Posted on

96Boards RK1808 & RK3399Pro SoM & Devkit Now Available for Purchase

Back in April, we covered the very first 96Boards SoM’s (Systems-on-Module) which were based on Rockchip RK3399Pro or RK1808 processors, and targeted applications leveraging artificial intelligence acceleration. There were not quite available at the time, but Seeed Studio now has both BeiQi modules for pre-order for $119 and $59 respectively, while the carrier board goes with $125 with antennas, and power supply. Note that the RK3399Pro SoM and the carrier board are basically available now with shipping schedule for July 4th, but you’d had to wait until the end of the month for the RK1808 module. BeiQi RK1808 AIoT 96Boards Compute SoM Module specifications: SoC – Rockchip RK1808 dual-core Arm Cortex-A35  processor @ 1.6 GHz with NPU supporting 8-bit/16-bit operations up to 3.0 TOPS, TensorFlow and Caffe frameworks; 22nm FD-SOI process System Memory – 1GB LPDDR3 (I also read “4GB LPDRR3” (sic.) in other places, but the capacity is likely […]

Posted on

NanoPi M4 RK3399 SBC Price Drops to $50 and Up

The launch of Raspberry Pi 4 SBC has generated lots of interest, especially with the extra performance and low $35 price tag that has made most alternatives suddenly less interesting. However, Raspberry Pi 4 benchmarks show it’s not quite the fastest board around, and for example, Rockchip RK3399 platforms are still quite faster, sometimes as much as twice as fast. They do cost much more though, often more than twice, and so far one of the cheapest RK3399 boards was NanoPi M4 going for $65. FriendlyELEC has now decided, certainly in response to Raspberry Pi 4 offering, to lower the price to $50 for the 2GB RAM version which compares to $45 with Raspberry Pi 4 2GB, as well as $75 for the 4GB RAM version (was $95). NanoPi M4 specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ up […]

Advertisement
Posted on

ASUS Tinker Edge R Pico-ITX Board to Feature Rockchip RK3399Pro SoC

Just a few days ago, we wrote about ASUS Tinker Edge T board and other products from ASUS featuring Google Coral Edge TPU which were showcased at Computex 2019. It turns out the company is working on another Tinker with a processor featuring an neural network accelerator. Meet ASUS Tinker Edge R Pico-ITX SBC powered by Rockchip RK3399Pro hexa-core processor equipped with a 3.0 TOPS NPU. One of the reasons it did not get noticed is that ASUS may not have had a sample for display at the event, but instead only described the board in a brochure. [Update: ASUS Tinker Edge R was also showcased at Computex 2019] ASUS Tinker Edge R SBC preliminary specifications: SoC – Rochchip RK3399Pro hexa-core big.LITTLE processor with 2x Cortex A72 cores up to 1.8 GHz, 4x Cortex A53 cores @ 1.4 GHz, an Arm Mali-T860 MP4 GPU up to 800 MHz with OpenGL […]

Posted on

FriendlyELEC SOM-RK3399 Development Kit Targets AI & Machine Vision Applications

FriendlyELEC is better known for their low-cost tiny single board computers, but the company has also introduced systems-on-module in the past such as Smart6818 module powered by Samsung S5P6818 octa-core processor. The company has now launched another system-on-module with SOM-RK3399, which as its name implied features Rockchip RK3399 processor, as well as a corresponding carrier board mostly designed for artificial intelligence and computer vision applications. SOM-RK3399 System-on-Module Specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Cortex-A72 cores up to 2.0GHz, 4x Cortex-A53 cores up to 1.5GHz, Mali-T864 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and VPU capable of handling 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc System Memory – Dual-Channel 2GB DDR3 Storage – 16GB eMMC 5.1 flash Networking 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module (AP6356S), dual antenna interface Realtek RTL8211E Gigabit Ethernet transceiver USB – 2x USB-C […]

