CNX Software - Embedded Systems News

June 21, 2021July 12, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

RasPad 3 Review – Part 2: A Raspberry Pi 4 mini PC with integrated display

I started RasPad 3 review last week with an unboxing of the tablet shell for Raspberry Pi 4, together with assembly instructions, and a first boot after flashing Raspad OS to the system. In the first part of the review, I mentioned that I’d probably focus the remainder of the review on Ezblock Studio visual programming IDE, as the rest of the software is almost the same as using a standard Raspberry Pi 4, the other difference being the touchscreen-friendly RasPad launcher. But Sunfounder explained to me it would be hard to check out Ezblock as it’s designed to control robots and other hardware platforms, and requires an extra HAT (see Kickstarter campaign) to allow the Ezblock APP to connect through Bluetooth (it cannot be directly linked to Raspberry Pi through the built-in Bluetooth). Here’s an example of a robot that is compatible with Ezblock Studio: Picar-X. Finally, I was […]

June 20, 2021June 20, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Royole RoKit – A flexible display development kit with a Snapdragon 660 board

Snapdragon 660 flexible display development kit

The Royole RoKit is a flexible display development kit with a Qualcomm Snapdragon 660 board running Android 10 operating system. The kit includes a 7.8-inch “fully flexible” display and corresponding touchscreen module. The mainboard is also equipped with on-board wireless connectivity, a gyroscope, a speaker, and more, and the kit ships with modular extension boards, data and power cables all packed into a suitcase. Royole RoKit content and main specifications: 7.8-inch fully flexible AMOLED display module (FFD); 1440 x 1920 @ 60Hz; 16.7M colors, 300 nits, connected via MIPI DSI connector 7.8-inch fully flexible touch-capacitive sensor module (FFS) connected via I2C. Android 10 development mainboard with SoC – Qualcomm Snapdragon 660 octa-core processor at 2.2GHz System Memory – 3GB RAM Storage – 32GB flash Audio – 0.7W speaker Connectivity – On-board 802.11b/g/n/ac WiFi 5 + Bluetooth 5.0 USB – USB Type-C for System Data Sensor – Gyroscope HDMI transfer board […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

June 19, 2021 by Saumitra Jagdale - 2 Comments

Digi ConnectCore 8M Mini SOM and Mini Development Kit for Industrial IoT Applications

Digi International has announced the Digi ConnectCore 8M Mini System-on-Module (SOM) which is an addition to its ConnectCore family modules. We saw the Android application development kit featuring earlier Digi Wireless modules based Freescale i.MX51 (ConnectCore Wi-i.MX51) and i.MX53 (ConnectCore Wi-i.MX53) in early 2012. The new Digi ConnectCore 8M Mini comes with a built-in Video Processing Unit specialising in vision use cases. The Digi ConnectCore 8M Mini SOM is an industrial i.MX 8M Mini quad-core system-on-module that comes with Arm Cortex-A53 cores, one Cortex-M4 core, and the Cortex-M0-based Digi Microcontroller Assist. This enables optimal power consumption while simultaneous maintenance of highly efficient performance. Main benefits of Digi Connect Core 8M Mini SOM Digi SMTplus form factor (40 x 45 mm) for flexibility and reliability while designing. Power management with both hardware and software support for low-power designs. Display and camera capabilities with graphics and video hardware acceleration make it suitable […]

June 18, 2021August 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

KloudNote 10.3-inch E-reader supports WiFi, Bluetooth and cellular connectivity

Geniatech used to be better known for their Amlogic TV boxes, before expanding their business to development boards and systems-on-modules. But the company has now introduced KloudNote, a 10.3-inch E-reader running Android 8.1 on a quad-core Cortex-A35 processor. The device is equipped with 2GB of RAM and a 16GB eMMC flash, supports WiFi 5 and Bluetooth, as well as optional 2G/3G/4G LTE cellular connectivity, and comes with a USB-C port and a headphone jack. KloudNote (sometimes written Kloud Note) specifications: SoC – Unnamed quad-core Cortex-A35 processor @ 1.2 GHz System Memory – 2GB RAM Storage – 16GB or 32GB eMMC flash Display – 10.3-inch E-Ink flexible screen with cover-lens, 1872×1404 resolution, capacitive touch and electromagnetic touch with support for a stylus with 4096-level of pressure sensitivity Connectivity 802.11 a/b/g/n/ac WiFi 5, Bluetooth 4.2 Optional 2G/3G/4G Audio – Earphone jack, built-in speaker & microphone USB – 1x USB-C port for charging Documents […]

