CNX Software - Embedded Systems News

September 27, 2021September 27, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

ANAVI Gardening uHAT adds soil and other sensors to Raspberry Pi (Crowdfunding)

We’ve been covering and reviewing ANAVI open-source hardware boards for several years now, either standalone boards based on ESP8266, or add-on boards for Raspberry Pi. The ANAVI Gardening uHAT is the latest board from Leon Anavi. It is a micro HAT designed for Raspberry Pi Zero to Raspberry Pi 4 SBCs that offers interfaces for soil sensors and other environmental sensors allowing measurements of soil moisture, atmospheric pressure and humidity, temperature with a waterproof sensor, and light intensity for gardening applications. ANAVI Gardening uHAT key features and specifications: Compatibility – Any Raspberry Pi board with a 40-pin GPIO header Storage – EEPROM for uHAT compliance 2x 3-pin headers for capacitive soil moisture sensors connected to Microchip MCP3002 ADC chip 3-pin One-wire terminal block for a waterproof temperature sensor 2x 4-pin I²C headers for additional sensors 10-header with GPIO pins for controlling irrigation systems and peripherals Misc – 2x user LEDs, […]

September 27, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Geniatech GTW410 – An ultra compact IoT gateway based on Snapdragon 410E SoC

After writing about Azulle Ally Snapdragon 450 mini PC, I was reminded there are other small form factor Snapdragon devices such as Geniatech GTW410 based on the earlier Snapdragon 410E quad-core processor. While the GTW410 is marketed as an “Embedded IoT Gateway”, it could also serve as an entry-level industrial mini PC with up to 2GB RAM, 16GB eMMC flash, as well as HDMI, Ethernet, and USB ports. Geniatech GTW410 specifications: SoC – Qualcomm Snapdragon 410E (APQ8016) quad-core ARM Cortex A53 processor @ 1.2 GHz with Adreno 306 GPU System Memory – 1 or 2 GB LPDDR3 @ 533MHz Storage – 8 or 16 GB eMMC 5.0 flash + micro SD 3.0 (UHS-I) slot Video Output – HDMI 1.3 up to 1080p @ 30 Hz Connectivity – 10/100M Ethernet, Integrated 802.11 b/g/n, Bluetooth 4.1, GPS with on-board antenna, optional Zigbee USB – 2x USB 2.0 host ports, 1x micro USB […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

September 26, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Raspberry Pi smart audio devkit features AISonic IA8201 DSP, microphone array

Knowles AISonic IA8201 Raspberry Pi development kit is designed to bring voice, audio edge processing, and machine learning (ML) listening capabilities to various systems, and can be used to evaluate the company’s AISonic IA8201 DSP that was introduced about two years ago. The kit is comprised of three boards with an adapter board with three buttons connecting to the Raspberry Pi, as well as the AISonic IA8210 DSP board itself connected via a flat cable to a microphone array. Knowles AISonic Raspberry Pi development kit Knowles did not provide the full details for the development but says it enables wake-on-voice processing for low latency voice UI, noise reduction, context awareness, and accelerated machine learning inferencing for edge processing of sensor inputs. Some of the use cases include Low Power Voice Wake to listen for specific OEM keywords to wake the host processor, Proximity Detection when combined with an ultrasonic capable […]

September 25, 2021September 29, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

SONOFF Smart Stackable Power Meter supports up to 128 20A relays

ITEAD has introduced many smart switches over the year under the SONOFF brand, and their latest SONOFF Smart Stackable Power Meter is DIN mountable and made for larger industrial applications with up to 128 devices. The solution is comprised of the “SPM-Main” WiFi connected main unit controlling up to 32 “SPM-4Relay” units with 4 relays each using RS485 daisy-chaining. SPM-Main specifications: Storage – MicroSD card slot up to 32GB to store up to 180 days of energy usage data Connectivity Ethernet 2.4 GHz 802.11b/g/n WiFi 4 RS485 master Power Input – 100-240V 50/60Hz up to 50mA max Dimensions – 142.5 x 90 x 66.5 mm (PC V0 material) SPM-4Relay specifications: Connectivity – RS485 Power Input – 100-240V 50/60Hz up to 20A per relay, 80A total Power Output – 100-240V 50/60Hz up to 20A per relay, 80A total Safety – Current, voltage, and power overload protection with delay function from 0 […]

