Posted on

Review of TwoTrees TTC 450 CNC router machine with 80W and 500W spindles

TwoTrees TTC 450 is a CNC router machine for precision cutting with a working area of 460x460x80 mm. The machine can handle 2D and 3D, 3-axis X, Y, Z movement, features a 32-bit microcontroller,  a touchscreen control display, and supports WiFi network connection. The TTC 450 can also read files on an SD card for offline operation, and workpieces can be made of a variety of materials such as wood, acrylic, Plastwood, carbon fiber sheet, aluminum, metal, and various engineering plastic materials. TTC 450 CNC router specifications Work Area – 450 x 450 X 80 mm Body Material – Metal frame & Aluminium 4080U Profile Drive System – Translation screw drive with double Y-axis system Mainboard – DLC32 V2.1 (ESP32-based as found in TwoTrees TS2 laser engraver) Stepper Driver – A4988 1.3A Stepper Motors – 17HS8401S, NEMA23 20mN.m Spindle – 74W, 8000RPM Max Speed – 800mm/Min Running Accuracy – +/-0.1mm […]

Posted on

NanoPi R6S RK3588S mini PC & router review – Part 2: Ubuntu 22.04

NanoPi R6S is both a mini PC and a router based on Rockchip RK3588S processor. I received some samples in November and started the NanoPi R6S review with OpenWrt/FriendlyWrt quickly testing the 2.5GbE interfaces and routing with iperf3, and it worked pretty well. But using a system with an octa-core Cortex-A76/A55 processor and 8GB RAM as an OpenWrt router only feels like a waste of resources, so I wanted to install a more versatile operating system – Ubuntu 22.04 – for further testing. My struggles installing Ubuntu 22.04 on NanoPi R6S FriendlyELEC provides various images on the Wiki either booting from an SD card, installing from a MicroSD to the eMMC flash (aka eFlasher imagers), or flashing through USB with Windows tools. I like the eFlasher images since the OS runs from the internal eMMC flash and no special tools are needed. I had just used the FriendlyWrt eFlasher image, […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on

ultraArm P340 Arduino-based robotic arm draws, engraves, and grabs

Elephant Robotics ultraArm P340 is a robot arm with an Arduino-compatible ATMega2560 control board with a 340mm working radius whose arm can be attached with different accessories for drawing, laser engraving, and grabbing objects. We’ve previously written and reviewed the myCobot 280 Pi robotic arm with a built-in Raspberry Pi 4 SBC, but the lower-cost ultraArm P340 works a little differently since it only contains the electronics for controlling the servos and attachments, and needs to be connected to a host computer running Windows or a Raspberry Pi over USB. ultraArm P340 specifications: Control board based on Microchip ATMega2560 8-bit AVR microcontroller @ 16MHz with 256KB flash, 4Kb EEPROM, 8KB SRAM DOF – 3 to 4 axis depending on accessories Working radius – 340mm Positioning Accuracy – ±0.1 mm Payload – Up to 650 grams High-performance stepper motor Maximum speed – 100mm/s Communication interfaces – RS485 and USB serial Attachment […]

Posted on

Review of Creality Ender-3 S1 Pro 2-in-1 3D printer & laser engraver – Part 1: Unboxing and assembly

Creality Ender-3 S1 Pro is a 3D printer that can be converted into a laser engraver thanks to a choice of 1.6W, 5W, and 10W laser modules, making it in theory a space-saving machine that can print 3D objects and engrave & cut materials. The company sent me a full kit with a 10W laser module, so after looking at the 3D printer’s specifications, I’ll check the various packages, and report my experience assembling the 3D printer, and then converting it into a laser engraver in this article, before actually testing both functions in the second part of the review. Since Karl reviewed the Ender-3 Pro 3D printer over two years ago, I asked about the difference and was told the new model got various improvements such as a direct extruder, CR-Touch auto bed-leveling, and support for high-temperature printing. Creality Ender-3 S1 Pro specifications Technology – FDM Maximum printing volume […]

Posted on

Making a DIY 10.1-inch All-in-One PC out of AMR5 Ryzen 5 gaming mini PC

Hey Karl here. The first thing I need to do is thank the manufacturer of the brand Ace Magician for sending over a unit of their AMR5 gaming mini PC to more or less play with. I did a tiny bit of benchmarking along the way. This is the last time you will see the system in this state 😀 Story time. I have been really wanting a Steam Deck. But we purchased a Nintendo Switch about a year ago and it has barely been used. As soon as my son picked it up he asked why it was so laggy and has shown very little interest in it. So that got me worried about purchasing essentially a one-trick device. There have been a couple of good attempts at a DIY Steam Deck and I wanted to experiment with a small form factor. I went into this with a general […]

Posted on

Longer LK5 Pro 3D printer review & speed printing

Hey, Karl here with a 3D printer review. We are going to be looking at the Longer LK5 Pro. I have known of the brand Longer for a little while, and when I think of Longer I associate the brand to resin 3D printers but today we are looking at one of their FDM offerings. Spoiler alert. The LK5 Pro is exceptionally ordinary. In late 2021 the state of hobby 3D printing seems to have plateaued. Most of the requirements that I want in a single machine are being met. The LK5 meets these basics. Easy build Silent drivers Nice print surface Touchscreen Out of box calibration Adequate motion system Rigid Frame Good Print quality With that said, nearly all new printers I see now look and perform similarly. Today my only real desire is to print faster and think speed can be one of the shorter-term goals I can […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

M5Stack Atom DTU LoRaWAN Kit also supports WiFi, RS485, Modbus communication

M5Stack is known for its ESP32 based building blocks for the IoT with WiFi & Bluetooth wireless connectivity, I/O headers, and block-specific features like a tiny color display, a speaker, a touchscreen display, a camera, and more. The company’s latest product is the M5Stack Atom DTU LoRaWAN Kit based on ESP32 ATOM Lite, as well as ASR Micro ASR6501 LoRa module (SX1302 based) and one RS485 header that allows for industrial communication notably with the Modbus protocol. M5Stack Atom DTU LoRaWAN Kit specifications: Wireless connectivity  M5Stack ATOM Lite with ESP32 WiFi 4 and Bluetooth 4.2/5.x dual-core SoC ASR ASR6501 LoRa chip Operating frequency – 868MHz or 915 MHz Transmit power – Up to +21dBm RX sensitivity – Up to -137dBm (SF=12/BW=125KHz) Serial communication – UART 115200bps (AT command) via ESP32 Antenna – SMA antenna connector Power consumption @ 3.3V (from ASR6501 datasheet) Tx @ +21dBm – 106 mA Rx – […]

Posted on

Genmitsu 6060 XY-Axis Extension Kit for PROVerXL4030 – DIY desk and folding cart

Karl here. I teased this article in the final review of the Genmitsu PROVerXL 4030 CNC Router. I was really happy with the base kit. You can check out all my thoughts there. SainSmart recently released an extension kit that I have now had for a few weeks. It increases the stock size from 300 x 400 to 600 x 600. That is what we are here to check out today. When I inquired about the kit I didn’t realize how boring a review of the kit would be but I will do my best to bring some additional value beyond just unboxing and building experience. Unboxing The parts list is minimal 2x Y-axis Aluminum Extrusion (lead screw included) 2x X-axis Aluminum Extrusion (lead screw included) 2x Front/Back Plate 7x Drag Chain 9x Drag Chain 4x Hexagonal Wrench, 4mm, 3mm, 2.5mm, 1 mm The original kit came with some decent […]

Boardcon Rockchip and Allwinner SoM and SBC products