Posted on

ToyBrick RK3399Pro Board Shown to Outperform Jetson Nano SBC

NVIDIA created a lot of buzz when they released $99 Jetson Nano SBC featuring a 128-core Maxwell GPU, and said to deliver 472 GFLOPS of compute performance for running modern AI workloads with a power consumption of around 5 watts. But Jetson Nano is not the only low cost platform to deliver high performance at low power for AI workloads, as for example Rockchip RK3399Pro (RK1808 NPU) found in boards such as Toybrick RK3399Pro is said to deliver 3 TOPS for INT8, 300 GOPS for INT16, and 100 GOPS for FP16 inferences. Those operations per second numbers can be confusing and misleading, so it’s important to check out the performance of actual neural network models, and Rockchip did provide some RK3399Pro benchmarks last year for Inception V3, ResNet34 and VGG16 models comparing the results to Apple A11, Huawei Kirin 970, and NVIDIA Jetson TX2. However, ideally you’d want result from […]

Posted on

Orange Pi Software Releases – Android 9.0 Firmware, Linux Source Code for RK3399 / MT6737

Shenzhen Xunlong Software is used to release many different variations of their Orange Pi boards, and more often than not they tend to launch their boards fairly early before the software is fully ready. Many of their boards get supported by the community thanks to Armbian, linux-sunxi, etc… but sometimes the company does release firmware or source code themselves, as they did in the last two days with Android 9.0 firmware for one of their Allwinner H6 board, and Linux source code for Orange Pi 4G-IoT and Orange Pi RK3399. Android 9.0 for Orange Pi One Plus Launched in 2017, Orange Pi One Plus was the very first Allwinner H6 SBC launched on the market, and supported Android 7.0 at the time.  But following the release of Android 9.0 for Allwinner H6 TV boxes a few weeks ago,  you can now also upgrade your Orange Pi One Plus to Android […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Geniatech DB3399Pro RK3399Pro Development Board Comes with 8 USB Interfaces

Rockchip RK3399Pro is an upcoming processor based on Rockchip RK3399 hexa-core processor, but adding RK1808 NPU block for AI workloads. We’ve already seen a few development boards based on the processor, including Rockchip’s own evaluation board – which mortals can’t buy -, Khadas Edge 1S, Pine64 RockPro64-AI, and Toybrick RK3399Pro Board. Apart from a demo with Rockchip RK3399Pro EVB, I have not seen any of the SBCs in the wild yet. But we have even more choices now,  as Geniatech, better known for their Amlogic TV boxes, has been entering the embedded mainboard market in recent years, and added DB3399Pro development board to their offering. Geniatech DB3399Pro specifications: SoC – Rockchip RK3399Pro hexa-core processor with 2x Cortex-A72 @ 1.8 GHz, 4x  Cortex-A53 @ 1.4 GHz, Arm Mali-T864 GPU, RK1808 NPU System Memory – 3GB LPDDR3 (option 6GB) Storage – 8GB eMMC flash (option 16G/32GB), SD card socket, SATA (where?) Video […]

Posted on

Estone MJ-100 10.1″ Rugged Tablet is Equipped with Rockchip RK3399 Processor, a Barcode Scanner

Launched several years ago, Rockchip RK3399 is now a mature platform found in Chromebooks, some laptops, SBCs, and various other products. Estone Technology offers something a little different with MJ-100 rugged tablet with a 10.1″ display, IP65 waterproof rating, MIL-STD-810G shock & drop resistance, as well as ESD protection. The Android 7.1 tablet also comes with up to 4GB RAM, up to 256GB flash storage, 4G LTE connectivity, GPS / GLONASS support, and some unique features like sealed IO ports, an optional 1D/2D barcode reader, or an optional medical grade power supply. Estone MJ-100 rugged tablet specifications: SoC – Rockchip RK3399 big.LITTLE hexacore  processor with 2x Arm Cortex A72 cores @ 1.8 GHz, 4x Cortex A53 core @ 1.8 GHz, Arm Mali-T860MP4 GPU System Memory – 2GB LPDDR4 RAM (Optional: 4GB) Storage – 64GB, 128GB or 256 GB of eMMC 5.1 flash, micro SD/SDXC/SDGC/SD3.0 card slot up to 64GB Display […]

Boardcon Rockchip and Allwinner SoM and SBC products