September 24, 2021April 26, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

SolidSense N8 IoT Compact gateway supports Wirepas Massive

SolidRun “SolidSense N8 IoT Compact” is a Linux Edge gateway based on NXP i.MX 8M Nano Solo processor that offers Gigabit Ethernet, WiFi 5, Bluetooth 5.0, and optional 4G LTE Cat 4 & GPS connectivity, plus Wirepas Massive (previously Wirepas Mesh networking) via a module based on Nordic Semi nRF52832 wireless Cortex-M4 microcontroller. The gateway comes with 1GB RAM, 8GB storage, offers optional RS485 and CAN interfaces, and targets IoT applications such as smart metering, automation, asset tracking, safety & security, and smart buildings. SolidSense N8 IoT Compact gateway SolidSense N8 IoT Compact specifications: SoC – NXP i.MX8M Nano single core Arm Cortex A53 @ 1500MHz + Cortex M7 @ 650MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash, MIcroSD card slot Connectivity Gigabit Ethernet RJ45 port with optional PoE support 802.11 a/b/g/n/ac WiFi 5 and Bluetooth 5.0 Optional 4G LTE Cat 4 (Global) + GPS with fallback […]

September 24, 2021August 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

NVIDIA Jetson Nano/Xavier NX carrier board offers 5 SATA, 6 CSI camera, dual GbE, and more

Leetop A205 Jetson Nano/Xavier NX carrier board

Leetop has introduced two carrier boards for NVIDIA Jetson Nano or Xavier NX modules, with Leetop A205 a full-featured carrier board offering five SATA ports, six MIPI CSI camera interfaces, an M.2 Key E slot, dual Gigabit Ethernet, four USB 3.0 ports, dual HDMI output and more, as well as the more compact Leetop A203 about the size of the modules themselves and offering Gigabit Ethernet, HDMI output, USB 3.0/2.0 ports, a camera interface, and an M.2 slot for optional WiFi and Bluetooth connectivity. We’ll focus on the former in this article, as it offers more features, and the smaller board provides less functionality than the NVIDIA Jetson Nano developer kit at a much higher price, although I understand it can still be useful for space-constrained applications. Leetop A205 specifications: Supported SoMs – NVIDIA Jetson Nano and Jetson Xavier NX Module Compatibility Storage – 5x SATA ports, MicroSD card slot […]

September 23, 2021March 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Zidoo M6 Arm mini PC review – Part 1: Unboxing and Teardown

I’ve just received my first Rockchip RK3566 platform with Zidoo M6 Arm mini PC that supports Ubuntu 18.04, Android 11, and Station OS. I was sent the standard version with 4GB RAM and 32GB eMMC flash that will be suitable for most applications. I’ll start Zidoo M6 review with an unboxing and a teardown to check the hardware design and “hidden” features before reviewing with the device with Android 11 and/or Ubuntu 18.04. Zidoo M6 Unboxing There’s nothing special about the package (and that’s a good thing in order to go more easily through customs), so let’s check out the package content. Beside the box, it’s there’s an HDMI cable, a 5V/2A power adapter with a removable US plug, an IR remote control, and a user manual. The remote control comes with an IR learning function to record some of your TV keys like volume, power, and source selection without […]

September 23, 2021September 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Kano PC 11.6-inch Windows 10 Laptop for kids sold for $99.99 (Promo)

Kano PC is a laptop designed for kids with an 11.6-inch touchscreen display, a Celeron N4000 dual-core Gemini Lake processor coupled with 4GB RAM, and 64GB eMMC flash, and running Windows 10. Nothing really special here, except for the price. Kano PC would normally sell for $299.99, but BestBuy offers it for just $99.99, which makes it an incredible deal, at least if you are based in the US, or you purchase through a forwarder. Let’s see what you could get for just under $100 with Kano PC specifications: SoC – Intel Celeron N4000 dual-core Gemini Lake processor @ 1.10 GHz with Intel UHD graphics; 6W TDP System Memory – 4GB DDR3L RAM Storage – 64GB eMMC flash, MicroSD slot Display – 11.6″ touchscreen display with 1366 x 768 resolution Audio – 3.5mm headphone jack, 3.5mm speaker level jack, 1x microphone Video – 1x HDMI port Connectivity – Dual-band Wi-Fi […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications