog I/Os, a relay, as well as a real-time clock (RTC), integrated UPS, and more. Iono Pi Max specifications: SoM compatibility Iono Pi Max 3+ – Already fitted with Raspberry Pi Compute Module 3+ (Lite, 8GB, 16GB, or 32GB eMMC version) Iono Pi Max Solo – Barebone model compatible with Raspberry Pi Compute Module 3, CM3 Lite, CM3+ 8GB/16GB32GB, and CM3+ Lite MCU – Microchip SAME54 Cortex-M4F microcontroller with 1 MB flash, 256 KB RAM connected to the Raspberry Pi module via I2C, USB and […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Argon One M.2 Case for Raspberry Pi 4 Adds SATA Support, Full-Sized HDMI Ports

Yesterday, we noted that DeskPi Pro Raspberry Pi 4 case offered an interesting alternative to Argon One enclosure thanks to support for 2.5-inch SATA SSD/HDD, full-sized HDMI ports, and a PWM fan. What I did not know at the time was that Argon40 had worked on an improved version of their case with Argon One M.2 case also offering full-sized HDMI ports, support for M.2 SATA SSD storage, and a software-controlled fan. Argon One M.2 case key features and specifications: SBC – Compatible with Raspberry Pi 4 Storage – M.2 SATA SSD with Key-B or Key-B & M with UASP support on Raspberry Pi 4; Enabled via an adapter with two USB 3.0 port as shown in the render above Video & Audio Output – 2x Full-Sized HDMI ports plus AV port Expansion – Access to 40-pin GPIO header externally as in the original case Misc – Built-in IR receiver […]

Posted on

DeskPi Pro Raspberry Pi 4 Case Comes with 2.5-inch HDD/SSD Bay, Full-sized HDMI Ports, PWM Fansink

If you’d like to connect a 2.5-inch SSD or hard drive disk to your Raspberry Pi 4, and are not a fan of the micro HDMI ports, DeskPi Pro enclosure might be what you are looking for. The “Set-top Box” enclosure offers an alternative to the popular Argon One case, as it also re-arrange the ports in a more user-friendly way with most Raspberry Pi ports found on the rear panels, and the front panel adds an additional MicroSD card socket, plus two USB ports for a total of 6 USB ports, as well as a safe-shutdown & reset button. DeskPi Pro is an NUC-style aluminum alloy enclosure with front and rear acrylic panels that ensure good Wi-Fi & Bluetooth signal strength. The case also houses a low-profile ICE Tower Cooler with PWM fan and air vents for both passive and active cooling. You’ll find the utility to control the […]

Khadas VIM4 SBC