CNX Software - Embedded Systems News

April 20, 2021April 20, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Terminal Block modules for Raspberry Pi Pico come with screw or DIN rail mounting option

Terminal block raspberry-pi-pico din rail mount

if you’d like to use terminal blocks with your Raspberry Pi Pico, or compatible board, instead of soldering wires to the MCU board, HCDC’s Terminal Block Breakout Module may meet your requirements with variants for either screw or DIN rail mounting. Description/specifications: PCB mount Terminal Block with 5 mm pitch, 7mm strip length, M2.5 screws – Wire range 28AWG ~ 12AWG / 2.5mm square. FR-4 fiber glass PCB, dual copper layers. Mounting options Screw version – “Taiwan high-quality” fireproof nylon material mount carrier (“not China low-quality carrier”). DIN rail version – “High-quality Taiwan” DINKLE fireproof nylon material DIN rail mount carrier (“not China low-quality carrier”); supports 35mm wide rail. I have not mentioned it in the introduction, but after reading the specifications, it appears (Xuken) HCDC may be based in Taiwan. 🙂 The company explains its Terminal Block Breakout Module for Raspberry Pi Pico is best suited to industrial control, […]

April 20, 2021April 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Linux 5.12 – Main Changes, Arm, MIPS and RISC-V Architectures

Linux 5.12 release was expected last Sunday, but Linus Torvalds decided to release one more release candidate, namely Linux 5.12-RC8, to “make sure things are all settled down“, so the latest Linux kernel is now expected this weekend. Tihs should not yield any significant changes, so we can check what’s new in Linux 5.12, notably with regards to Arm, MIPS, and RISC-V architectures often used in SoC’s found in embedded systems. Around two months ago, the release of Linux 5.11 added support for Intel’s software guard extensions (SGX) and Platform Monitoring Technology (PMT), AMD “Van Gogh” and “Dimgrey cavefish” graphics processors, MIPI I3C host controller interfaces, and much more. Some interesting changes in Linux 5.12 include: Added support for ACRN hypervisor designed for IoT & embedded devices Added support for Playstation DualSense & Nintendo 64 game controllers, as well as Nintendo 64 data cartridges Dynamic thermal power management via a […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

April 19, 2021April 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Dual Ethernet SigmaStar SSD201/SSD202 SBC supports 4-inch or 7-inch displays

SigmaStar SSD201/SSD202 are low-cost, highly integrated SoC’s with a dual Cortex-A7 processor, 64MB to 128MB on-chip RAM designed for Full HD smart displays, but we’ve also found SSD201 in a 4G LTE industrial gateway. There’s now a different type of board based on the SigmaStar processors with Wireless Tag/Industio IDO-SBC2D06-V1B-12W and IDO-SBC2D06-V1B-22W SBC’s powered respectively by SSD201 and SSD202, and both equipped with dual Ethernet and a connector for a 4-inch or 7-inch display. Specifications: System-on-Module (one or the other) IDO-SBC2D06-V1B-12W SBC – IDO-SOM2D01 module with SigmaStar SSD201 dual-core Cortex-A7 processor @ 1.2 GHz with 2D GPU, 64MB DDR2, 2Gbit SPI NAND flash IDO-SBC2D06-V1B-22W SBC – IDO-SOM2D01 module with SigmaStar SSD202 dual-core Cortex-A7 processor @ 1.2 GHz with 2D GPU, 128MB DDR3, 2Gbit SPI NAND flash Storage – MicroSD card slot Display – 4-lane MIPI DSI connector for 4-inch RGB565 display or 7-inch RGB888 display Audio – 2-pin Microphone connector […]

April 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

PiMod Zero for Raspberry Pi Zero SBC broadcasts video to your older NTSC TV (Crowdfunding)

Playing retro games or watching older movies on your Raspberry Pi Zero board over a modern digital video interface like HDMI clearly ruins the experience! 😉 While it should be possible to use to 2-pin reserved for video composite on the Raspberry Pi Zero to connect to an old TV, PiMod Zero HAT allows you to get back that retro feeling even with TVs lacking RCA composite and audio inputs by broadcasting video over VHF to older NTSC compatible televisions. PiMod Zero specifications: Operating frequency – VHF channels 2 and 3 (55.25 MHz and 61.25 MHz) Broadcast format – NTSC RF output power – 0.005 mW Impedance – 75 Ω Supply voltage – 5 V Power draw – 100 mW Dimensions – pHAT form factor The expansion board supports both color and B&W video, as well as audio. There were already solutions to achieve the same results, but Isotope Engineering […]

April 18, 2021December 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Mecool KT1 4K AV1 capable Android TV STB ships with DVB-T2 tuner

Amlogic S905X4 TV boxes such as Mecool KM6 have already been available for a few months with the main selling being support for 4K AV1 video hardware decoding. But if you’d like to watch AV1 YouTube or Netflix videos, and also get free-to-air channels using older codecs, Mecool KT1 adds a DVB-T2 TV tuner that works in the EMEA region, some Asian countries, Oceania, and a few other countries that adopted the standard. Mecool KT1 specifications: SoC – Amlogic S905X4 quad-core Arm Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G31MP2 supporting OpenGL ES3.2, Vulkan 1.1, and OpenCL 2.0 System Memory – 2 GB RAM Storage – 16GB eMMC flash, MicroSD/SDXC card socket Video & Audio Output HDMI 2.1 up to 4K @ 60Hz with CEC, HDCP2.2, HDR AV output with composite video and analog stereo audio Video Playback Codecs AV1 up to 4K @ 60 fps H.265 HEVC […]

April 17, 2021April 17, 2021 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Loongson unveils LoongArch CPU instruction set architecture for processors made in China

Loongson is a Chinese company better known for its MIPS processors, and we often see the company being mentioned in mainline Linux changelogs with regards to updated to Loongson MIPS SoC’s. But with the MIPS architecture fading away, the company has decided to create its own CPU instruction set architecture (ISA) called LoongArch, short for Loongson Architecture, that is independent of x86, Arm, and even RISC-V architecture. The reason for the move is that foreign CPU manufacturers use the instruction system as a means to control the ecology, and manufacturers like Loongsoon need to obtain “authorization” to develop compatible CPUs, meaning it’s impossible to develop an independent industrial ecosystem. Loongsoon further illustrates the point by saying “Chinese people can write novels in English, but it is impossible to form Chinese national culture based on English”. That makes sense considering the trade sanctions regularly imposed by the United States that make […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

April 16, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TinyS2 ESP32-S2 board is designed for battery operation

Unexpected Maker has launched a follow-up to the ESP32 based TinyPICO board with TinyS2 board equipped with an ESP32-S2 WiFi processor featuring 4MB flash and 2MP embedded PSRAM. The new board is still designed with a LiPo battery charging circuit, comes with an onboard RGB LED, and while it is compatible with TinyPICO form factor, it has become a little longer with a 41 x 17.8mm footprint to accommodate for extra I/Os. TinyS2 specifications: WiSoC – Espressif Systems ESP32-S2FN4R2 single-core processor @ 240 MHz with 4MP SPI flash, 2MP PSRAM Connectivity – 2.4 GHz 802.11b/g/n WiFi 4 plus 3D antenna USB – 1x USB Type-C port for power and programming Expansion – 12 + 11-pin headers for up to 17x GPIOs, SPI, I2C, UART, ADC, DAC, 5V, 3.3V and BAT signals Misc – Boot and Reset buttons, battery charging status LED, power LED, user-programmable RGB LED that can be shut […]

April 16, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Zoom i.MX 8M Mini Development Kit supports power usage monitoring

NXP i.MX 8M Mini 14nm Cortex-A53/M4 processor has been around for a couple of years, and several SoM-based development kits are available including Variscite Symphony starter kit, HummingBoard Ripple SBC, or congatec conga-SEVAL007010 evaluation board. Beacon EmbeddedWorks’ Zoom i.MX 8M mini development kit is based on the company’s i.MX 8M Nano System on Module (SOM) and offers features not found on most other devkits or single board computers such as power usage monitoring and control through their Wattson power measurement application. Zoom i.MX 8M mini development kit key features & specifications: System-on-Module SoC – NXP i.MX 8M Mini processor with up to four Arm Cortex-A53 cores @ up to 1.8 GHz, an Arm Cortex-M4 real-time core at up to 400 MHz, Vivante 3D & 2D GPU’s System Memory – Up to 8GB of 32-bit wide LPDDR4 memory Storage – eMMC flash, QSPI NOR flash Networking Gigabit Ethernet PHY Wireless module […]