Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on T-Camera S3 – An ESP32-S3 board with camera, display, PIR motion sensor, and microphone

T-Camera S3 – An ESP32-S3 board with camera, display, PIR motion sensor, and microphone

T Camera S3

LilyGO has launched a new ESP32-S3 WiFi & BLE camera board with the T-Camera S3 also featuring a small display, a PIR motion sensor, and a microphone, as well as an optional plastic shell. The T-Camera S3 is an evolution of the TTGO T-Camera ESP32 board introduced in 2019 with many of the same features, but the ESP32 microcontroller has been replaced with an ESP32-S3 microcontroller with vector extensions that makes it suitable for machine learning and computer vision applications. The new board also comes with a larger 16 MB SPI flash, more I/Os, and a few other small changes. T-Camera S3 specifications: ESP32-S3-WROOM-1 wireless module SoC –  ESP32-S3FN16R8 dual-core Tensilica LX7 microcontroller @ 240 MHz (Note: this SKU is not listed in the official ESP32-S3 datasheet) with 2.4 GHz 802.11n WiFI 4 and Bluetooth 5.0 LE connectivity Memory – 8MB PSRAM Storage – 16MB SPI flash Camera – 2MP […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on $96+ Banana Pi BPI-M2S Amlogic A311D/S922X SBC offers dual GbE, optional PoE and WiFi 5

$96+ Banana Pi BPI-M2S Amlogic A311D/S922X SBC offers dual GbE, optional PoE and WiFi 5

Amlogic A311D and S922X SBC

The Banana Pi PPI-M2S is a single board computer (SBC) powered by either Amlogic A311D or S922X processor with 4GB RAM, 16GB eMMC flash, HDMI 2.1 and MIPI DSI display interfaces, one MIPI CSI camera connector, two Gigabit Ethernet ports with one PoE capable, as well as optional WiFi 5 & Bluetooth support. When we first covered the Banana Pi BPI-M2S over a year ago, all we had were some 3D renders of the board and some preliminary specifications. The company has now manufactured the board, provided some documentation, and started to take orders for the board on Aliexpress for $95.79 or $100 depending on whether Amlogic S922X or A311D is selected. Banana Pi BPI-M2S specifications: SoC – Amlogic A311D or S922X hexa-core processor with 4x Arm Cortex-A73 cores @ 2.21 GHz, 2x Arm Cortex-A53 cores @ 1.8 GHz, Arm Mali-G52 MP4 (6EE) GPU with OpenGL ES 3.2, Vulkan 1.0 […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Linux 6.2 exFAT update to improve performance when creating files and directories

Linux 6.2 exFAT update to improve performance when creating files and directories

Linux 6.2 exFAT

The exFAT file system is about to get faster in Linux 6.2, at least when creating files and directories, with the performance boost especially noticeable on low-end processors. Microsoft released the exFAT specification and announced Linux support in August 2019, which was followed by a new exFAT implementation in Linux 5.7 (June 2020) from Samsung.  But people are still working on improving exFAT Linux support, and Yuezhang Mo, an engineer at Sony, committed a patchset for Linux 6.2 that reduces repeated traversal of directory entries to boost the performance of exFAT: After traversing all directory entries, hint the empty directory entry no matter whether or not there are enough empty directory entries. After this commit, hint the empty directory entries like this: 1. Hint the deleted directory entries if enough; 2. Hint the deleted and unused directory entries which at the end of the cluster chain no matter whether enough […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Pinecil V2 Bluetooth LE soldering iron gets a web interface

Pinecil V2 Bluetooth LE soldering iron gets a web interface

Web interface Pinecil V2 soldering iron

It’s now possible to make use of the Pinecil V2 soldering iron‘s Bluetooth LE connectivity through a web-based interface used to monitor and/or set the temperature and power of the RISC-V soldering iron. When the Pinecil V2 soldering iron was launched with a Bouffalo Lab BL706 RISC-V Bluetooth microcontroller last summer, we were told there were main potential cases to make use of the Bluetooth LE features: OTA firmware upgrade and remote telemetry and control. The latter is now being taken care of by Joric who has written a  web application to visualize telemetry data and even control the temperature of the soldering iron. To be able to use the Bluetooth features, you’ll first need to install the latest Pinecil V2 firmware with blisp flashing utility before going to https://joric.github.io/pinecil to pair your soldering iron as explained in the wiki. Note the implementation relies on the Web Bluetooth API which […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on TopTon TP-X4F mini PC with four 2.5GbE ports features up to AMD Ryzen 7 5825U processor

TopTon TP-X4F mini PC with four 2.5GbE ports features up to AMD Ryzen 7 5825U processor

AMD Ryzen 4x 2.5GbE ports

TopTon TP-X4F is a mini PC and network appliance equipped with four 2.5GbE ports and powered by a choice of processors from the AMD Ryzen 5000U series up to the Ryzen 7 5825U octa-core-16-thread processor. The system supports up to 64GB RAM and up to five high-speed internal SATA or NVMe storage devices through M.2 sockets and SATA connectors and comes with three 4K display interfaces: HDMI, DisplayPort, and  USB-C, as well as four USB ports. TopTon TP-X4F specifications: SoC (one or the other) Ryzen 5 5600U hexa-core/12-thread processor @ 2.3 GHz / 4.2 GHz with Radeon Vega 7 graphics @ 1.8 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5800U octa-core/16-thread processor @ 1.9 GHz / 4.4 GHz with Radeon Vega 8 graphics @ 2.0 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5825U octa-core/16-thread processor @ 2.0 GHz / 4.5 GHz with Radeon Vega 8 graphics @ 2.0 GHz; TDP: […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on OpenPLC open-source Programmable Logic Controller Suite works with Arduino, ESP8266/ESP32, Raspberry Pi, etc.

OpenPLC open-source Programmable Logic Controller Suite works with Arduino, ESP8266/ESP32, Raspberry Pi, etc.

OpenPLC Editor

OpenPLC is an open-source, free-to-use Programmable Logic Controller Suite, compliant with the IEC 61131-3 standard, and working with a range of hardware platforms such as Arduino, ESP8266/ESP32, Raspberry Pi SBCs, as well as Windows and Linux machines. When Arduino unveiled the Arduino PLC IDE, we noted the languages defined by the IEC 61131-3 standard were licensed, and the PLC key for the Portenta Machine Control unit sold for $17.60. One reader complained about the high license cost per device, but Massimo Banzi, the co-founder of the Arduino project, replied it was cost-effective for smaller deployments: Actually it’s not that much money compared to the cost of other PLC software (thousands of dollars per seat!). This model helps small companies with not that many devices.. It’s possible to negotiate bulk licenses for companies. But there’s also another option with OpenPLC open-source PLC suite that does not require any license fee. That’s […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on TOOCA Laser L1 review – An affordable 5W laser engraver

TOOCA Laser L1 review – An affordable 5W laser engraver

TOOCA Laser L1 review

ELECFREAKS’ TOOCA Laser L1 is an affordable 5W laser engraver with a sturdy yet lightweight structure and that can engrave various materials including metals. It’s easy to use with a one-button press and suitable for education in schools. TOOCA Laser L1 laser engraver unboxing The laser engraver comes as a kit with components that can be easily assembled. It was well-packed with little risk of being damaged during transport. It also includes tools and instructions for assembly, and you don’t need any extra tools to complete the assembly. TOOCA Laser L1 specifications The machine measures 568x632x198 mm, weighs 3.2 kg only so it can easily be carried around, and offers a 400×415 mm working area. It works with Windows and macOS and only requires 24V power available through the provided power adapter. A wide range of file types are supported, and the device can engrave many types of materials and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on LapPi 2.0 – A DIY laptop for Raspberry Pi 4 and other single board computers (Crowdfunding)

LapPi 2.0 – A DIY laptop for Raspberry Pi 4 and other single board computers (Crowdfunding)

LapPi 2.0 DIY Raspberry Pi laptop

The LapPi 2.0 is a DIY laptop kit with an acrylic enclosure, a UPS HAT with a 18650 battery holder, and off-the-shelf parts including speakers, a touchscreen display, a Raspberry Pi camera, and a wireless keyboard that’s suitable for the Raspberry Pi 4 and pretty much any other small single board computer from Radxa, Orange Pi, Banana Pi, FriendlyElec, Hardkernel, and others. We’ve seen several Raspberry Pi laptops over the years with the CrowPi L and Pi-Top, and I have to say the LapPi 2.0 is not the most eye-pleasing or sophisticated design, but at least, it’s versatile and not limited to the Raspberry Pi family. LapPi 2.0 kit content and highlights: Display – 7-inch 5-point capacitive touchscreen IPS display with 1024×600 resolution support for audio output via 3.5mm audio jack and 4-pin header Camera – Official 8MP Raspberry Pi Noir camera with night vision support Audio – 2x 5W/8 […]

Boardcon EM3562 Rockchip RK3562 SBC with 8 analog camera inputs