June 18, 2021December 8, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

TI AM64x 7-core processor is made for PLC’s, motor drives, industrial robots

Texas Instruments AM64x is a family of 64-bit Arm processors with functional safety designed for Programmable Logic Controllers (PLC), motor drives, remote I/O, and industrial robots. The top-end processor of the family, AM6442, comes with seven cores including two Cortex-A53 application cores, four Cortex-R5F real-time cores, and one Cortex-M4F isolated core. AFAICT, while the documentation is dated January 2021 and TI announced the processor in February in a blog post with a cryptic title, it was only first picked up by Embedded Computing in early May. Besides the processor itself, TI also provides an AM64x starter kit and a full-featured AM64x evaluation kit, and several companies are already preparing development boards and modules as we’ll see further below. TI AM64x processor AM64x key features & specifications: CPU cores Dual-core Arm Cortex-A53 processor @ 1.0 GHz with 256KB L2 shared cache with SECDED ECC, 32KB L1 D-cache, 32KB L1 I-cache Up […]

June 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

paperd.ink 4.2-inch ESP32-based e-Paper display ships with a 3D printed enclosure (Crowdfunding)

We’ve covered a fair amount of connected e-Paper/e-Ink displays based on ESP32 WiFi & Bluetooth SOC including several Inkplate displays, with the latest Inkplate 6Plus model including a touchscreen, TTGO T5 displays with small sizes, or even the fully enclosed M5Paper ESP32 IoT development kit with a 4.7-inch touchscreen e-Paper display. There’s also Watchy ESP32 smartwatch with a 1.54-inch display if you really need something small. But here’s another option courtesy of Rohit & Prasad, two young engineers from India, with the paperd.ink 4.2-inch ESP32-powered e-Paper display that ships with an optional 3D printed enclosure. paperd.ink display specifications: Wireless module – ESP32-WROOM-32 module with ESP32 dual-core processor, 4 MB SPI flash, 2.4 GHz WiFi 4 & Bluetooth LE connectivity Storage – MicroSD card slot for storing images, files, etc Display – 4.2″ monochrome e-Paper display with 400 x 300 resolution; 3s for full refresh; partial refresh supported USB – 1x […]

June 17, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Picovoice offline Voice AI engine now works on Arduino

Last year, I wrote about Picovoice support for Raspberry Pi enabling custom wake-word and offline voice recognition to control the board with voice commands without relying on the cloud. They used ReSpeaker 4-mic array HAT to add four “ears” to the Raspberry Pi SBC. I also tried to generate a custom wake-word using the “Picovoice Console” web interface, and I was able to use “Dear Master” within a few minutes on my computer. No need to provide thousands of samples, or wait weeks before getting a custom wake-word. It’s free for personal projects. But the company has now added Picovoice to Arduino, or more exactly Arduino Nano 33 BLE Sense powered by a Nordic Semi nRF52480 Arm Cortex-M4F microcontroller, and already equipped with a digital microphone, so no additional hardware is required for audio capture. To get started, you’d just need to install the Picovoice Arduino library, load the sample […]

June 17, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Modelplace.AI is an app store for OpenCV compatible AI models

OpenCV open-source computer vision library is used in a wide variety of projects and products, and last year, the community also launched the OpenCV AI Kit (OAK) Myriad X-based hardware solution for computer vision. However there’s a learning curve to use the library, especially in combination with artificial intelligence models, and it can be challenging and time-consuming to newcomers. So in order to broaden the reach of the solution, OpenCV has now introduced Modelplace.AI, an app store/marketplace for AI models working with the OpenCV library. The AI model marketplace is a store and try-before-you-buy service for artificial intelligence models, many of which are certified to work with the OpenCV AI Kit. There are currently over 40 models for detection (e.g. person, pedestrian…), classification, segmentation (e.g. extraction of objects from a scene), pose estimation, people counting, text detection, tracking, and more. Right now all models are free, but developers will be […]