CNX Software - Embedded Systems News

September 24, 2024September 27, 2024 by Sayantan Nandy - 8 Comments

ESP32-C6 WiFi 6 and Bluetooth 5.0 USB-C development board integrates 1.47-inch TFT LCD Display

Waveshare has introduced the ESP32-C6-LCD-1.47 development board powered by an ESP32-C6 RISC-V microcontroller with WiFi 6 and Bluetooth 5 connectivity and equipped with a 1.47-inch display with a 172×320 resolution. With a 4MB flash, an RGB LED, and a microSD card slot for extra storage, this board is suitable for projects that need a compact display, low power consumption, and wireless connectivity such as AIoT applications and human-machine interfaces (HMI). Earlier this month, we covered the ESP32-S3 USB dongle, another development board from Waveshare designed for HMI applications with the same 1.47-inch display with a 172×320 resolution, but a USB Type-A port instead of the USB-C port found in the model covered today. In the past, we’ve written about other ESP32-based development boards for HMI applications, including the LILYGO T-HMI, ESP32-S3-Touch-LCD-4.3B, and Waveshare’s ESP32-S3 LCD Driver Board supporting both square and round displays. Feel free to check them out if […]

September 23, 2024October 2, 2024 by Debashis Das - 1 Comment

MachineQ MQpower CT battery-less LoRa CT clamp measures up to 250A of current

MachineQ has recently introduced MQpower CT, a self-powered, IoT-enabled, LoRa CT clamp designed to monitor real-time current consumption. This CT clamp can measure both accumulated (Ah) and instantaneous current(A) with loads up to 100A and 250A with 1mA resolution. Additionally, it integrates a LoRa module for communication that gets powered by the induced current in the clamp itself. These features make this device useful for energy management, proactive maintenance, power monitoring, and more. We have covered various WI-Fi CT clamps in the past like the SONOFF POW Ring, the Emporia Vue Gen2 with 16 CT clamps, the ESP32-S2-based “smart power meter”, and more. Feel free to check those out if you are interested in Wi-Fi CT clamps. MQpower LoRa CT clamp specifications Connectivity – LoRaWAN Measurement range Up to 100A or 250A models 1mA resolution Accuracy ±1% (>5Arms) ±3% (≤5Arms) Misc Onboard reboot button and LED status indicator FUOTA (Firmware Update Over […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

September 23, 2024September 24, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

SONOFF ZBMINIR2 tiny Zigbee 3.0 switch also works as a Zigbee router with up to 64 sub-devices

SONOFF ZBMINIR2 is a tiny Zigbee smart switch that looks very similar to the SONOFF Zigbee Extreme (ZBMINIL2) but requires a neutral wire and can act as a Zigbee router with up to 64 sub-devices. It also supports new features such as “Turbo mode” for extended range and “detach relay” mode where the states of external switches and relay are separated, so operating the external switch button won’t affect the relay state. The tiny wireless switch can fit into the smallest EU-type/86-type/120-type mounting boxes and works with gateways supporting the Zigbee 3.0 protocol such as ZBBridge Pro, NSPanel Pro, and other compatible Zigbee 3.0 hubs. It also supports external switches (momentary, door, SPDT, and rocker), voice control through Amazon Alexa and Google Home, and like other SONOFF devices is designed to be controlled through the eWelink mobile app by default. SONOFF ZBMINIR2 specifications: MCU – Unspecified – Potentially the same […]

September 22, 2024September 23, 2024 by Debashis Das - 4 Comments

Waveshare 4-inch E-ink Spectra 6 full-color e-paper display is designed for the Raspberry Pi

Waveshare 4 inch, spectra 6 color e paper display

Waveshare recently launched the 4-inch e-Paper HAT+(E), a E-Ink Spectra 6 full-color e-paper module designed to work with the Raspberry Pi using the HAT+ standard. This 600×400 pixel display includes E-Ink Spectra 6 technology and doesn’t have a backlight. The Spectra 6 allows for high contrast and color saturation whereas no backlight means the display consumes very low power. The device communicates using SPI and is compatible with various controller boards like Raspberry Pi and Arduino. These features make this device useful for places like supermarkets, unmanned stores, shelf levels, hospital wards, and more. Waveshare has launched various e-paper displays in the past including the EINK-DISP-103 E-paper HDMI Display, the 4.2″ and 7.5″ Waveshare NFC-powered e-Paper display, and most interestingly the 7-Color e-Paper Display. Feel free to check those out if you are looking for high-quality displays. Waveshare 4-inch spectra 6 color e-paper display specification Display – E-Ink Spectra 6 […]

September 21, 2024December 2, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

M5Stack ESP32-S3-Pico-based devkits: ATOMS3R with 0.85-inch color display, and ATOMS3R Cam with VGA camera

M5Stack ATOMS3R and ATOMS3R Cam are two tiny devkits based on ESP32-S3-Pico system-in-package and a similar design but the first one features a 0.85-inch color color IPS display, while the other is equipped with a GC0308 VGA camera. Both modules measure just 24x24mm with a thickness of around 13mm, integrate BMM150 and BMI270 motion sensors, offer GPIO expansion through female headers and a grove connector, and feature an infrared transmitter and a USB Type-C port for power and programming. Those are the second devkits based on the ESP32-S3-Pico SiP after we covered the tiny OMGS3 module earlier this week. M5Stack ATOMS3R with display ATOMS3R specifications: SiP – Espressif ESP32-S3-PICO-1-N8R8 SoC ESP32-S3 dual-core Tensilica LX7 up to 240 MHz with 512KB SRAM, 16 KB RTC SRAM Wireless – WiFi 4 and Bluetooth 5 LE + Mesh Memory – 8MB QSPI PSRAM Storage – 8MB QSPI flash Display – 0.85-inch color IPS screen […]

September 21, 2024September 21, 2024 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

LiteWing DIY ESP32 drone costs about $12 to make

Circuit Digest’s LiteWing is a low-cost DIY drone controlled by an ESP32 module, based on a custom PCB and off-the-shelf parts that costs around 1000 Rupees to make, or $12 at today’s exchange rate. The DIY ESP32 drone was designed as a low-cost alternative to more expensive DIY drones that typically cost close to $70. The result is a WiFi drone that fits in the palm and controlled over WiFi using a smartphone. Interestingly it does not include any 3D printed parts as the PCB forms the chassis of the device. DIY ESP32 drone key features and components Wireless module – ESP32-WROOM-32 for WiFi control using a smartphone. Storage – MicroSD card slot Sensors – MPU6050 IMU for stability control. Propulsion 4x 720 coreless motors 2x 55mm propeller type A(CW) 2x 55mm propeller type B(CCW) USB – 1x USB-C port for charging and programming (via CP2102N) Power Management 1300mAh Li-Ion […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

September 20, 2024September 20, 2024 by Sayantan Nandy - No Comments

$15 Makerdiary iMX RT1011 Nano Kit runs Zephyr RTOS on 500 MHz NXP iMX RT1011 crossover MCU

Makerdiary’s iMX RT1011 Nano Kit is a prototyping board featuring the NXP iMX RT1011 Cortex-M7 Crossover MCU running Zephyr RTOS. It offers 128 KB of on-chip RAM, configurable as TCM or general-purpose memory, and supports high-speed USB, UART, SPI, I2C, SAI, PWM, GPIO, and ADC, making it suitable for a variety of embedded applications. The board also includes a 128 Mbit external QSPI flash with XIP support, flexible power management, a programmable LED and Button, and a USB-C connector. It features a dual-row 40-pin layout (DIP/SMT) with up to 33 multi-function GPIO pins, 15 of which can be used as ADC inputs, along with a Serial Wire Debug (SWD) port. Optional pre-soldered headers are available for added flexibility. We previously covered other iMX RT1011-based development boards, such as the Olimex RT1010-Py running MicroPython and Adafruit Metro M7 with CircuitPython firmware. Be sure to check them out if you’re interested. Makerdiary’s […]

September 20, 2024September 20, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ASUS Tinker Board 3 – A credit-card sized Rockchip RK3566 SBC with 12V to 19V DC input

ASUS Tinker Board 3 is a credit card-sized SBC based on Rockchip RK3566 SoC with an HDMI port, a 3.5mm audio jack, gigabit Ethernet, an M.2 socket for WiFi and Bluetooth, four USB ports, and a 40-pin GPIO header with a layout similar to the Raspberry Pi 3 Model B. When I first wrote about the Tinker Board 3 in 2023, it was a larger (100 x 100 mm) SBC based on Rockchip RK3568 SoC that was later renamed to Tinker Board 3N, now also available as a complete rugged system (more about that in a subsequent post). The new Tinker Board 3 (2024) is a completely different design that competes against Radxa ROCK 3C and Orange Pi 3B boards also based on RK3566 and offered in a business card/credit card form factor similar to the Raspberry Pi 3B. Tinker Board 3 specifications: SoC – Rockchip RK3566 CPU – Quad-core […]