CNX Software - Embedded Systems News

October 14, 2024 by Sayantan Nandy - 1 Comment

Infineon XENSIV game controller features PSoC 6 MCU, magnetic sensors, and OPTIGA Trust M security

Infineon Technologies XENSIV game controller is a reference design that integrates XENSIV magnetic position sensors for precise joystick control without sensor drift and XENSIV Hall switch triggers for reliable operation. The controller also features capacitive CAPSENSE buttons, CAPSENSE presence detection, and a SPIDER+ rumble driver. These components work together with the PSoC 6 BLE microcontroller to create a low-power, plug-and-play solution. The onboard display allows users to monitor joystick movements, connection status, configurations, and battery information. The controller connects to PCs or smartphones as a USB human interface device (HID) without requiring manual configuration or driver installation. It also supports Bluetooth Low Energy and uses capacitive presence detection to optimize battery life. The design includes a PSoC 6 debugger and supports customizable shields providing flexibility for software and hardware integration. Previously, we covered an Arduino Nano Matter-powered game controller that successfully ported Quake, a popular first-person shooter game. We’ve also […]

October 14, 2024October 13, 2024 by Debashis Das - 1 Comment

Wiznet W55RP20-EVB-Pico board features W55RP20 SiP with W5500 Ethernet controller and RP2040 MCU

Wiznet has recently released the W55RP20-EVB-Pico dev board, a compact board based around the W55RP20 SiP that fuses the Raspberry Pi RP2040 MCU and the W5500 Ethernet controller into a single IC, plus a 2MB flash chip for firmware storage. Just last month we wrote about W5100S-EVB-Pico2 and W5500-EVB-Pico2 dev boards, both the boards have a newer Raspberry Pi RP2350 MCU and external Ethernet controller (W5500 or W5100S). The RP2350 offers additional security features such as One Time Programmable (OTP) memory, secure boot, and Arm TrustZone technology, making it more suitable for secure applications. The W55RP20 on the other hand integrates a W5500 Ethernet controller and the RP2040 in a single SiP which is also pin-compatible with the Raspberry Pi Pico, making it easy to use existing Pico accessories and code examples. W55RP20-EVB-Pico dev board specifications: SiP– W55RP20 microcontroller MCU – Raspberry Pi RP2040 Core– Dual Cortex M0+ cores up […]

October 14, 2024October 14, 2024 by Sponsored Post - Comments Off

Get Redroad X18 high suction handheld vacuum cleaner for 40% off (Sponsored)

Redboard X18 high suction vacuum cleaner

This is a great opportunity to get an amazing X18 offer that is not to be missed! Redroad brings great value for money and offers a powerful cleaning device with the X18 cordless vacuum cleaner delivering 33,000 Pa of suction power. Thanks to its 33,000Pa suction power, the X18 easily sweeps away dirt hidden deep in carpet fibers and floor crevices. With a variety of professional brush heads that can be switched freely, it can effectively clean the crevices of sofas and the top of bookshelves to keep your home environment always clean. Redroad X18’s 33000Pa super strong suction power can easily absorb pet hair, debris, hidden in the depths of the carpet dust, and even soybean-sized particles of garbage so that the floor is quickly restored to its original cleanliness and tidyness. This prevents the user from repeating cleaning in the same location as often required with vacuum cleaners […]

October 13, 2024 by Kumpee Teeravech - 5 Comments

BeagleY-AI SBC review with Debian 12, TensorFlow Lite, other AI demos

Today I’ll be reviewing the BeagleY-AI open-source single-board computer (SBC) developed by BeagleBoard.org for artificial intelligence applications. It is powered by a Texas Instruments AM67A quad-core Cortex-A53 processor running at 1.4 GHz along with an ARM Cortex-R5F processor running at 800 MHz for handling general tasks and low-latency I/O operations. The SoC is also equipped with two C7x DSP units and a Matrix Multiply Accelerator (MMA) to enhance AI performance and accelerate deep learning tasks. Each C7x DSP delivers 2 TOPS, offering a total of up to 4 TOPS. Additionally, it includes an Imagination BXS-4-64 graphics accelerator that provides 50 GFlops of performance for multimedia tasks such as video encoding and decoding. For more information, refer to our previous article on CNX Software or visit the manufacturer’s website. BeagleY-AI unboxing The BeagleY-AI board was shipped from India in a glossy-coated, printed corrugated cardboard box. Inside, the board is protected by […]

October 12, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Arduino Nicla Sense Env module features temperature, humidity, and gas sensors from Renesas

Arduino Nicla Sense Env is a new sensor module with temperature, humidity, and gas (TVOC, NO2, O3) sensing that follows the launch of the Arduino Nicla Sense ME (Motion & Environment) module over three years ago (2021). The implementation of the new module is quite different since the ME module relies on Nordic Semi nRF52832 Cortex-M4 microcontroller and Bosch SensorTech motion and environmental sensor, but the new Nicla Sense Env module is made of parts from Renesas namely the RA2E1 Cortex-M23 microcontroller, the HS4001 humidity and temperature sensor, the ZMOD4410 gas sensor for TVOC and indoor air quality, and the ZMOD4510 gas sensor for NO2, O3, and outdoor air quality. Arduino Nicla Sense Env (ABX00089) specifications: MCU – Renesas RA2E1 Arm Cortex-M23 entry-line microcontroller (not accessible or programmable by the user) CPU core – Arm Cortex-M23 core up to 48 MHz Memory – 16KB SRAM Storage – 128KB flash Sensors […]

October 11, 2024 by Debashis Das - 2 Comments

Firefly introduces Rockchip RK3576 SoM and All-in-One carrier board compatible with NVIDIA Jetson Orin Nano and Orin NX modules

Firefly has released a Rockchip RK3576 SoM and development board called the Core-3576JD4 Core Board with a SO-DIMM edge connector and the AIO-3576JD4 carrier board respectively. The core board or the SoM is built around an octa-core 64-bit processor with a Mali G52 MC3 GPU and a 6 TOPS NPU, so it can handle demanding AI tasks while maintaining low power consumption. The AIO-3576JD4 is a full-fledged carrier board with a wide range of on-board interfaces, like dual Gigabit Ethernet ports, MIPI-CSI, HDMI 2.1, USB 3.0, USB 2.0, USB Type-C, a Phoenix connector for serial, dual-row pin headers (SPI, I2C, Line in, and Line out), an M.2 socket for 5G, a mini PCIe for 4G LTE, an M.2 socket for WiFi 6/BT 5.2, and a third M.2 socket for SATA/PCIe NVMe SSD expansion. RK3576 AI SoM and dev board specification Core-3576JD4 specifications SoC – Rockchip RK3576 CPU – Octa-core CPU […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

October 11, 2024 by Sayantan Nandy - 1 Comment

AirCard Pro and AirNotch Pro Bluetooth trackers support Google/Apple network integration (Crowdfunding)

Rolling Square introduces its latest Bluetooth trackers – AirNotch Pro and AirCard Pro – designed for use with personal items like keys, wallets, bags, and more. Both trackers are designed for portability, and the AirNotch Pro is designed as a keyring, while the AirCard Pro suits wallets with a thinner, credit card-like design. The products integrate into Apple and Google’s tracking networks, with some features currently limited to Apple. Previously, we covered the SenseCAP T1000, a credit card-sized LoRaWAN GPS tracker powered by Semtech’s LR1110. Several years ago we covered some Bluetooth beacons such as the Puck.js or RuuviTag, but we have yet to explore Bluetooth-only trackers with wireless charging capabilities. Rolling Square AirCard Pro Bluetooth trackers AirCard Pro technical features: Network White version – Operates on Google’s Android Find My Device network (Android 6 or above) Black version – Operates on Apple Find My network (iOS 14 or above) […]

October 11, 2024October 15, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MINIX NEO Z300-0dB fanless mini PC features Intel Core i3-N300 8-core CPU

MINIX NEO Z300-0dB is a fanless mini PC powered by an Intel Core i3-N300 octa-core Alder Lake-N CPU with 16GB DDR4 and up to a 512GB NVMe SSD. It built upon the MINIX NEO Z100-0dB that we reviewed with both Windows 11 and Ubuntu 22.04 and performed well albeit not quite as fast as some actively-cooled models. The NEO Z300-0dB brings a faster Core i3-N300 octa-core processor and from what I can see from the specs below, the other features remain the same. MINIX NEO Z300-0dB specifications: SoC – Intel Core i3-N300 octa-core Alder Lake-N processor @ up to 3.8 GHz (Turbo) with 6MB cache, 32EU Intel UHD Graphics; TDP: 7W System Memory – 4GB, 8GB, or 16GB DDDR4-3200 SO-DIMM memory, upgradable to 32GB Storage 128GB, 256GB, or 512GB M.2 SSD (PCIe Gen3 x4), upgradable up to 4TB (compatible with SATA SSD too) MicroSD card slot Video Output 2x HDMI […]

Boardcon Rockchip and Allwinner SoM and SBC products