CNX Software - Embedded Systems News

May 5, 2022May 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

ROCK Pi 4 Model C+ SBC features 1.5 GHz Rockchip RK3399-T CPU, dual HDMI output

ROCK Pi 4 Model C+ is a single board computer (SBC) by a Rockchip RK3399-T hexa-core processor @ 1.5 GHz, equipped with 4GB RAM, and two micro HDMI ports to drive up to one 4K display, and one 2K display. It is yet another ROCK Pi 4 SBC from Radxa, and the first to use the down-clocked RK3399-T processor with other models based on Rockchip OP1 processor clocked at 2.0GHz (overclockable to 2.2/2.4GHz) or the traditional Rockchip RK3399 @ 1.8 GHz (overclockable to 2.0 GHz), and also the first of the family to offer dual HDMI output. ROCK Pi 4 Model C+ specifications: SoC – Rockchip RK3399-T big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.5 GHz (up to 2.0 GHz overclock) 4x Cortex-A53 @ up to 1.4 GHz (up to 1.6 GHz overclock). Note the processor datasheet says the Cortex-A53 cores are limited to 1.0 GHz, but […]

May 5, 2022February 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Badger 2040 is a programmable E-Ink display powered by Raspberry Pi RP2040

Pimoroni Badger 2040 is a Raspberry Pi RP2040 board equipped with a 2.9-inch black and white E-Ink display with 296 x 128 resolution and programmable with C/C++, MicroPython, or CircuitPython. The board is not just an ePaper badge, as it also comes with five buttons, and expansion capability through a Qwiic/STEMMA QT connector plus some pads with UART, I2C, interrupt, and power signals. Badger RP2040 specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM Storage – 2MB QSPI flash Display – 2.9-inch B&W E Ink display with 296 x 128 pixels resolution, ultrawide viewing angles, ultra-low power consumption; Dot pitch – 0.227 x 0.226 mm USB – 1x USB Type-C port for power and programming Expansion Qwiic/STEMMA QT connector 10 pads with I2C, an interrupt pin, UART, SWC/SWD, 3.3V, GND Misc 5x front user buttons Reset and boot buttons (the […]

May 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm Wi-Fi 7 Networking Pro Series SoCs support up to 33 Gbps PHY rate, up to 2,000 clients

Qualcomm has announced the Wi-Fi 7 capable Qualcomm Networking Pro Series Gen 3 family designed for routers and access points with a PHY rate up to 33 Gbps with the quad-band 16-stream Networking Pro 1620 platform and offers some competition to the recently announced Broadcom WiFi 7 access point chips. The company will also offer the tri-band 12-stream Networking Pro 1220 with up to 21.6 Gbps aggregated link rate, the quad-band 8-stream Networking Pro 820 capable of 16.5 Gbps PHY rate, and at the low-end of the scale, the Networking Pro 620 limited to 10.8 Gbps with three bands and six streams. Qualcomm Networking Pro 1620 (IPQ9574) platform specifications: CPU – Quad-core Arm Cortex-A73 @ 2.2 GHz System Memory – DDR3L, DDR4 16/32-bit Storage – eMMC, NAND, Serial NOR, SD/eMMC Networking Wired – 6 Port Integrated Ethernet Switch 4 x 2.5 GbE + 5 GbE + 10 GbE Wireless Wi-Fi […]

May 4, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

NXP i.MX RT1180 Cortex-M7/M33 crossover MCU integrates GbE TSN for industrial IoT communication

NXP i.MX RT1180 is the latest member of the company’s i.MX RT Series crossover MCUss with application processor-like performance. The 800 MHz dual-core Arm Cortex-M7/M33 microcontroller is specifically designed for industrial IoT communication with a Gigabit Ethernet port supporting time-sensitive networking (TSN). NXP also highlights that it is the first crossover MCU to include an EdgeLock secure enclave that “eases the complexity of implementing robust, system-wide security intelligence for industrial IoT applications”, and the new processor aims to bridge the gap between existing industrial systems and Industry 4.0 system. NXP i.MX RT1180 key features and specifications: CPUs – Arm Cortex-M7 @ 800 MHz + Arm Cortex-M33 @ 240 MHz (Optional: single-core Arm Cortex-M33) On-chip Memory – Up to 1.5 MB SRAM (ECC protected) with 512 KB of TCM for Cortex-M7 and 256 KB of TCM for Cortex-M33 Memory & Storage I/F – 2x FlexSPI for HyperRAM or HyperFlash 8/16/32-bit SDRAM/LPSDRAM […]

May 4, 2022May 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

xSPI MRAM provides an alternative to SPI NOR/NAND flash with up to 400MB/s R/W bandwidth

Everspin has unveiled the EMxxLX xSPI MRAM (Magnetoresistive Random Access Memory) non-volatile memory solution for industrial IoT and embedded systems providing an alternative to SPI NOR/NAND flash with much faster R/W data rates of up to 400MB/s and densities between 8Mbit and 64Mbit. The higher speed is made possible by the new JEDEC expanded Serial Peripheral Interface (xSPI) standard interface and a clock frequency of up to 200 MHz, the maximum supported by the xSPI standard. All chips operate at 1.8V, and the family is offered in 24-ball BGA and 8-pin DFN packages. EMxxLX xSPI MRAM key features and specifications: Density – 8Mb, 16Mb, 32Mb, 64Mb 400MBps sustained throughput with OSPI at 200MHz, DTR, for reads and writes Expanded SPI (xSPI) bus interface supporting Octal, Quad, Dual, and Single SPI protocol Up to 200MHz single and double transfer rate (STR/DTR) for Octal SPI Up to 133MHz, SPI, DSPI, QSPI Data […]

May 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Samsung UFS 4.0 storage to offer up to 4,200 MB/s read speeds, 1TB capacity

Samsung Electronics has unveiled its first Universal Flash Storage (UFS) 4.0 solution based on the company’s 7th-generation V-NAND and a proprietary controller allowing speeds of up to 23.2 gigabits per second (Gbps) per lane or double the previous UFS 3.1 solutions. In more practical terms, Samsung UFS 4.0 storage will deliver a sequential read speed of up to 4,200 MB/s and a sequential write speed of 2,800 MB/s, corresponding to about 2x and 1.6x faster speeds over UFS 3.1 storage. Samsung also claims that power efficiency has been enhanced with a sequential read speed of up to 6.0 MB/s per milliampere (mA), or about a 46-percent improvement over UFS 3.1. An advanced Replay Protected Memory Block (RPMB) is integrated into the chip to store important personal data that can only be read or written through authenticated access, and whose design is said to be 1.8 times more efficient. Samsung UFS […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

May 3, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek AIE900-XNX – A 5G connected fanless Edge AI system for AMR, AGV, and computer vision

Axiomtek AIE900-XNX is a fanless Edge AI computing system powered by NVIDIA Jetson Xavier NX system-on-module designed for autonomous mobile robots (AMR), automated guided vehicles (AGV), and other computer vision applications. The system delivers up to 21 TOPS thanks to the 6-core NVIDIA Carmel ARM v8.2 (64-bit) processor, NVDLA accelerators, and 384-core NVIDIA Volta architecture GPU found in the Jetson Xavier NX module. The AIE900-XNX Edge AI computer also comes with a 5G module for high-speed cellular connectivity and supports SerDes, PoE, and MIPI CSI cameras for video processing. Axiomtek AIE900-XNX specifications: NVIDIA Jetson Xavier NX system-on-module with CPU – 6-core NVIDIA Carmel Armv8.2 64-bit CPU with 6 MB L2 + 4 MB L3 cache GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI Accelerator – 2x NVDLA System Memory – 8GB 128-bit LPDDR4x onboard Storage – 16GB eMMC flash Storage – M.2 Key M 2280 with PCIe […]

May 3, 2022May 4, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

NVISEN FU01 is a fanless Tiger Lake mini PC with a Thunderbolt 4 port

NVISEN FU01 fanless mini PC is offered with a choice of Intel Core i3/i5/i7 Tiger Lake processors, fitted with up to 16GB RAM (upgradeable to 64GB), a 256GB or 512GB M.2 NVMe SSD, and the highlight of the computer is its 40Gbps Thunderbolt 4 port with 8K video output support. The Tiger Lake system can drive up to three 4K displays with HDMI 2.0 and DisplayPort connectors adding to the Thunderbolt 4 port, offers Gigabit Ethernet and WiFi 5 connectivity, plus six USB 3.0/2.0 Type-A ports for expansion. NVISEN FU01 specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core processor @ 3.0GHz, up to 4.1GHz (Turbo) with Intel UHD graphics; 28W TDP Intel Core i5-1135G7 quad-core processor @ 2.4GHz, up to 4.2GHz (Turbo) with Intel Xe graphics; 28W TDP Intel Core i7-1165G7 quad-core processor @ 2.8GHz, up to 4.7GHz (Turbo) with Intel Xe graphics; 28W TDP System Memory & […]

Boardcon Rockchip and Allwinner SoM and SBC products