Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on POP32 & POP64 SIPs combine Allwinner A33 and A133 with SDRAM into a single package

POP32 & POP64 SIPs combine Allwinner A33 and A133 with SDRAM into a single package

POP32 POP64 Allwinner SIPs

Kettlepop is a board based on Allwinner GR8 system-in-package (SiP) with an Allwinner R8/A13 Arm Cortex-A8 CPU and 256MB RAM, and itself a derivative of the CHIP Pro board from Next Thing Co that closed doors a few years ago. Source Parts has just posted an update explaining that the GR8 SiP is not available anymore, so they worked on their own SiPs: POP32 and POP64. POP32 combines an Allwinner A33 quad-core Cortex-A7 processor with 128MB DDR4, while POP64 features an Allwinner A133 quad-core Cortex-A53 processor with 1GB LPDDR4. POP32 system-in-package POP32 highlights: SoC – Allwinner A33 quad-core Arm Cortex-A7 processor with Arm Mali-400 MP2, 1080p60 H.264, VP8, MPEG 1/2/4, JPEG/MJPEG video decoding, 1080p60 H.264 video encoding Memory – Built-in 128MB DDR3 Peripherals from SoC Storage I/F – NAND flash, 3x SD/MMC Display – MIPI DSI, LVDS, RGB LCD up to 1280×800 resolution Camera I/F – Parallel camera interface up […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Raspberry Pad 5 Raspberry Pi CM4 carrier board integrates 5-inch display for 3D printers

Raspberry Pad 5 Raspberry Pi CM4 carrier board integrates 5-inch display for 3D printers

Raspberry Pad 5

BIGTREETECH Raspberry Pad 5 is a carrier board for the Raspberry Pi CM4 module with a 5-inch 800×480 display and mainly designed as a control panel for 3D printers, but also usable for other HMI applications. The carrier board also exposes a 40-pin GPIO header, and offers Gigabit Ethernet, HDMI video output, a MIPI CSI port for a camera monitoring the prints, a USB Type-C port, as well as three USB 2.0 ports for further peripherals expansion. Raspberry Pad 5 specifications: Compatible with Raspberry Pi CM4 and CM4 Lite modules Storage – MicroSD card slot (for Raspberry Pi CM4 Lite) Display – 5-inch IPS display with a 5-point capacitive touchscreen, 800×480 resolution Video Output – HDMI port Camera -1x MIPI CSI interface for compatible cameras from Raspberry Pi, Arducam, etc… Networking – Gigabit Ethernet RJ45 port, optional WiFi 5 and Bluetooth 5.0 (on RPI CM4) USB – 3x USB 2.0 […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on BGA socket allows RAM upgrades on SBCs

BGA socket allows RAM upgrades on SBCs

BGA RAM socket / Interposer

In most cases, both the eMMC flash and RAM are soldered on single board computers, but we’ve previously boards with eMMC flash modules that allows to optionally add storage of various capacity and speed. But today I learned something similar exists for RAM chips with a socket that allows you to clip a BGA chip to change RAM capacity. The BGA socket is simply soldered on the board instead of the RAM chip itself, and as demonstrated on the MangoPi MQ Pro board, you could then insert the chip on the board instead of soldering it. Those are the specifications of the “DDR3x16-96” socket used above: Materials Socket base: LCP (liquid crystal polymers) Contacts: BeCu (Beryllium Copper), selective Au-Au flash over Ni plating Insulation resistance – 1000 MOhm or more at DC 100V Dielectric withstanding voltage – 100V AC for one minute Contact resistance – 50 mOhm max, at 10mA […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Cooler Master Pi Case 40 V2 launched together with 3D printable assets

Cooler Master Pi Case 40 V2 launched together with 3D printable assets

Cooler Master Pi Case 40 V2 Raspberry Pi 4

Cooler Master Pi Case 40 V2 case for Raspberry Pi 4 is the successor of the fanless Pi Case 40 metal enclosure launched in 2020 on Kickstarter. The company also offers 3D files for the case and accessories to expand its functionality. Cooler master Pi Case 40 V2 (MCM-PI400-MNNN-S01) specifications: Designed for Raspberry Pi 4 Model B Access to internal Raspberry Pi interfaces – 40-pin GPIO header, SD card, display, and camera I/F Misc – Remappable power button Dimensions – 96 x 68.2 x 27.3mm (excl. protrusions) or 28.58mm (incl. protrusions) Color(s) – Gun Metal Grey, Black Materials – Aluminum, Plastic, TPU The fanless enclosure ships with four modular mounting brackets, one Allen Key, two Thermal Pads, a 90° GPIO adapter, an ON/OFF switch, and a 40-pin jumper cable. It will not work with most/any other board compatible with Raspberry Pi 4 due to the different positions of the CPU. […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on NVIDIA NVDLA AI accelerator driver submitted to mainline Linux

NVIDIA NVDLA AI accelerator driver submitted to mainline Linux

NVDLA

A large patchset has been submitted to mainline Linux for NVIDIA NVDLA AI accelerator Direct Rendering Manager (DRM) driver, accompanied by an open-source user mode driver. The NVDLA (NVIDIA Deep Learning Accelerator) can be found in recent Jetson modules such as Jetson AGX Xavier and Jetson AGX Orin, and since NVDLA was made open-source hardware in 2017, it can also be integrated into third-party SoCs such as StarFive JH7100 Vision SoC and Allwinner V831 processor. I actually assumed everything was open-source already since we were told that NVDLA was a “complete solution with Verilog and C-model for the chip, Linux drivers, test suites, kernel- and user-mode software, and software development tools all available on Github’s NVDLA account.” and the inference compiler was open-sourced in September 2019. But apparently not, as developer Cai Huoqing submitted a patchset with 23 files changed, 13243 insertions, and the following short description: The NVIDIA Deep […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Volla Phone 22 runs Ubuntu Touch or a Google-free Android OS (Crowdfunding)

Volla Phone 22 runs Ubuntu Touch or a Google-free Android OS (Crowdfunding)

Volla Phone 22 Ubuntu Touch

Volla Phone 22 is a 6.3-inch smartphone powered by a MediaTek Helio G85 processor that focuses on privacy and runs either Ubuntu Touch from UBPorts, Volla OS Android fork without Google Play services or apps (YouTube,  Gmail, etc…), or others operating through a multi-boot. Hardware-wise, the Volla Phone 22 is a mid-range smartphone with 4GB RAM, 128GB storage, and it also comes with features not found on most recent smartphones including a user-replaceable battery, a 3.5mm audio jack, and a microSD card socket. Volla Phone 22 specifications: SoC – Mediatek Helio G85 octa-core processor with Arm Cortex-A75 cores @ up to 2.0 GHz, Cortex-A55 cores @ up to 1.8 GHz, Arm Mali-G52 MC2 GPU up to 1.0 GHz System Memory – 4GB RAM Storage – 128GB eMMC flash, microSD card socket Display – 6.3-inch Full HD display with 410 ppi pixel density. Audio – 3.5mm jack, built-in microphone and speaker […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 18 Comments on WCH CH343 USB to serial chips support 1.8V to 5V IO voltage, 6 Mbps baud rate, custom VID/PID

WCH CH343 USB to serial chips support 1.8V to 5V IO voltage, 6 Mbps baud rate, custom VID/PID

CH340 vs CH343

WCH CH340  family of USB to serial chip is very popular, and often found on development boards for debugging/access to the serial console, but the company has now introduced the CH343 “Gen3” chip – just like CH9102F apparently – with a higher 6 Mbps baud rate, support for 1.8V, 2.5V, 3.3V, and 5V IO voltage, and the ability to request custom USB VID/PID numbers. Three variants exist with CH343P, CH343G, and CH343K with different packages: QFN16, SOP16, and ESSOP10 respectively. CH343P contains an EEPROM for easy customization, while CH343G and CH343K PID/VID can still be customized for larger orders. CH343 key features and specifications: Full-speed USB 2.0 device interface Hardware full-duplex serial UART interface with baud rate varies from 50bps to 6Mbps. Automatic identification and dynamic adaptation of common communication baud rate of 115200bps and below. Supports 5, 6, 7, or 8 data bits, as well as odd, even, space, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 51 Comments on ROC-RK3588S-PC is the first Rockchip RK3588S SBC, supports up to 32GB RAM

ROC-RK3588S-PC is the first Rockchip RK3588S SBC, supports up to 32GB RAM

ROC-RK3588S-PC

Rockchip RK3588S processor, a cost-down version of Rockchip RK3588 SoC with fewer interfaces, has made its way into Firefly ROC-RK3588S-PC SBC (single board computer) about the size of a credit card and equipped with up to 32GB RAM. The compact SBC also comes with up to 128GB eMMC flash, and offers support for NVMe storage, up to four video outputs through HDMI, USB-C and MIPI DSI interfaces, Gigabit Ethernet, USB 3.0, two MIPI CSI camera interfaces, and more. Firefly ROC-RK3588S-PC specifications: SoC – Rockchip RK3588S octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores, Arm Mali-G610 MP4 quad-core GPU with OpenGL ES3.2 / OpenCL 2.2 / Vulkan1.1 support, 6 TOPS NPU, and an 8Kp60 H.265/VP9/AVS2 video decoder, 4Kp60 decoder, 8Kp30 H.265/H.264 video encoder System Memory – 4GB, 8GB, 16GB or 32GB LPDDR4/LPDDR4x/LPDDR5 Storage 16GB, 32GB, 64GB, or 128GB eMMC flash M.2 (PCIe 2.0) socket for […]

Boardcon EM3562 Rockchip RK3562 SBC with 8 analog camera inputs