CNX Software - Embedded Systems News

October 4, 2021October 15, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Build a LoRaWAN weighing scale with TTGO T-Weigh ESP32 board, HX711 modules

Ever wanted to build your own LoRaWAN connected weighing scale? Me neither, but apparently those types of products already exist for logistics and inventory management, and LilyGO’s latest ESP32 board – the TTGO T-Weigh – is designed for this exact purpose with a Semtech SX1272 based LoRa module, and four HX711 24-bit ADC chips. The board can handle up to four scales that transfer weight data over WiFi, Bluetooth or LoRaWAN, and should be useful in applications that require weighting goods or products where there are limited connectivity options including logistics, farming. TTGO T-Weigh specifications: Wireless modules TTGO T-Micro32 module based on ESP32-PICO-D4 SiP with ESP32 dual-core processor, 4MB SPI flash, 2.4 GHz WiFi 4 and Bluetooth 4.2/5.x TTGO LORA32 module based on Semtech SX1262 transceiver (EU868/US915)with -22 dBm Tx power, -148 dBm sensitivity, up to 62.5 kbps LoRa bitrate, up to 300 kbps FSK bitrate Antennas WiFi/Bluetooth – Ceramic […]

October 4, 2021October 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Sofabaton X1 – IR, WiFi & Bluetooth remote control supports over 500k devices (Crowdfunding)

The Sofabaton X1 remote control system aims to replace all your other remote controls in your house thanks to infrared, WiFi and Bluetooth connectivity implemented through the X1 Hub, plus an integrated 2-inch on the remote itself for configuration and device selection. The company claims that over 500,000 devices are supported including TVs, DVD & Blu-Ray players, set-top boxes, gaming consoles, etc…, and voice commands are also supported through Google Home and Amazon Alexa voice services. SofabatonX1 specifications: X1 Hub Connectivity 2.4 GHz 802.11b/g/n Wi-Fi 4 Bluetooth 5.0 LE & Bluetooth 3.0 Infrared – 10 kHz to 100 kHz Power Supply – 5V/2A via USB Type-C port Material – PMMA X1 Remote Connectivity – Not mentioned… Display – 2-inch display with clickable scroll wheel User input – D-Pad, Backlit volume, trick modes, 4x customizable buttons, etc… Battery – 1,050 mAh LiPo battery good for about 2 months on a charge […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

October 3, 2021October 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

MochaBin-5G SBC offers 10GbE, WiFi 6, 5G for $159 and up (Crowdfunding)

Globalscale Technologies has a follow-up to their low-cost ESPRESSOBin SBC based on Marvell Armada 3700LP SoC. The MochaBin-5G SBC is powered by a Marvell Armada 7040 quad-core Cortex-A72 processor, and offers 10GbE networking for as little as $159, with as well as optional WiFi 6 and 5G connectivity. The single board computer is equipped with 16GB eMMC flash, up to 8GB DDR4, and plenty of high-speed interface with multiple Ethernet ports, USB 3.0 ports, M.2 socket for SATA and Cellular, and a mini PCIe for Wi-Fi and Bluetooth connectivity. MochaBin-5G specifications: SoC – Marvell Armada 7040 quad-core Corex-A72 processor @ up to 1.4GHz System Memory – 4GB or 8GB DDR4 (soldered down) Storage – 16GB eMMC flash, 4MB SPI NOR flash for bootloader, SATA connector, M.2 2280 socket for SATA III SSD Networking 1x 10GbE SFP+, 1x 1GbE SFP (via 88E1512 PHY) 4x Gigabit Ethernet RJ45 LAN ports via Topaz […]

October 2, 2021April 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Getting Started with the Yocto Linux BSP for Polarfire SoC FPGA Icicle Kit

Getting Started Guide PolarFire SoC FPGA Icicle Kit

Last month I received Microchip PolarFire SoC FPGA Icicle development kit that features PolarFire SoC FPGA with a Penta–core 64-bit RISC-V CPU subsystem and an FPGA with 254K LE, and booted it into the pre-installed Linux operating systems based on OpenEmbedded. Today, I’ll show how to get started with the Yocto BSP and run the EEMBC CoreMark benchmark, and I’ll check out the FPGA with Libero SoC Design Suite in a couple of weeks. Operating Systems supported by PolarFire SoC FPGA My initial idea was to focus this part of the review on Linux on RISC-V status, checking some system information, running some benchmarks (e.g. SBC-Bench), compiling the Linux kernel, and installing services like a LEMP stack (Linux, Nginx (pronounced Engine-X), MySQL, PHP) which could be used for WordPress hosting for instance. But then I looked at the operating systems supported with Microchip PolarFire SoC FPGA. There’s a Yocto Linux […]

