CNX Software - Embedded Systems News

October 7, 2022October 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

ODROID-Go Ultra Amlogic S922X portable gaming console and devkit launched for $111

Hardkernel ODROID-Go Ultra (OGU) portable gaming console and devkit is powered by the same Amlogic S922X hexa-core Cortex-A73/A53 processor found in the company’s ODROID-N2+ SBC. The new model also adds a 16GB eMMC flash for faster storage and increases the RAM capacity to 2GB. The Korean company’s adventure with portable gaming consoles started with the ESP32-based ODROID-Go to celebrate its 10th birthday in 2018. At the time it looked like a side project, but the console was popular enough that they released their first Linux handheld game console with the ODROID-Go Advance (OGA) in 2019, and then the ODROID-Go Super (OGS) in 2020 with a larger 5-inch display, and both equipped with a Rockchip RK3326 quad-core Cortex-A35 processor. The new ODROID-Go Ultra is based on the same design as the OGS model, but with a serious jump in performance, and the ability to support more demanding emulators. ODROID-Go Ultra specifications: […]

October 7, 2022January 23, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

UP Element i12 Edge embedded computer is equipped with Intel’s NUC 12 Compute Element

AAEON’s UP Bridge the Gap has announced the UP Element i12 Edge fanless embedded computer based on the Intel NUC 12 Compute Element and designed for the autonomous mobile robot (AMR) and industrial automation markets. The computer is fitted with NUC 12 Compute Element equipped with 12th generation Alder Lake hybrid processor from Celeron 7350 to Intel Core i7-1255U hybrid processor, supports up to 32GB LPDDR5 memory, NVMe support, offers three Ethernet ports including one 2.5GbE, several USB ports, two RS232/422/485 interfaces, a DIO header, and more. UP Element i12 Edge specifications: System-on-module – Intel NUC 12 Compute Element with: Alder Lake SoC (one or the other) Intel Core i7-1255U 10-core processor with 2x Performance cores @ up to 4.7 GHz, 8x Efficiency cores @ up to 3.5 GHz, Intel Iris Xe Graphics; PBP: 15W Intel Core i5-1235U 10-core processor with 2x Performance cores @ up to 4.4 GHz, 8x Efficiency […]

October 6, 2022October 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Ubuntu Pro becomes free for individuals and small companies

Canonical has launched free Ubuntu Pro subscriptions for individuals and small companies for up to five machines, enabling anybody to get longer-term support and features that were only reserved to paying enterprise customers so far. Canonical provides Ubuntu for free with LTS versions released every two years and supported for 5 years. The latest Ubuntu 22.04 LTS was released in April 2022, meaning it will be supported until April 2027. But if you’d like to get 10-year support and extra security features you can now do it for free through an Ubuntu Pro subscription for up to 5 machines. Let’s compare the key differences between Ubuntu LTS and Ubuntu Pro first. You’ll get 10 years of support instead of 5 with Ubuntu Pro and as well as improved security. If you are upgrading to the latest LTS soon after it is out, the 10-year support may not be worth much […]

October 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Allwinner V851S/V851SE low-cost camera SoC embeds 64MB DDR2, a 0.5 TOPS NPU

Allwinner V851S/V851SE is a single-core Arm Cortex-A7 SoC with a RISC-V core, an H.265/H.264 video encoder, and a 0.5 TOPS NPU designed for Smart IP cameras with support for features such as human detection and crossing alarms. Both processors ship with 64MB DDR2 memory, and feature USB, Ethernet, and SDIO interfaces, but the V851S is designed for systems with a display, while the V851SE targets traditional headless IP cameras. Both processors are pretty similar, but here are the key differences between Allwinner V851S: Networking – 10/100 Mbps Ethernet port with RMII interface GPIO – 6x ports (PA, PC, PD, PE, PF, PH) Display LCD Parallel RGB, Serial RGB, i8080, BT656 2-lane MIPI DSI SPI – 4x SPI and Allwinner V851SE: Networking – SIP 100 Mbps EPHY GPIO – 5x ports (PA, PC, PE, PF, PH) Display – Not supported SPI – 3x SPI That means the Allwinner V851S requires an […]

October 6, 2022October 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Unexpected Maker TinyS3, FeatherS3 and ProS3 boards feature ESP32-S3 dual-core wireless MCU

Seon Rozenblum, better known as Unexpected Maker, has launched upgrades to its ESP32-S2 boards such as the TinyS2 with ESP32-S3 variants, namely TinyS3, FeatherS3, and ProS3 boards. The new boards share the same form factors as the TinyS2, FeatherS2, and ProS2, but they get a more powerful dual-core microcontroller with AI instructions and 512kB SRAM. The microcontroller also adds Bluetooth 5.0 Low Energy (BLE) connectivity with Bluetooth Mesh support, instead of just WiFi 4 connectivity found in the earlier boards. TinyS3, FeatherS3, and ProS3 boards share the following features: SoC – Espressif Systems’ ESP32-S3 with Dual-core 32bit Xtensa LX7 microcontroller up to 240MHz RISC-V ULP Co-processor 512KB SRAM 2.4GHz Wifi 4 (802.11b/g/n) Bluetooth 5.0 BLE + Mesh Memory – 8MB QSPI PSRAM Flash – 8MB to 16MB depending on the model. USB – 1x USB Type-C connector with reverse back-feed protection for power and programming Antenna – 3D high gain […]

October 5, 2022October 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

RelayFi – A Tasmota compatible 4-channel relay board (Crowdfunding)

CoreData Global, a Singapore-based research and development firm, has just introduced the RelayFi 4-channel relay board based on ESP32 and compatible with Tasmota open-source firmware, as well as Espressif’s ESP RainMaker cloud and ESP-NOW networking API. RelayFi is fitted with an ESP32-WROOM-32D WiFi and Bluetooth module, four relays capable of handling a load of 250 VAC/7A or 30 VDC/10A, and EL817C Optoisolators for safety. The board also comes with CH340C USB to TTL chip for programming, an I2C header for expansion, and some jumpers for relay selection. RelayFi specifications: Wireless module – Espressif Systems’ ESP32-WROOM-32D module with ESP32 dual-core Tensilica microcontroller, 32Mbit SPI flash, Wi-Fi 802.11 b/g/n up to 150 Mbps, Bluetooth 4.2 LE, and PCB antenna Relays 4x relays up to 250VAC/7A or 30VDC/10A 4x EL817C optocouplers for safety 4x relay status LEDs Screw terminals Relay selection jumper USB – 1x micro USB port for power and programming via […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

October 5, 2022October 5, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas RZ/V2MA microprocessor embeds AI & OpenCV accelerators for image processing

Renesas has launched the RZ/V2MA dual-core Arm Cortex-A53 microprocessor with a low-power (1TOPS/W) DRP-AI accelerator and one OpenCV accelerator for rule-based image processing enabling vision AI applications. The MPU also supports H.265 and H.264 video decoding and encoding, offers LPDDR4 memory and eMMC flash interfaces, as well as Gigabit Ethernet, a USB 3.1 interface, PCIe Gen 2, and more. The RZ/V2MA microprocessor targets applications ranging from AI-equipped gateways to video servers, security gates, POS terminals, and robotic arms. Renesas RZ/V2MA specifications: CPU – 2x Arm Cortex-A53 up to 1.0GHz Memory – 32-bit LPDDR4-3200 Storage – 1x eMMC 4.5.1 flash interface Vision and Artificial Intelligence accelerator DRP-AI at 1.0 TOPS/W class OpenCV Accelerator (DRP) Video H.265/H.264 Multi Codec Encoding: h.265 up to 2160p, h.264 up to 1080p Decoding: h.265 up to 2160p, h.264 up to 1080p Networking – 1x Gigabit Ethernet USB – 1x USB 3.1 Gen1 host/peripheral up to 5 […]

October 5, 2022October 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

The BBC has released a new web-based Python editor for the micro:bit board

There are already Python editors such as Thonny, but the BBC thought those were not good enough and released a new web-based Python editor specifically designed for the micro:bit education board targeting 11 to 14 years old pupils. The micro:bit Python editor includes drag and drop code examples, code structure & error highlighting, auto-complete feature, a simulator to test the code before uploading it to the micro:bit board, and a Quick ideas section to help pupils get started with projects. The BBC’s micro:bit Python editor works with both the micro:bit V1 and V2, but note the simulator shows a micro:bit V2, so if you are using the previous generation micro:bit, some code may work on the simulator but not on your micro:bit V2 board. For that reason, the BBC marked the code that only works on a micro:bit V2 with ‘V2’ in the Reference section. While the BCC is a […]