Posted on

Industrial 5G/4G Base Shield supports Raspberry Pi, Jetson Nano, other SBC’s (Crowdfunding)

Akari, a start-up based in Japan, has designed an industrial base shield for Raspberry Pi 4/3/Zero, Jetson Nano, Rock Pi 4, and other compatible single board computers. The board allows users to create industrial gateways integrating wireless modules (5G, 4G LTE, WiFi 6 and/or LoRa), a neural compute stick, relay module, and digital inputs, RS232/RS422/RS485, and more. Industrial 4G/5G Base Shield specifications: Compatible SBCs – Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi Zero, Jetson Nano, Rock Pi 4, UP Board, and probably other SBCs with a similar form factor I/Os Build-in relay module and digital input (also reserve dry contacts and wet contacts) Digital input / digital output RS232, RS485, RS422 Internal headers USB host port for connection with Raspberry Pi Expansion M.2 socket for 5G Mini PCIe socket for 4G LTE, WiFI6, or LoRa SIM card socket Internal bay for Intel Neural Compute Stick Misc – RTC module […]

Posted on

Raspberry Pi gets official IQAudio audio boards, improved industrial support

The Raspberry Pi was envisioned as an inexpensive, yet highly-features platform to teach programming to young kids, but as soon as the board was released in 2012 things quickly got out of control and many people started to use the low-cost SBC in various projects, or just as an XBMC (now Kodi) media center. Over 8 years later, that means 44 percent of Raspberry Pi boards were sold to the industrial/commercial market as opposed to individuals or the education market. Two recent announcements from the Raspberry Pi Foundation / Raspberry Pi Trading highlight the willingness of the organizations to expand the use of their boards to more markets: IQaudio audio boards and a new section of the website specific to industrial support. IQaudio audio boards for Raspberry Pi If you’ve already heard about IQaudio, that’s because the audio boards are not new. They were developed by a company called IQaudio […]

Khadas Edge2 Arm mini PC
Posted on

PixelBlaze v3 WiFi LED board supports live-coding via a web interface (Crowdfunding)

We’ve previously covered a couple of ESP8266 WiFi boards to control LED strips from ANAVI Technology ESP8266 powered ANAVI Miracle Controller and ANAVI Light Controller Starter Kit, but Ben Henke has also made similar ESP8266 LED controllers with PixelBlaze boards. The latest iteration – PixelBlaze v3 – is based on ESP32 WiSoC and comes in two variants: PixelBlaze v3 Standard with headers and PixelBlaze V3 Pico in a much tinier form factor (33.3 x 11mm) with both models supporting live-coding via a web interface. PixelBlaze v3 specifications: Wireless SiP or module Standard – ESP32-WROOM-32 module with Espressif ESP32 dual-core processor @ 240 MHz with 4MB flash Pico – ESP32-PICO-D4 system-in-package with Espressif ESP32 dual-core processor @ 240 MHz with 4MB flash 4-pin header with VCC, GND, DATA, CLK for LED matrix or strip Compatible with APA102, SK9822, DotStar, WS2811, WS2812 (up to 2,500 LEDs), WS2813, WS2815, NeoPixel, and WS2801 actively […]

Posted on

Giveaway Week – RockPi 4C SBC

The first, but not last, SBC of Giveaway Week 2020 is RockPi 4C single board computer equipped with a Rockchip RK3399 processor coupled with 4GB RAM, and featuring HDMI and DisplayPort for dual 4K monitor setups, as well as Gigabit Ethernet, WiFI 5, Bluetooth, USB 3.0/2.0 ports, etc… The board closely follows Raspberry Pi 4 form factor, so without thinking too much about it I thought I could just use it with CrowPi2 Raspberry Pi 4 laptop. However due to small mechanical differences, and a different position of the processor impacting cooling, I quickly realized this would not work. Since I did not have time to review yet another RK3399 SBC, I thought I might as well as give it away, as I’m sure somebody will find a good use for it. Note the board does not come with any accessories, so you’ll have to get a MicroSD card, USB-C […]

Posted on

Raspberry Pi 400 Keyboard PC Review and Benchmarks vs Raspberry Pi 4

Raspberry Pi 400 keyboard computer with Broadcom BCM2711C0 1.8 GHz processor has just launched, and we already published a teardown of the Raspberry Pi 400 hardware to check out the cooling solution and overall hardware design. In this review, we’ll mostly focus on Raspberry Pi 400 and Raspberry Pi 4 differences, since both devices mostly rely on the same chips. After checking the different features, we’ll run Thomas Kaiser’s “SBC Bench” script to test thermal cooling and benchmark both RPi hardware platforms. Raspberry Pi 400 vs Raspberry Pi 4 Model B Features Since under the hood, the two platforms are very similar, we’ll highlight the difference as shown in the table below courtesy of Cytron. Price is not shown in the table above, but Raspberry Pi 400 costs $70, while Raspberry Pi 4 with 4GB goes for $55. That’s $15 extra for a keyboard, case, and cooling solution, so the […]

Posted on

Gumstix Introduces CM4 to CM3 Adapter, Carrier Boards for Raspberry Pi Compute Module 4

Raspberry Pi Trading has just launched 32 different models of Raspberry Pi CM4 and CM4Lite systems-on-module, as well as the “IO board” carrier board. But the company has also worked with third-parties, and Gumstix, an Altium company, has unveiled four different carrier boards for the Raspberry Pi Compute Module 4, as well as a convenient CM4 to CM3 adapter board that enables the use of Raspberry Pi CM4 on all/most carrier boards for the Compute Module 3/3+. Raspberry Pi CM4 Uprev & UprevAI CM3 adapter board Gumstix Raspberry Pi CM4 Uprev follows the Raspberry Pi Compute Module 3 form factor but includes two Hirose connectors for Computer Module 4. The signals are simply routed from the Hirose connectors to the 200-pin SODIMM edge connector used with CM3. Gumstix Raspberry Pi CM4 Uprev is the same except it adds a Google Coral accelerator module. Gumstix Raspberry Pi CM4 Development Board Specifications: […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Raspberry Pi CM4 and CM4Lite Modules Launched for $25 and Up

We were expecting Raspberry Pi Compute Module 4 sometimes next year, but Raspberry Pi Trading Limited managed to launch the new module much earlier, as Raspberry Pi CM4 and CM4Lite modules have just been launched with a new, much more compact form factor incompatible with the earlier Compute Modules, an I/O board making use of the new features, and a choice of 32 models with variations in terms of memory and storage capacity, as well as the presence or lack thereof of a WiFi and Bluetooth wireless module. Raspberry Pi CM4 & CM4Lite Specifications: SoC – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz with VideoCore VI GPU System Memory – 1, 2, 4, or 8GB LPDDR4-3200 SDRAM Storage – CM4: 4, 8, 16, or 32GB eMMC flash up to 100MB/s; CM4Lite: No storage device on module Networking Gigabit Ethernet transceiver Optional Wireless module with 802.11b/g/n/ac WiFi 5 and Bluetooth […]

Posted on

Raspberry Pi Gets 5G Cellular Connectivity with Snapdragon X55 Powered HAT

The Raspberry Pi board has long been able to connect to cellular networks either via USB dongles or 3G or 4G LTE HATs that often include GPS as a bonus. But you can now connect your Raspberry Pi 4 or other RPI SBC with a 40-pin header to 5G networks thanks to Waveshare SIM8200EA-M2 5G HAT for Raspberry Pi powered by Qualcomm Snapdragon X55 multi-mode multi-band modem offering 5G/4G/3G cellular connectivity. As we can see from the photo, the 5G add-on comes as part of a cool-looking kit with bottom and top acrylic plates, spacers, a cooling fan plus five antennas for cellular and GNSS connectivity. But the HAT itself integrates a SimCOM SIM8200EA-M2 M.2 module and offers the following specifications: Compatibility – Works with Raspberry Pi boards with a 40-pin GPIO extension header Cellular Connectivity SIM8200EA-M2 core module based on Qualcomm Snapdragon X55 platform with multi-mode multi-band support 5G/4G/3G […]

Khadas VIM4 SBC