Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on AAEON PICO-MTU4 Pico-ITX SBC features Intel Core Ultra 5/7 “Meteor Lake” SoC

AAEON PICO-MTU4 Pico-ITX SBC features Intel Core Ultra 5/7 “Meteor Lake” SoC

Pico-ITX SBC with Intel Core Ultra Meteor Lake SoC

The AAEON PICO-MTU4 Pico-ITX SBC may be the world’s smallest platform based on 14th Gen Intel Core Ultra 5/7 SoCs part of the Meteor Lake-U family and follows the company’s UP Xtreme i14 SBC introduced a couple of months ago with the same processors, although the new model is limited to 15W parts due to its small size (100x72mm). The Core Ultra 5/7 Pico-ITX SBC comes with up to 64GB DDR5 memory, supports NVMe and SATA storage, offers 2.5GbE and GbE networking, M.2 Key-M and Key-E sockets for storage or/and wireless expansion, dual display support through HDMI and eDP, a few USB interfaces, and two RS232/RS422/RS485 interfaces. AAEON PICO-MTU4 specifications: Meteor Lake-U SoC (one of the other) Intel Core Ultra 7 165U 12-core (2P+8E+2LPE) processor @ 1.7 / 4.9  GHz with 12MB cache, Intel 4Xe LPG graphics @ 2.0 GHz, Intel AI Boost NPU; TDP: 15W Intel Core Ultra 7 […]

Posted on by Tomisin Olujinmi - 2 Comments on 200 MHz Microchip dsPIC33A 32-bit digital signal controller offers double-precision FPU, high speed analog interfaces

200 MHz Microchip dsPIC33A 32-bit digital signal controller offers double-precision FPU, high speed analog interfaces

dsPIC33A DSC

Top digital signal controller (DSC) vendor, Microchip Technology Inc., has launched the dsPIC33A series as the newest addition to its portfolio of high-performance DSCs. These digital signal controllers combine the capabilities of a digital signal processor (DSP) with the extensive peripherals of a microcontroller (MCU). The dsPIC33A series is built around a 32-bit architecture and operates at 200MHz – currently the highest clock speed for a dsPIC. The core includes a double-precision floating-point unit (DP FPU) and a DSP instruction set for numerically intensive operations in closed-loop control algorithms. The dsPIC33A architecture offers high-performance, high-precision real-time control and signal processing in various applications. The family of DSCs launching the dsPIC33A series, dsPIC33AK128MC1xx, features up to 128KB of flash memory, and an extensive set of built-in peripherals. It comes in different packages, including SSOP, VQFN, and TQFP, with pin counts ranging from 28 to 64 and sizes starting as small as […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on M5Stamp Fly ESP32-S3 WiFi drone is controlled by the M5Atom WiFi joystick controller using ESPNOW

M5Stamp Fly ESP32-S3 WiFi drone is controlled by the M5Atom WiFi joystick controller using ESPNOW

M5Stamp Fly ESP32 Drone

M5Stack M5Stamp Fly is a tiny ESP32-S3 WiFi drone based on the company’s M5Stamp S3 WiFi 4 and BLE IoT module, equipped with four motors and several sensors. and controllable the M5Atom WiFi joystick controller also based on ESP32-S3 WiSoC. We have recently seen some tiny ESP32 or ESP8266 WiFi drones with a low-cost ESP32 DIY drone and the PiWings 2.0 drone, but the M5Stamp Fly is more advanced with a total of six sensors including a barometer, two time-of-flight distance sensors, a 6-axis IMU, a 3-axis magnetometer, and an optical flow detection sensors, plus two Grove connector for additional sensors or modules. M5Stamp Fly (K138) specifications: Main controller – M5Stamp S3 module WiSoC – Espressif Systems ESP32-S3FN8 dual-core 32-bit Xtensa LX7 microcontroller with AI vector instructions up to 240MHz, RISC-V ULP co-processor, 512KB SRAM, 2.4GHz WiFi 4 (802.11b/g/n), Bluetooth 5.0 BLE + Mesh, 8MB flash Connectivity 2.4 GHz WiFi […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Rockchip RK3576 castellated SoM powers development board with 12 analog camera inputs

Rockchip RK3576 castellated SoM powers development board with 12 analog camera inputs

Rockchip RK3576 SBC 12 analog cameras

Boardcon CM3576 is a system-on-module (SoM) Rockchip RK3576 with castellated holes that also powers the company’s EM3576 development board with 12 analog camera inputs among a range of other interfaces. We covered a few Rockchip RK3576 platforms in recent weeks including the Firefly ROC-RK3576-PC and Banana Pi BPI-M5 SBCs, and another system-on-module with the Forlinx FET3576-C with four 100-pin board-to-board connectors. The Boardcon CM3576 offers another option as a solderable SoM with castellated edges. Boardcon CM3576 SoM Specifications: SoC – Rockchip RK3576 CPU 4x Cortex-A72 cores at 2.3GHz, 4x Cortex-A53 cores at 2.2GHz Arm Cortex-M0 MCU at 400MHz GPU – ARM Mali-G52 MC3 GPU with support for OpenGL ES 1.1, 2.0, and 3.2, OpenCL up to 2.0, and Vulkan 1.1 NPU – 6 TOPS (INT8) AI accelerator with support for INT4/INT8/INT16/BF16/TF32 mixed operations. VPU Video Decoder – H.264, H.265, VP9, AV1, and AVS2 up to 8Kp30 or 4Kp120 Video Encoder – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Pineboards introduces Ai Bundle (Hailo 8L) Raspberry Pi HAT+ with AI accelerator and NVMe SSD support

