CNX Software - Embedded Systems News

March 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SparkFun Raspberry Pi RP2040 & MicroMod boards take mikroBUS Click expansion boards

We’ve previously written articles about boards featuring the mikroBUS interface supporting thousands of Click expansion boards from Mikroelectronika, and now the company has collaborated with Sparkfun who launched MicroMod and Raspberry Pi RP2040-based boards with a mikroBUS socket, plus Qwicc connectors. Raspberry Pi RP2040 is the well-known dual-core Arm Cortex-M0+ microcontroller found in Raspberry Pi Pico and a range of third-party boards, while Sparkfun MicroMod‘s are M.2 MCU modules with chips from Microchip, Nordic Semi, Ambiq, Espressif Systems, and NXP. Sparkfun RP2040 mikroBUS development board specifications: MCU – Raspberry Pi RP2040 dual-core Cortex M0+ microcontroller up to 133 MHz with 264 KB SRAM Storage – 16MB QSPI flash, MicroSD card socket (on the bottom side) USB – USB Type-C port Expansion mikroBUS Socket 2x Qwiic connectors Thing Plus (or Feather) pin form factor with 18 GPIO pins including up to 4x 12-bit ADC, up to 8x 2-channel PWM, up to […]

March 9, 2022March 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Arduino Nicla Vision – A tiny STM32H7 board with 2MP camera, WiFi & Bluetooth LE, sensors

Arduino Nicla Vision is an ultra-compact (~2.3×2.3 cm) board powered by an STMicro STM32H7 dual-core Cortex-M7/M4 microcontroller, and equipped with a 2MP camera, a WiFi & Bluetooth LE module, and a few sensors. Those features make the board suitable for machine vision and edge computing applications such as asset tracking, image detection, object recognition, and predictive maintenance. For instance, image detection, facial recognition, automated optical inspection, vehicle plate reading, or gesture recognition can be added to projects, either using Nicla Vision as a standalone board or in combination with Portenta or MKR boards. Arduino Nicla Vision specifications: Microcontrollers – STMicro STM32H757AII6 dual-core MCU with Arm Cortex M7 @ 480MHz, Cortex-M4 @ 240MHz, 2 MB flash, 1MB RAM Storage – 16MB QSPI flash Connectivity – 2.4GHz WiFi 802.11b/g/n up to 65 Mbps and Bluetooth 5.1 BR/EDR/LE via Murata 1DX module Camera – 2MP GC2145 color camera. USB – Micro USB port […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

March 8, 2022March 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Renesas RZ/G2L or RZ/V2L AI development board comes with built-in LTE Cat M1 modem, 96boards form factor

Geniatech “AHAURA” RS-G2L100 / “AKITIO” RS-V2L100 is a Renesas RZ/G2L and RZ/V2L Cortex-A55/M33 development board that follows 96boards CE Extended v2.0 form factor, and is equipped with a Renesas LTE Cat M1 modem. Both RZ/G2L and RZ/V2L processors are basically the same, but the latter adds the “DRP-AI” (dynamically reconfigurable processor) AI accelerator for computer vision applications. The board also comes with up to 4GB RAM, two Gigabit Ethernet ports, a wireless WiFi and Bluetooth module, as well as Full HD HDMI video output, plus some USB ports, and the usual low-speed and high-speed expansion connectors from the 96Boards standard. Geniatech AHAURA RS-G2L100 and AKITIO RS-V2L100 specifications: SoC – Renesas RZ/G2L or RZ/V2L with dual-core Cortex-A55 processor @ 1.2 GHz, Arm Cortex-M33 core @ up to 200 MHz, Arm Mali-G31 GPU, and DRP-AI vision accelerator (RZ/V2L only) System Memory – 4GB (default) or 8GB LPDDR4 Storage – 8GB, 16GB, 64GB, […]

March 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

COVID-19 outbreaks and lockdowns in Shenzhen and Hong Kong delay some projects

This may read like January or February 2020 headlines with disruption to shipping and manufacturing in China due to a “new coronavirus”, but it’s happening again, particularly in Hong Kong and Shenzhen where COVID-19 case numbers have jumped and the governments have implemented strict measures to attempt to contain it. Since Shenzhen is a hub of electronics manufacturing and Hong Kong is often the gateway to those goods, we’ve received several reports of disruption and delayed projects. First, from Source Parts saying the Popcorn Computer will be further delayed in parts due to the COVID situation in Shenzhen: …Within a short period of time after cases suddenly began to rise, we noticed that more apartment complexes were undergoing mandatory lockdown. We started to stock up early on essentials including food and water. One day, the two nearby food markets we frequent were fully stocked in the morning and empty in […]

March 8, 2022March 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

ESP8285 WiFi DIP module replaces ATMega328P MCU on Arduino UNO board (Crowdfunding)

Released over 10 years ago, Arduino UNO is still the best-selling Arduino board, but lacking WiFi in the IoT era is not ideal, so Gianluca Martino, Arduino co-founder and working with the company until 2015, decided to design the Jolly DIP module based on ESP8285 WiFi chip that can replace the ATmega328P 8-bit AVR DIP-40 microcontroller. Since ESP8285 cannot provide all I/Os, notably analog inputs offered by ATmega328P, Gianluca combined it with the ATMega328PB microcontroller in a compact SMD package to offer firmware compatibility plus WiFi connectivity in the same DIP form factor. Jolly module specifications: MCU – Microchip ATMega328PB 8-bit AVR microcontroller with 32 KB ISP Flash, 1 KB EEPROM, 2 KB SRAM (Based on data from the datasheet) Wireless chip – Espressif Systems ESP8285H16 WiFi SoC with 2MB integrated flash plus ceramic antenna Communication interfaces between the two chips – SPI + UART (the latter exclusively for ESP8285 […]

March 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SECO PICTOR fanless embedded computer features RK3399-powered 3.5-inch SBC

SECO has recently introduced the PICTOR fanless embedded computer equipped with the company’s SOLON (previously called SBC-C31) 3.5-inch single board computer powered by a Rockchip RK3399 processor. The rugged computer ships with up to 4GB RAM, 64GB eMMC flash storage, offers dual Gigabit Ethernet, wireless connectivity, HDMI and DisplayPort (via USB-C) video outputs, USB 2.0/3.0 ports, as well as two RS-232 or RS-485 ports on DB9 connectors. SECO PICTOR specifications: SoC – Rockchip RK3399 hexa-core processor with two Cortex-A72 cores @ up to 1.8 GHz, four Cortex-A53 cores, an Arm Mali-T860MP4 GPU, and a VPU supporting H.265 10-bit, H.264 10-bit, VP9 8-bit 4Kp60 and MPEG-4/MPEG-2/VP8 1080p60 HW decoding, plus H.264, VP8 1080p30fps HW encoding System Memory – Up to 4GB 64-bit soldered down LPDDR4 memory Storage – Optional eMMC 5.1 flash, up to 64GB capacity Video Output HDMI 1.4 / 2.0a connector up to 4Kp60 DisplayPort interface on USB Type-C […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

March 7, 2022March 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Adafruit ESP32 Feather V2 ships with 8 MB Flash, 2 MB PSRAM, USB-C port, and more

Adafruit ESP32 Feather V2 (aka Huzzah32 Feather V2) is an upgrade to the company’s HUZZAH32 ESP32 Feather, still based on ESP32 WiFi & Bluetooth processor, and designed with the initial goal of replacing the obsolete CP2104 with the CP2012N USB to TLL chip. But Adafruit ended up doing a complete redesign with extra storage (8MB flash in total), 2MB PSRAM, a USB-C port replacing the Micro USB port, an extra tactile switch, an RGB LED, lower power consumption, and more. Adafruit ESP32 Feather V2 specifications: Wireless module – Espressif Systems ESP32-PICO-Mini-02 (PDF datasheet) with an ESP32 dual-core Xtensa processor @ up to 240MHz with 2.4 GHz WiFi and Bluetooth Classic/LE, 8MB flash, 2MB PSRAM, PCB antenna, FCC/CE certification. USB – USB Type-C port for power and programming via CP2102N chipset I/Os 16-pin and 12-pin GPIO headers with GPIOs, analog inputs, I2C, UART, SPI, DAC, etc… STEMMA QT connector for I2C devices, […]

March 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Eufy Security Video Smart Lock is a 3-in-1 doorbell, security camera, and door lock (Crowdfunding)

Smart Home security may involve a door lock, a doorbell, and a security camera, but instead of providing three different devices, Eufy Security Video Smart Lock combines all three features into a single device that can be installed on your front door. The device’s smart lock can be opened via a fingerprint scanner, an Android app, or voice commands through Alexa or Google Assistant, while you can watch the feed from the integrated 2K camera through the app whenever motion detection, combined with human detection, detects visitors. Eufy Security Video Smart Lock key features: 2K video camera with 160° field-of-view, 4:3 aspect ratio, 4 LEDs for night vision Video storage – Stored locally with SD card in the Chime (Gray box in the photo below), optional cloud storage coming Fingerprint sensor with 0.3s unlock, self-learning algorithm PIR and Radar motion detection, human detection, Range: 6 meters Auto-lock after up to […]