Posted on

Ascella USB 3.0 Camera Reference Design Kit Supports 4K Recording at 30 fps

Cypress Semiconductor and THine Electronics have recently introduced Ascella USB 3.0 camera reference design kit based on Cypress EZ-USB CX3 USB 3.0 camera controller and THIne THP7312 ISP that supports 13-megapixel resolution at 21 frames per second, and 3840x2160p recording at 30 fps using MJPEG compression. The kit is composed of 5 boards with an OV13850 13MP camera board, an LED board, the ISP board, Cypress CX3 board, and a debug board with USB 3.0 and a debug interfaces. Main specifications and features:   Cypress EZ-USB CX3 ARM9 based Programmable MIPI CSI-2 to USB 3.0 Camera Controller THine THP7312 image signal processor based on a 32-bit RISC CPU OmniVision OV13850 Image sensor interfaced through a four-lane MIPI CSI-2 interface High Intensity LED Board for Low light environment SPI Flash for firmware storage Supports auto-focus, auto-exposure, auto-white-balance and the ability to select from 20 picture resolutions Support for streaming of live […]

Posted on

Touchjet WAVE Adds Android and Touchscreen Capability to Your TV (Crowdfunding)

There are already ways to convert your TV into a smart TV running Android with touchscreen support, but you’d need to buy an Android mini PC and a infrared touch frame overlay for your TV both of which should cost several hundred dollars in total, and the larger your TV the costlier the price, and once you get the hardware, you may also need to modify your kernel source code to enable USB touchscreen… A US start-up is now working on a much cheaper and easier way to achieve this with Touchjet WAVE, a quad core Android mini PC that integrates an infrared sensor to track finger movements and taps across the screen of your existing TV. Touchjet WAVE specifications: SoC – Quad-core ARM Cortex A9 processor @ 2.0 GHz (Likely Amlogic S802 or S812) System Memory – 1GB DDR3 Storage – 8GB flash Video Output – HDMI 1.4 Touchscreen […]

Khadas Edge2 Arm mini PC
Posted on

Fitlet H mini PC is Powered by AMD A10 Micro-6700T SoC

At the beginning of the year, Compulab announced several Fitlet mini PCs powered by AMD Mullins processors. Missing from the original offering was the top of the line A10 Micro-6700T quad core processor, but the company’s latest Fitlet H integrates the more powerful, yet still low power, processor. Fitlet H specifications: SoC – AMD A10 Micro-6700T 64 bit quad-core processor @ up to 2.2 GHz with AMD Radeon R6 Graphics (4.5W TDP). System Memory – 2x SODIMM slots for up to 16 GB DDR3L-1333 Storage – Internal 2.5” HDD/SSD (SATA 3.0) + mSATA 3.0 + micro-SD Video Output – 2x HDMI 1.4a up to 1920 x 1200 @ 60Hz Audio – Realtek ALC888-VC2 HD audio codec; S/PDIF 7.1 input/output + stereo line-out / MIC in Connectivity 2x Gigabit Ethernet (Intel i211 Ethernet controllers) WLAN 802.11ac (2.4/5GHz dual band Intel 7260HMW) + Bluetooth 4.0 with two external antennas Cellular – mini-PCIe for […]

Posted on

PiPo X1 is a Windows 10 Bay Trail HDMI TV Stick

PiPo used to the mostly know for its low cost tablets, but then they started launching ARM based mini PCs, and followed with x86 mini PCs such as the popular PiPo X7. Netbook Italia found out the company is now working on a new HDMI TV stick that will run Windows 10, but they must have run out of “lucky” names because the product will apparently be called PiPo X1, a name they already used for a Rockchip RK3188 TV stick… The hardware is not really interesting, as it has basically the same specs as the other Bay Trail-T sticks on the market: SoC – Intel Atom Z3735F  “Bay Trail” quad core processor @ 1.33 GHz (Bust frequency: 1.83 GHz) with Intel HD graphics Gen 7 System Memory – 2 GB Storage – 32 GB eMMC + micro SD slot up Video & Audio Output – HDMI Connectivity – 802.11 […]