Pineboards introduces Ai Bundle (Hailo 8L) Raspberry Pi HAT+ with AI accelerator and NVMe SSD support

Pineboards AI Bundle (Hailo 8L)

Pineboards has launched yet another Raspberry Pi 5 HAT+ expansion board with the Ai Bundle (Hailo 8L) which includes a 13 TOPS Hailo 8L AI accelerator and an M.2 PCIe socket for an NVMe SSD. The latest Raspberry Pi 5 HAT+ from Pineboards combines the capabilities of the official Raspberry Pi AI Kit and Raspberry Pi M.2 HAT+ into a single board, while supporting longer M.2 2280 NVMe SSD drives, besides shorted 2230 and 2242-sized SSDs. Pineboards Ai Bundle (Hailo 8L) specifications: Compatible SBC – Raspberry Pi 5 Storage – M.2 2230/2242/2280 M-Key socket for NVMe SSD AI accelerator – M.2 2230 A/E-Key socket fitted with Hailo 8L AI Accelerator (and thermal pad) PCIe switch – ASMedia ASM1182e PCIe Gen2 x1 to 2x PCIe Gen2 x1 Host interface – 20-pin Raspberry Pi PCIe FFC connector Accessories – FPC cable, metal screws and spacers (no low-quality plastic screws…) Dimensions – About […]

Posted on by Sayantan Nandy - 1 Comment on NBIOT/LTE-M Air Monitor – A solar-powered ESP32-S3 multi-sensor board with SIM7080G NB-IoT & LTE-M modem

NBIOT/LTE-M Air Monitor – A solar-powered ESP32-S3 multi-sensor board with SIM7080G NB-IoT & LTE-M modem

nbiotlte m air monitor air temperature humidity light co2

The NBIOT/LTE-M Air Monitor is a solar-powered device that utilizes a combination of ESP32-S3 and SIM7080G modules for remote environmental monitoring. It monitors and transmits environmental parameters such as temperature, humidity, CO2, TVOC, and light intensity using low-power wide-area network (LPWAN) technology ensuring efficient power consumption, durability, and reliable data transmission. Previously we have written about similar environment monitor devices like the Airlytix ES1,  Sonoff SC WiFi, V-Air Monitro, and devices like Arduino MKR IoT Carrier Rev2, Radair mini gateway, and Nicla Sense ME  designed for environment monitoring applications. Feel free to check those out if you are interested in this type of product. NBIOT/LTE-M Air Monitor specification Wireless Module – ESP32-S3-WROOM-1-N16R8 Espressif Systems ESP32-S3R8 – Dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, 8MB PSRAM Storage – 16 MB flash Wireless – 2.4 GHz WiFi 4 and Bluetooth PCB antenna Cellular connectivity Module – SIMCom SIM7080G LTE Cat […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on The Open Home Foundation adds HACS, microWakeWord, and Music Assistant open-source projects

The Open Home Foundation adds HACS, microWakeWord, and Music Assistant open-source projects

Open Home Foundation adds HACS, microWakeWord, Music Assistant

HACS, microWakeWord, and Music Assistant projects have joined the Open Home Foundation launched a few months ago to manage open-source projects related to Home Assistant and Smart Home applications in general separating them from Nabu Casa’s commercial activities. Note the HACS, microWakeWord, and Music Assistant projects will not operate directly under the Open Home Foundation’s umbrella, but they are external projects that the foundation collaborates on since it believes those are projects worth investing in to further develop the Smart Home ecosystem. Let’s have a quick look at the three projects. Home Assistant Community Store (HACS) is the most used custom integration for Home Assistant and allows users to easily install custom integrations, cards, and themes. Music Assistant gives users control over their media players and audio files handling both local music collection and music streaming services so that users can play any tune anywhere in their house without restrictions. […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Rockchip RK3588-powered Orange Pi 5 Max SBC features up to 16GB LPDDR5, 2.5GbE, onboard WiFi 6E and Bluetooth 5.3

Rockchip RK3588-powered Orange Pi 5 Max SBC features up to 16GB LPDDR5, 2.5GbE, onboard WiFi 6E and Bluetooth 5.3

Orange Pi 5 Max SBC

Initially teased at the Orange Pi Developer Conference earlier this year, the Orange Pi 5 Max SBC powered by a Rockchip RK3588 SoC is now available on Amazon and Aliexpress for $95 and up with 8GB or 16GB LPDDR5, and support for eMMC flash modules or soldered on eMMC flash. A 4GB RAM version is also planned for $75. The Orange Pi 5 Max is basically a cost-down version of the Orange Pi 5 Plus with fewer interfaces (e.g. 1x 2.5GbE vs 2x 2.5GbE, no HDMI input, etc..), higher bandwidth LPDDR5 memory, onboard WiFi 6E and Bluetooth 5.3, and a smaller form factor between Pico-ITX and credit card size. Orange Pi 5 Max specifications: SoC – Rockchip RK3588 CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz Arm Mali-G610 MP4 GPU with support for OpenGL ES1.1/2.0/3.2, OpenCL 2.2, […]

Boardcon Rockchip and Allwinner SoM and SBC products