CNX Software - Embedded Systems News

May 31, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Intel 5G Solution 5000 5G M.2 module developed with MediaTek, Fibocom

Qualcomm very recently unveiled Snapdragon X65 and X62 5G M.2 card reference designs to help OEM’s develop their own 5G modules for integration into PC’s and CPE’s. But as one should have expected, more options are coming, and Intel have now announced their own “5G Solution 5000” 5G M.2 card for laptops at Computex 2021 in collaboration with MediaTek and Fibocom. Fibocom FM350-GL (Intel 5G Solution 5000) specifications: Modem technologies – 5G NR, 4G LTE, 3D WCDMA Frequency bands – Sub 6GHz for global coverage Data throughput 5G NR – Up to 4.7 Gbps downlink; up to 1.25 Gbps uplink 4G LTE – Up to 1.6 Gbps Cat 19downlink; up to 150 Mbps uplink Built-in eSIM Host interface – PCIe Gen 3 Dimensions – 30 x 52 x2.3 mm (M.2 card) Temperature Range – -10 to +55°C The 5G module targets platforms built upon Intel Tiger Lake and Alder Lake […]

May 31, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mercury+ XU6 Xilinx Zynq UltraScale+ module is optimized for I/O-intensive applications

Enclustra, a company headquartered in Switzerland specializing in FPGA solutions, has recently announced the launch of the Mercury+ XU6 system-on-module based on Xilinx Zynq UltraScale+ MPSoC. The module is optimized for I/O-intensive applications with up to 294 user I/Os, up to eight 6/12.5 Gbps multi-gigabit transceivers, and available with six different variants of Xilinx MPSoC. The company also offers Mercury+ ST1 and PE1 baseboards for evaluation and early software development. Mercury+ XU6 SoM Key features and specifications: SoC – Xilinx Zynq Ultrascale+ MPSoC (ZU2CG, ZU2EG, ZU3EG, ZU4CG, ZU4EV, or ZU5EV) with: CPU ARM dual-/quad-core Cortex-A53 processor up to 1333 MHz ARM dual-core Cortex-R5 up to 533 MHz GPU – Mali-400MP2 GPU (only for EG/EV variants) Video Codecs – H.264 / H.265 Video Codec (only for EV variants) FPGA fabric – Up to 256,000 system logic cells System Memory – Up to 8 GB DDR4 ECC SDRAM (PS side) Storage – […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

May 30, 2021January 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MyCobot robotic arm is offered with Raspberry Pi 4 or M5Stack ESP32 modules

Elephant Robotics’ MyCobot robotic arm was introduced last year with M5Stack Atom & Basic ESP32 modules with 6-degrees of freedom, a 250 grams max payload, available now for $599. The company has launched a new $699 version – MyCobot-Pi – with most of the same features, except for an upgrade to Raspberry Pi 4B which offers more performance and flexibility. Both versions of MyCobot arm robotic arm support accessories such as a gripper and a suction pump attachable through a LEGO connector, but while the original version – MyCobot-M5 – relies on Arduino programming, the new MyCobot-Pi runs Debian/Ubuntu and ROS operating systems with image recognition algorithms that can work with a variety of cameras. Since we’ve missed last year’s announcement, we’ll cover both models in this article. MyCobot Robotic Arm Despite the mechanical parts being the same, the specifications for MyCobot-M5 and MyCobot-Pi differ quite a lot: Controller MyCobot-M5 […]

May 29, 2021May 29, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Nordic Semi nPM1100 PMIC combines battery charger and regulator in tiny WLCSP package

Nordic Semi is well-known for its 2.4GHz multi-protocol chips such as nRF52840 or nRF52832 that are typically found in battery-powered devices such as smartwatches with Bluetooth connectivity. But once rechargeable batteries are involved that means a charging circuit is needed, and for instance, PineTime nRF52832 based watch relies on SGMicro SGM40561 Li-Ion battery charger and SGM2036 low-power regulator. So Nordic Semi has decided to get involved in the power management business and launched its first PMIC with nPM1100 combining a USB-compatible Li-ion/Li-Po battery charger and an efficient DC/DC buck regulator in a single, compact WLCSP package. Nordic Semi nPM1100 PMIC key features and specifications: 400 mA battery charger USB compatible input regulator Up to 150 mA of regulated voltage output at 1.8, 2.1, 2.7, or 3.0 V Overvoltage protection Ship mode disables power output Low quiescent currents Drivers for charge and error LEDs Supports Lithium-Ion and LiPo batteries with a […]

May 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

T-Nixie Tube is an ESP32 based Nixie Tube lookalike

I tend to see Nixie Tube projects regularly as I spend my days going through the news, and the projects, usually some sort of clock, typically look pretty neat. But although Nixie Tubes can still be purchased online, they are not mass-produced anymore, which may explain why LilyGo decided to create a “fake” Nixie Tube, or let’s call it a lookalike, with T-Nixie Tube that comes with an IPS LCD display driven by an ESP32 WiFi & Bluetooth WiSoC. T-Nixie Tube specifications: Wireless Module – TTGO T-Micro32 module with ESP32 V3 Bluetooth and WiFi processor, 4MB Flash Display – 1.14-inch IPS LCD display covered by glass tube USB – USB Type-C port for power and programming Expansion – 4-pin I2C/UART Grove? connector for T-WATCH sensor kit or T-FH interface sensor modules Misc – PCF8563 RTC, IR receiver, TTP223 touch button, Reset button Power Supply – 5V via USB-C port Dimensions […]

May 28, 2021May 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Banana Pi BPI-M2 Pro compact Amlogic S905X3 SBC launched for $61

Banana Pi has already designed an Amlogic S905X3 SBC with Banana Pi BPI-M5 that closely follows Raspberry Pi 3 Model B form factor, but they’ve now launched a more compact model with Banana Pi BPI-M2 Pro that follow the design of the company’ earlier BPI-M2+ SBC powered by the good old Allwinner H3 processor. BPI-M2 Pro comes with 2GB RAM, 16GB eMMC storage, HDMI video output, Gigabit Ethernet, Wifi & Bluetooth connectivity, as well as two USB 3.0 ports. Banana Pi BPI-M2 Pro specifications: SoC – Amlogic S905X3 quad-core Cortex A55 @ up to 2.0 GHz with an Arm Mali-G31 GPU System Memory – 2GB LPDDR4 Storage – 16GB eMMC flash, microSD card slot Video & Audio Output – HDMI 2.1 up to 4Kp60 with HDR, CEC, EDID support Connectivity Gigabit Ethernet Dual-band 802.11 b/g/n/ac WiFi 5 1×1 and Bluetooth 4.2 via Realtek RTL8821CU module USB – 2x USB 3.0 […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

May 27, 2021June 4, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

CatsPi Industrial Lite RPi CM4 carrier board features GbE, RS485, Watchdog MCU

We’ve seen a fair deal of Raspberry Pi CM4 carrier boards, and here’s another one courtesy of QwaveSystems with CatsPi Industrial Lite board following Raspberry Pi SBC form factor/dimensions, and equipped with Gigabit Ethernet, RS485, USB ports, as well as a watchdog MCU among other interfaces and features. Contrary to what the name implies, CatsPi Industrial Lite only works with Raspberry Pi CM4 with eMMC flash, but not the CM4 Lite module since there’s no MicroSD card on the baseboard. It’s not the first Raspberry Pi Compute Module 4 carrier board with RS485, however, as we previously covered CM Hunter also including CAN and 1-wire interfaces, but QwaveSystems’ solution is more compact and mostly mechanically compatible with Raspberry Pi model B SBC’s. CatsPi Industrial Lite board specifications: Compatible SoMs – Raspberry Pi CM4 with eMMC flash only Video Output – Micro HDMI port Connectivity – Gigabit Ethernet, optional 802.11b/g/n/ac WiFi […]

May 27, 2021 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

USB Type-C Specification 2.1 allows up to 240W Extended Power Range (EPR)

Many devices have switched from a Micro USB port or a power barrel jack to the USB-C port in recent years, as the latter allows for higher currents, and up to 100W power input in USB PD (Power Delivery) compliant systems. While 100W will be more than enough for most devices, more power-hungry devices or systems still need a power brick, for example, gaming laptops and mobile workstations. But the USB Type-C specification 2.1 aims to change that by upping the maximum power to 240W. As noted by Benson Leung in a Reddit Thread the part of the specification that handles the 240W power is the EPR (“Extended Power Range”) that defines requirements for cables, chargers, and devices: 3.11 Extended Power Range (EPR) Cables 3.11.1 Electrical Requirements Extended Power Range cables have additional requirements to assure that these cables can deliver the full defined voltage and current range for USB […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications