$369 CHUWI Hi13 2-in-1 Windows 10 Tablet is Equipped with a 3000×2000 Display, Supports Ubuntu / Linux

I’ve recently reviewed CHUWI LapBook 14.1 laptop powered by an Intel Apollo Lake Celeron N3450 quad core processor, and found it to be a perfectly usable entry-level laptop with a few caveats like potential issues with USB ports, and the lack of brightness keys. The company is now about to launch with a higher end model, with the same processor, but instead of a 14.1″ Full HD display it will come with a high resolution 3000×2000 touchscreen 13.5″ display. The tablet will sell with Windows 10, but the company also claims support for Ubuntu, and other Linux distributions will likely work too. CHUWI Hi13 specifications: SoC – Intel Celeron N3450 quad core “Apollo Lake” processor @ 1.1 GHz / 2.2 GHz (Burst frequency) and 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz (Burst freq.); 6W TDP System Memory – 4GB DDR3L memory Storage – 64 GB […]

Report: Linux Cannot Be Installed on Microsoft Signature Edition PCs, Laptops and Tablets

Microsoft Signature program is designed to make sure certified devices offer the best possible experience for users, as they can not come with bloatware, include Windows Defender, and must meet strict hardware requirements. However according to a Phoronix report, “providing the best possible user experience” also includes blocking installation of alternative operating systems such as Ubuntu, Debian, or other Linux distributions. The issue was discovered by rijesh who attempted to install Ubuntu 16.04 on his Microsoft Signature Edition Lenovo Yoga 900 13-ISK2 laptop, and noticed that while the BIOS and Windows 10 could see his 512 GB hard drive, Ubuntu was unable to find it, and a customer support representative answered that: This system has a Signature Edition of Windows 10 Home installed. It is locked per our agreement with Microsoft. Another user reports having successfully installed Ubuntu 16.04 on his Lenovo YOGA 900-13ISK, so the devil is in the […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

$35 expEYES Junior Transforms the Raspberry Pi, Aakash2 Tablet or any Linux Powered Device into an Electronics Lab

I remember in high school in France, our class only had 2 oscilloscopes and few other electronics equipment, needless to say I did not actually get to use an oscilloscope until I went to university. It would have been nice to be able to play around with oscilloscopes, frequency generators, etc… earlier, but due to budget constraints, this was not possible. Dr Ajith Kumar, a scientist working with the Inter University Accelerator Centre of India, has spent several years working on an ultra low cost electronics lab composed of an oscilloscope and a signal generator to provide students attending schools that cannot afford regular equipments. This learning & experimentation tool is called expEYES, and a prototype was demonstrated last year with the Raspberry Pi. At the end of last year, the final version called expEYES Junior (aka expEYES 2.0) was announced, and is now available to schools and hobbyists in […]

2D/3D Graphics Linux Demo (X11, EGL, GLES2, Qt4) on AllWinner A10 Tablet

Xlab (Maxim Kouprianov) has tested 2D & 3D capabilities of AllWinner A10 SoC (with Mali-400 GPU) on a Ployer MOMO11 Bird Edition tablet running OpenEmbedded with kernel 3.0.52+ testing X11, EGL, OpenGL ES2 and Qt4 on the platform, and the results are pretty smooth as you can see in the video below, although there appears to be some flickering in LunaSysMgr demo. The tools used in the demos are xfwm4 (Xfce Windows Manager), es2gears_x11, cube (Qt), LunaSysMgr (Qt/WebOS) and glmark2-es2. Qt4 acceleration is done via XlibGL platform which in turns uses X11-EGL. He used the Mali drivers version r3p0 (mali400-gles20-gles11-linux-x11-ump) and xf86-video-mali on sunxi-linux github repository mainly maintained by rz2k. You can get more details on how to build Mali-400 support for AllWinner A10 on http://linux-sunxi.org/Mali400, and GPU benchmark results for A10 show the drivers seem to work as expected.

GAOMON PD2200 pen display review – A 21.5-inch drawing tablet tested with Windows 11, Ubuntu 24.04, Krita software

Today, we’ll review the GAOMON PD2200 pen display, a 21.5-inch drawing tablet with 1920 x 1080 resolution, and an AP32 stylus with 8192 levels of pressure sensitivity. It allows you to draw and write in the same way as you would with a pen and paper. It can also be used as a standard HDMI monitor and is similar to the smaller, but higher resolution (2560 x 1440) HUION Kamvas Pro 16 (2.5K) we reviewed last April. HUION and GAOMON are different brands, but based on the shipping information, they may be made by the same company… Guangdong Gaomon Technology sent us a sample of the GAOMON PD2200 drawing tablet for review. We will test the device as an external display in Windows 11 and Ubuntu 22.04 and as a drawing tablet using the stylus with Krita open-source software that works fine in both Windows and Linux. GAOMON PD2200 Pen […]

DC-ROMA RISC-V Pad II octa-core RISC-V tablet can be pre-ordered for $149 and up

DeepComputing DC-ROMA RISC-V Pad II is a 10.1-inch tablet based on the same SpacemIT K1 octa-core 64-bit RISC-V processor found in the DC-ROMA RISC-V Laptop II introduced a few months ago, as well as in the MILK-V Jupiter mini-ITX motherboard. The RISC-V tablet features up to 16GB LPDDR4, 128GB eMMC flash, a 10.1-inch capacitive touchscreen display with 1920×1200 resolution, a 5MP rear camera, a 2MP webcam, a USB-C port for peripherals and/or an external display, and a 6,000 mAh battery. DC-ROMA RISC-V Pad II specifications: SoC – SpacemiT K1 CPU – 8-core X60 RISC-V processor @ up to 2.0 GHz GPU – Imagination IMG BXE-2-32 with support for OpenCL 3.0, OpenGL ES3.2, Vulkan 1.2 VPU – H.265, H.264, VP9, VP8 4K encoding/encoding NPU – 2.0 TOPS AI accelerator RVA 22 Profile RVV 1.0 compliant System Memory – 4GB, 8GB or 16GB LPDDR4 Storage 64GB or 128GB eMMC 5.1 flash MicroSD […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

Linux 6.10 Release – Notable changes, Arm, RISC-V, and MIPS architectures

Linux Torvalds has announced the release of Linux 6.10 on LKML: So the final week was perhaps not quote as quiet as the preceding ones, which I don’t love – but it also wasn’t noisy enough to warrant an extra rc. And much of the noise this last week was bcachefs again (with netfs a close second), so it was all pretty compartmentalized. In fact, about a third of the patch for the last week was filesystem-related (there were also some btrfs latency fixes and other noise), which is unusual, but none of it looks particularly scary. Another third was drivers, and the rest is “random”. Anyway, this obviously means that the merge window for 6.11 opens up tomorrow. Let’s see how that goes, with much of Europe probably making ready for summer vacation. And the shortlog below is – as always – just the last week, not some kind […]

Convert your tablet or smartphone into a touchscreen display for your PC, motherboard, etc… with the AURGA Viewer

The AURGA viewer is an HDMI and USB dongle with WiFi and Bluetooth connectivity that plugs into any system with HDMI output and can convert any smartphone, tablet, or laptop with a touchscreen display into a KVM solution by sending video data, as well as keyboard and mouse events wirelessly. We’ve recently written about Openterface Mini-KVM KVM-over-USB device that allows users to use their laptop to control another device with HDMI output locally without any additional display, keyboard, and mouse. But I’ve just been informed the AURGA Viewer, launched in 2022 on Kickstarter, can do something similar wirelessly. AURGA Viewer specifications and features: SoC – Allwinner S3 Cortex-A7 processor with 128MB DDR3 HDMI input – Male HDMI port with Toshiba TC35874x HDMI to MIPI CSI-2 bridge internally (See comments section); Works with VGA, mini HDMI, micro HDMI, etc… using adapters Wireless – Broadcom BCM4345C5 SDIO 802.11AC WiFi 5 and Bluetooth […]

Boardcon Rockchip and Allwinner SoM and SBC products