October 1, 2021October 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Pocket P.C. devkits ship, U-blox GNSS module replaced by SIMCom SIM33ELA

The Pocket P.C. (aka Popcorn Computer) is a handheld Linux computer based on Allwinner A64 with 2GB RAM, 32GB storage, a 4.95-inch Full HD display, and a QWERTY keyboard that was introduced in 2019, and reminds me of PocketCHIP from a few years also with an Allwinner processor, a display, a keyboard, and a battery. The initial plan was to start shipping the device by May 2020, and there are been delays for reasons we’ll explain below, but the good news is that Source Parts has just announced the developer units had been shipped. So what happened exactly, besides the COVID-19 pandemic, government lockdowns, and supply chain disruptions? Source Parts first encountered issues with the quality of PCBs delivered by the manufacturer, which ended up with them having to switch to a new manufacturer. Getting the display to work was also a challenge, and Icenowy, a developer involved with linux-sunxi […]

September 30, 2021October 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Fairphone 4 repairable Android smartphone comes with a 5-year warranty

The Fairphone is a socially responsible repairable, modular Android smartphone that aims to last longer than most other phones. The latest iteration is the Fairphone 4, which follows the Fairphone 3 released in August 2019. The Fairphone 4 runs Android 11 on a Qualcomm Snapdragon 750G octa-core processor coupled with up to 8GB RAM, 256GB of storage, and a 6.3-inch Full HD+ display. The smartphone comes with a 5-year warranty by default, and software updates are guaranteed until at least 2025. Fairphone 4 specifications: SoC – Qualcomm Snapdragon 750G (SM7225) octa-core Kryo 570 processor with 2x Cortex-A77 cores @ 2.2GHz, 6x Cortex-A55 cores @ 1.8GHz, Adreno 619 GPU System Memory & Storage options 6GB RAM, 128GB internal storeage, MicroSD card socket up to 2TB 8GB RAM, 256GB internal storage, MicroSD card socket up to 2TB Display – 6.3-inch Full HD+ (2340×1080) IPS touchscreen display with Gorilla Glass 5 Cameras Primary […]

September 30, 2021September 30, 2021 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Open-source Allwinner V3 ISP driver to enable blob-free camera support in mainline Linux

Bootlin has just submitted the first patchset for the Allwinner V3 image signal processor (ISP) driver in mainline Linux which should pave the way for a completely open-source, blob-free camera support in Linux using V4L2. There are several blocks in an SoC for camera support including a camera input interface such as MIPI CSI 2 and an ISP to process the raw data into a usable image. Add to this the need to implement the code for sensors, and there’s quite a lot of work to get it all working. Allwinner SDK comes with several binary blobs, aka closed-source binary, but Bootlin is working on making those obsolete, having first worked on Allwinner A31, V3s/V3/S3, and A83T MIPI CSI-2 support for the camera interface driver in the V4L2 framework (and Rockchip PX30, RK1808, RK3128 and RK3288 processors), as well as implemented support for Omnivision OV8865 and OV5648 image sensors earlier […]

September 30, 2021September 30, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

M5Stack TOUGH – A weatherproof ESP32 Industrial IoT controller

M5Stack TOUGH weatherproof ESP32 display

M5Stack has launched several ESP32 WiFi & BLuetooth IoT controllers with an integrated display such as M5Stack Core2. The latest model, M5Stack TOUGH, is a little different as it is rugged and waterproof/weatherproof with a UV resistant enclosure sealed with o-ring, and offering waterproof M12 connectors. With protection against solid objects, dust, sand, dirt, and water drops, as well as variety of installation options such as screw mount, rolled strip, magnetic and adhesive back, the M5Stack TOUGH is suitable for more demanding environments from kitchens to factory floors, and outdoor data acquisition. M5Stack TOUGH specifications: SoC – Espressif ESP32-D0WDQ6-V3 dual-core processor @ 240 MHz with 520 KB, 2.4 GHz WiFi, and dual-mode Bluetooth Extra RAM – 8MB PSRAM Storage – 16MB Flash, MicroSD card slot up to 16GB Display – 2-inch color LCD with multi-touch capacitive screen, 320×240 resolution, 853nit brightness; ILI9342C display driver and CHSC6540 chip Audio – NS4168 […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications