Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on Palmshell SLiM X4L is a low-cost, ultrathin mini PC based on Intel N100 Alder Lake-N SoC

Palmshell SLiM X4L is a low-cost, ultrathin mini PC based on Intel N100 Alder Lake-N SoC

Palmshell SLIM X4L ultrathin mini PC

Radxa Palmshell SLiM X4L is a low-cost, ultrathin mini PC powered by an Intel N100 Alder Lake-N SoC, equipped with 8GB to 32GB LPDDR5 RAM and a 128GB to 1TB NVMe SSD, and with a design that somewhat reminds me of the MeLE Quieter4C fanless mini PC. It’s also an update of the Palmshell SLiM X2L based on the Radxa X2L SBC powered by an Intel Celeron J4125 quad-core Gemini Lake Refresh processor and the X4L features the exact same port layout with two USB ports on the side, a USB-C port for power, a low-profile Ethernet RJ45 port, two more USB 3.2 Type-A ports on the rear panel, two HDMI outputs, a 3.5mm headphone jack, and a Kensington lock. Palmshell SLiM X4L specifications: SoC – Intel Processor N100 CPU – Quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) GPU – 24EU Intel HD Graphics @ up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on AMPCOM 8-port 2.5GbE managed switch with 10GbE SPF+ cage sells for less than $60

AMPCOM 8-port 2.5GbE managed switch with 10GbE SPF+ cage sells for less than $60

8-port 2.5GbE switch with 10GbE SFP cage

AMPCOM has launched an inexpensive, fanless 8-port 2.5GbE managed switch with one 10GbE SFP+ cage that sells for less than $60 on Aliexpress with free shipping and before taxes (if you live in Europe). Upgrading your local networking to 10GbE (10 Gbps Ethernet) can still be relatively expensive, and when I look at 10GbE switches on Amazon, most are sold for $200 to $400, and the cheapest models cost around $120. But if you don’t need multiple 10GbE ports on your switch, I’ve been informed about an inexpensive 8-port 2.5GbE managed switch with a single 10GbE SFP+ cage. And as we’ve just seen it’s possible to purchase a dual 10GbE mini PC/router for $299 (barebone), so it’s becoming more affordable than ever to switch to 10GbE networking even though not everybody may benefit from the higher speeds. AMPCOM ZX-SWTGW218AS managed switch specifications: Ports 8x 100M/1000M/2500M RJ45 ports 10GbE SFP+ port […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Tomisin Olujinmi - No Comments on iBASE IB962 3.5-inch SBC features Intel Core Ultra 5/7 SoC, up to 64GB SODIMM memory, and three M.2 slots

iBASE IB962 3.5-inch SBC features Intel Core Ultra 5/7 SoC, up to 64GB SODIMM memory, and three M.2 slots

IB962 3.5 inch SBC side view

iBASE Technology has unveiled the IB962 3.5-inch single-board computer (SBC) powered by the Intel Core Ultra 5/7 100 Series processor family (formerly Meteor Lake U/H) and delivering an “optimal balance of performance and power efficiency.” The IB962 3.5-inch SBC mostly follows the IB961 board‘s design, offering more powerful SoC options, more system memory, and an HDMI 2.0 display interface supporting 4K resolution at 60Hz. It provides dual Gigabit Ethernet networking, three USB 3.2 ports (two via pin headers), three USB 2.0 ports, and three M.2 slots (M-Key + E-Key + B-Key) for networking, storage, and cellular communication. While IB962 is not a single-board computer in the strictest sense since it uses SODIMM sockets, it is still quite compact and useful for portable or space-constrained applications. It is intended for industrial automation, manufacturing, retail, entertainment, healthcare, and various edge AI applications. It is a larger alternative to AAEON’s PICO-MTU4 Pico-ITX SBC […]

Posted on by Tomisin Olujinmi - 3 Comments on Signaloid C0-microSD is an iCE40UP5K FPGA SoM in the microSD card form factor (Crowdfunding)

Signaloid C0-microSD is an iCE40UP5K FPGA SoM in the microSD card form factor (Crowdfunding)

Signaloid iCE40UP5K FPGA SoM in use

Cambridge-based hardware and cloud computing company, Signaloid has begun crowdfunding for the C0-microSD – a tiny, programmable iCE40UP5K FPGA system-on-module (SoM) in a microSD card form factor. It comes preloaded with a RISC-V softcore and users can also load custom FPGA designs onto the board. Part of the Signaloid C0-microSD’s unique appeal is its SD card form factor, which allows it to fit in unused full SD or microSD slots. This allows the implementation of FPGA-based hardware acceleration in systems without traditional expansion interfaces like PCIe M.2 slots. It can also be interfaced with as a standard SD block device and used to bring hardware-accelerated data processing to existing industrial automation, manufacturing, and robotics systems. The iCE40UP5K FPGA SoM has two main use cases: a hot-pluggable FPGA module or a hot-pluggable RISC-V co-processor module. The SD interface allows you to load custom FPGA bitstreams and applications onto the module from […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 369 Comments on Giveaway Week 2024 – iKOOLCORE R2 Core i3-N300 mini PC and quad 2.5GbE router

Giveaway Week 2024 – iKOOLCORE R2 Core i3-N300 mini PC and quad 2.5GbE router

iKOOLCORE R2 Proxmox review

Let’s end CNX Software’s Giveaway Week 2024 with a bang! The last prize is an iKOOLCORE R2 mini PC and router powered by an Intel Core i3-N300 Alder Lake-N CPU, equipped with 8GB RAM and a 512GB NVMe SSD, and featuring four 2.5GbE ports. The tiny PC also comes with HDMI and USB-C ports for dual 4K video output, an M.2 E-Key socket to install a wireless module for WiFi and Bluetooth, two USB 3.1 Gen 2 (5 Gbps) Type-A ports, a USB 3.1 Gen 2 (10 Gbps) Type-C port with DisplayPort Alt. mode, and a not-so-useful USB-C audio port using Realtek ALC987 codec. My review of the iKOOLCORE R2 last year was a learning experience as it was the first time I used Proxmox VE and pfSense, and since I wanted to use the system both as a mini PC running Ubuntu 22.04 desktop and a router/firewall running pfSense […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Maxtang T0-FP750 review – Part 3: An AMD Ryzen 7 8845HS mini PC tested with Ubuntu 24.04

Maxtang T0-FP750 review – Part 3: An AMD Ryzen 7 8845HS mini PC tested with Ubuntu 24.04

Maxtang T0-FP750 mini PC Ubuntu 24.04 review

We’ve already checked out the hardware of the Maxtang T0-FP750 mini PC with an unboxing and a teardown in the first part of the review, before thoroughly testing the AMD Ryzen 7 8845HS mini PC in Windows 11 Pro. The time has now come to report our experience with Ubuntu 24.04, and more exactly Ubuntu 24.04.1 “dot” release, with the Maxtang T0-FT750 mini PC in the final part of the review. This will include a software overview, feature tests, benchmarks, storage and USB performance evaluation, 2.5Gbps Ethernet and WiFi 6 network performance tests, a stress test to check for thermal and/or power throttling, and fan noise and power consumption measurements. We will also compare the results of the Maxtang T0-FP750 mini PC in Ubuntu 24.04 against the ones for the earlier Maxtang MTN-FP750 mini PC using AMD Ryzen 7 7735HS CPU which we tested with Ubuntu 22.04. Ubuntu 24.04 system […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 222 Comments on Giveaway Week 2024 – Elecrow 7-inch CrowVision touchscreen display for Raspberry Pi and other SBCs

Giveaway Week 2024 – Elecrow 7-inch CrowVision touchscreen display for Raspberry Pi and other SBCs

CrowVision 7-inch display

It’s already day 6 of CNX Software’s Giveaway Week 2024, and the prize is the Elecrow 7-inch CrowVision touchscreen display designed for Raspberry Pi boards and other single board computers (SBC). Elecrow sent us a sample of the touchscreen display last year to review “whenever we have time”. But it turns out that finding time is tricky, so instead of getting it to waste, I decided to give it away to one lucky reader of CNX Software. Elecrow CrowVision 7-inch display specifications: Type – 7-inch IPS display Resolution – 1024×600 Multitouch – 5-point capacitive touchscreen Viewing angle – 178° Video Input – Mini HDMI connector USB – Micro USB port for touchscreen function Audio 3.5mm audio jack for headphones Speaker connector User input – Touchscreen and keypad interface for provided 5-key board Power Supply 12V/2A DC input via power barrel jack 5V DC output via USB Type-A port Dimensions – […]

Posted on by Tomisin Olujinmi - No Comments on Renesas RA8E1 and RA8E2 entry-level Arm Cortex-M85 MCUs target cost-sensitive applications

Renesas RA8E1 and RA8E2 entry-level Arm Cortex-M85 MCUs target cost-sensitive applications

Fast Prototyping Board for Renesas RA8E1

Renesas has expanded its Arm Cortex-M85-based RA8 series to include two new entry-level MCUs, RA8E1 and RA8E2. The new microcontrollers perform similarly to other Arm Cortex-M85-based microcontrollers and are offered at a lower price point thanks to a streamlined feature set to reduce costs. The RA8E1 and RA8E2 groups of microcontrollers will be useful for high-volume applications in industrial and home automation, healthcare, office equipment, and consumer products. We have previously covered other models in Renesas’ RA8 series, including the Renesas RA8T1, RA8D1, and the very first Cortex-M85 microcontroller, the Renesas RA8M1. The RA8 series consists of microcontrollers based on the Arm Cortex-M85 core with a performance of 6.39 CoreMark/MHz and Arm’s M-Profile Vector Extension which provides a 4x performance boost for DSP and ML workloads while maintaining low power consumption. The RA8E1 and RA8E2 Cortex-M85 microcontroller groups differ mostly in clock speed, available internal and external memory, communication interfaces, […]

Boardcon Rockchip and Allwinner SoM and SBC products