Posted on

Banana Pi BPI-M3 Development Board Features Allwinner A83T Octa core Processor

Banana Pi developers, in this case SinoVoIP, and not LeMaker, are about to launch a new board: BPI-M3 powered by Allwinner A83T octa core Cortex A7 processor with 2GB RAM and 8GB eMMC. Banana Pi M3 board specifications: SoC – Allwinner A83T octa-core ARM Cortex-A7 @ 2.0 GHz with PowerVR SGX544MP GPU supporting OpenGL ES 2.0/1.1, OpenCL 1.1, DX 9.3. System Memory – 2 GB LPDDR3 Storage – 8 GB eMMC + SATA (via Genesys GL830 USB bridge, shared with 2 USB ports) + micro SD slot Display Interfaces / Video Output – HDMI 1.4 up to 1920×1200, MIPI DSI connector Audio – 3.5mm headphone jack, microphone, HDMI audio Camera I/F – MIPI CSI and Parallel camera interfaces Connectivity – Gigabit Ethernet (Realtek RTL8211E/D), 802.11 b/g/n Wi-Fi and Bluetooth 4.0 (AP 6212 module) USB – 2x USB 2.0 host port, 1x micro USB OTG Debugging – UART for console Headers […]

Posted on

Allwinner R58 Octa-core Processor Targets 2-in-1 Android Laptops

Allwinner R-series processor family, such as Allwinner R8, is supposed to target “IoT applications”, but IoT must have recently taken a whole new meaning as the latest Allwinner R58 octa-core processor targets 2-in-1 laptops running Android. Allwinner website however lists R58 as an high-end IoT platform for virtual reality and robotics. Allwinner R58 specifications: CPU – Octa-Core Cortex-A7 CPU up to 2.0 GHz GPU – PowerVR SGX544 GPU @ 600 MHz with support for OpenGL ES 2.0/1.1, OpenCL 1.1, DX 9_3 Memory 32-bit DDR3/DDR3L/LPDDR3/LPDDR2 SLC/MLC/TLC/EF NAND with 64-bit ECC eMMC V4.5 Video 1080p@60fps video playback multi-format video playback, including H.264, MPEG1/2, MPEG4 SP/ASP GMC, H.263 including Sorenson Spark, WMV9/VC-1, JPEG/MJPEG, etc H.264 1080p@60fps or 720p@120fps video capture Display LVDS up to 1366×768@60fps or RGB LCD up to 2048×1536@60fps 4-lane MIPI DSI up to 1920×1200@60fps HDMI up to 1080p@60fps, HDCP V1.2 supported Dual display supported with LCD up to 720p@60fps and […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Allwinner T2 Dual Core Processor is Made for Automotive Infotainment and Navigation

Allwinner already has several processor families, the most famous being the A-series for tablets, followed bythe H-series for home entertainment, the V-series for video application, the R-series for IoT as found in R8 module used in C.H.I.P $9 computer, and now I’ve just found out the company launched T-series with Allwinner T2 and T8 for “Transportation”/automotive applications. I don’t have any details about T8 processor, but the company kindly shared a product brief with the specs for Allwinner T2: CPU – Dual core Cortex A7 CPU – Mali-400MP2 supporting OpenGL ES 1.1/2.0 Memory – DDR2, DDR3, and DDR3L controller, NAND flash controller with 64-bit ECC Video Inputs – 4x AV Inputs Video – H.264 2160p video decoding, multi-format decoding, h.264 encoding @1080p30 / 720p60. Display – Multi-channel HD display with integrated HDMI 1.4 transmitter, CPU/RGB/LVDS display interface, support for VGA/CVBS/YPbPr, and integrated TV decoder. Camera – Integrated parallel 8-bit interface YUV sensor, […]

Posted on

Wintel W8 Review – Dual Boot Android & Windows TV Box

Wintel W8 (aka Kingnovel K8) is an Intel Atom Z3735F mini PC inspired from Sunchip Wintel CX-W8 (the hardware is a little different), but instead of just running Windows 8.1, the device can dual boot Android 4.4 and Windows 8.1 with Bing. I’ve already taken pictures or torn down Wintel W8, so today, I’ll focus on the software part of the review, first checking dual boot functionality and Windows 8.1 briefly since it should be very similar to MeLE PCG03, before spending more time on Android as it’s my first Android Intel platform. Dual boot in Wintel W8 When you boot the device, you can select Android or Windows icon, with a 10 second timeout that will boot your latest choice. There’s no menu within Windows to start Android, and vice versa, so to dual boot you need to reboot first, and select the operating systems right after UEFI. The […]

Khadas VIM4 SBC