CNX Software - Embedded Systems News

September 22, 2022September 22, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

AAEON ARES-500AI embedded box PC features 22 TOPS Huawei Atlas 200 AI accelerator module

AAEON ARES-500AI embedded PC Huawei Atlas 200 AI module

ARES-500AI is another embedded box PC from AAEON, but instead of the usual Intel or NVIDIA Jetson accelerators, it integrates a Huawei Atlas 200 AI accelerator module based on the Ascent 310 chip delivering up to 22 TOPS of AI performance and is designed for the Chinese market. The Linux computer supports up to 8GB RAM, SSD and MicroSD storage, and is equipped with four Gigabit Ethernet ports, some USB 3.0 ports, but somehow no video output port. Designed for industrial computer vision applications, the system supports a wide 9V to 36V power input. ARES-500AI Specifications: AI module – Huawei Atlas 200 based on Ascend 310 with 22/16/8 TOPS INT8, 11/8/4 TFLOPS FP16 System Memory – 4GB or 8GB LPDDR4X Storage – SSD and microSD card sockets Video decoding H.265 & H.264 up to 16 channels @ 1080p30, up to 2 channels @ 4Kp60 JPEG decoding up to 1080p […]

September 22, 2022September 22, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

OnLogic IGN800 Industrial Raspberry Pi Edge Gateway runs Ignition Edge software

OnLogic IGN800 is an industrial edge gateway based on the Raspberry Pi CM4 module pre-loaded with the Ignition Edge HMI, SCADA (Supervisory Control And Data Acquisition), MES, and IIoT software platform from Inductive Automation. The hardware is not exactly new, as the Onlogic IGN800 is simply the OnLogic Factor 201 industrial PC introduced earlier this year, but that ships with Ignition Edge in order to provide a cost-effective solution for automation projects. OnLogic IGN800 specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – Optional M.2 SATA SSD (See Expansion section) Video Output – HDMI port up to 4Kp60 Networking 2x Gigabit Ethernet LAN (Optional PoE PD Input) via Realtek RTL8153 controller Optional WiFi/Bluetooth module on Raspberry Pi CM4 module + 3x antenna holes Optional 4G LTE wireless module […]

September 21, 2022December 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Makerfabs 3.5-inch TFT touchscreen display features ESP32-S3 SoC

Makerfabs 3.5-inch wireless parallel TFT display with Touch

Makerfabs has launched a 3.5-inch TFT touchscreen display with built-in WiFi and Bluetooth connectivity through an ESP32-S3 dual-core Tensilica LX7 microcontroller clocked at 240 MHz with vector instructions for AI acceleration. This display offers a 320×480 resolution through the ILI9488 LCD driver, uses a 16-bit parallel interface for communication with ESP32-S3 clocked at up to 20 Mhz making it suitable for smooth graphics user interface, and the company also claims it is smooth enough for video displays, but more on that later. Specifications: Wireless module – ESP32-S3-WROOM-1-N16R2 with Espressif Systems ESP32-S3 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, 2.4 GHz WiFi 4 and Bluetooth 5.0 LE with support for long-range, up to 2Mbps data rate, mesh networking 16MB QSPI flash 2MB PSRAM PCB antenna Storage – MicroSD card socket Display – 3.5-inch color TFT LCD with 480×320 resolution, 16-bit parallel interface […]

September 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Intel N100 & N200 Alder Lake-N SKUs could be the first “Intel Processor” processors

Intel recently announced they would kill the Celeron and Pentium brands for entry-level PCs, and replace these with the “Intel Processor” brand for notebooks from 2023 onwards, meaning we would get “Intel Core” and “Intel Processor” processors depending on the market segment. The Intel N100 & N200, or more exactly the Intel Processor N100 and Processor N200, Alder Lake-N SKUs may be the first chips with the new branding. They were discovered by Coelacanth-Dream while looking at some Linux boot logs. Intel Processor N100:

<6>[    0.000000] DMI: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3301.A00.2207190854 07/19/2022
<6>[    0.000000] tsc: Detected 800.000 MHz processor
<6>[    0.324882] smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0)
<6>[    0.335923] smp: Brought up 1 node, 4 CPUs

<6>[ 0.000000] DMI: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3301.A00.2207190854 07/19/2022

<6>[ 0.000000] tsc: Detected 800.000 MHz processor

<6>[ 0.324882] smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0)

<6>[ 0.335923] smp: Brought up 1 node, 4 CPUs

Intel Processor N200:

<6>[    0.000000] DMI: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3301.A00.2207190854 07/19/2022
<6>[    0.000000] tsc: Detected 1000.000 MHz processor
<6>[    0.319625] smpboot: CPU0: Intel(R) N200 (family: 0x6, model: 0xbe, stepping: 0x0)
<6>[    0.430132] smp: Brought up 1 node, 4 CPUs

<6>[ 0.000000] DMI: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3301.A00.2207190854 07/19/2022

<6>[ 0.000000] tsc: Detected 1000.000 MHz processor

<6>[ 0.319625] smpboot: CPU0: Intel(R) N200 (family: 0x6, model: 0xbe, stepping: 0x0)

<6>[ 0.430132] smp: Brought up 1 node, 4 CPUs

Both processors appear pretty similar but the boot logs show the N100 with an 800 MHz base frequency, and the N200 with a 1,000 MHz base frequency. Coelacanth-Dream further analyzed the data and found extra information about the Alder Lake-N processors as shown in the table below. The new SKUs will not feature “big” Performance cores at all, and only […]

September 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

$199+ NVIDIA Jetson Orin Nano system-on-module delivers up to 40 TOPS

NVIDIA Jetson Orin Nano system-on-module (SoM) is an update to the Jetson Nano entry-level Edge AI and robotics module that delivers up to 40 TOPS of AI performance, meaning it’s up to 80 times faster than the original module. The new SoM features an hexa-core Arm Cortex-A78AE processor, an up to 1024-core NVIDIA Ampere architecture GPU with 32 Tensor cores, up to 8GB RAM, and the same 260-pin SO-DIMM connector found in the Jetson Orin NX modules. Two versions are offered with the following specifications: That means the Jetson Orin family has now six modules ranging from 20 TOPS to 275 TOPS. There’s no specific development kit for the Jetson Orin Nano SoM since it can be emulated on the NVIDIA Jetson AGX Orin developer kit, and supported by the JetPack 5.0.2 SDK based on Ubuntu 20.04. NVIDIA has tested some dense INT8 and FP16 pre-trained models from NGC and […]

September 20, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

JeVois-Pro ultra-compact deep learning camera gets 26 TOPS Hailo-8 AI accelerator

JeVois-Pro tiny AI camera was introduced last year with an Amlogic A311D processor with a built-in 5 TOPS NPU, and support for an Intel Myriad X or Google Edge TPU M.2 card all that in a compact 50x50x45 mm box. The company has now managed to get hold of some M.2 A+E 2230 Hailo-8 modules delivering up to 26 TOPS of AI performance and is selling for JeVois-Pro ultra-compact deep learning camera with the Hailo-8 accelerator for $599 delivering up to 31 TOPS once we include the built-in 5 TOPS NPU. I won’t go through the full specifications again, but in a nutshell, that’s a camera designed for robotics projects, powered by an Amlogic A311D hexa-core Cortex-A73/A53 processor with 4GB RAM, a microSD card socket for the OS and data, and a 2MP Sony IMX290 Starvis sensor. Since the system is quite compact and the AI accelerator fairly powerful, […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

September 20, 2022February 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Khadas Edge2 Pro review – A Rockchip RK3588S SBC tested with Ubuntu 22.04

We’ve had a sample of the Khadas Edge2 single board computer powered by Rockchip RK3588S octa-core Cortex-A76/A55 processor for a couple of weeks, and now that the board is officially launched we can post our review of the board with Ubuntu 22.04, and we’ll check out Android 12 later on. Khadas Edge2 Pro accessories The Khadas Edge2 comes in two variants: Basic and Pro, We received the Edge2 Pro SBC with 16GB RAM and 64GB flash that ships with two WiFi antennas by default, but the company also sent a low-profile fansink and thermal pad for cooling that in theory would be optional, but in practice, it is required as while the board runs fairly cool considering the performance it brings, it still needs a heatsink to prevent overheating and throttling. The fan may not really be necessary though as we’ll see below. I’d recommend installing the antennas before the […]

September 20, 2022September 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ChipWhisperer-Husky is a palm-sized power analysis and fault injection tool (Crowdfunding)

power analysis fault injection tool STM32F Target Board

NewAE Technology’s ChipWhisperer-Husky is a compact tool designed for side-channel power analysis and fault injection with features such as a high-speed logic analyzer used to visualize glitches, real-time data streaming for attacking asymmetric algorithms, and support for JTAG/SWD programming. The security research company explains its device delivers a more stable and reliable experience compared to other off-the-shelf test gear such as oscilloscopes and function generators thanks to features such as synchronous sampling, which means the sample clock of your target device and the sample clock of ChipWhisperer-Husky can be perfectly aligned, or the ability to generate glitches, including clock glitches that can be less than a nanosecond wide. ChipWhisperer-Husky key features and hardware specifications: Synchronous clock for capture board and target board for significantly improved performance over a typical asynchronous oscilloscope setup 12-bit 200MS/s ADC for capturing power traces – It can be clocked at both the same clock […]

Boardcon Rockchip and Allwinner SoM and SBC products