CNX Software - Embedded Systems News

October 14, 2022October 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Home Assistant launches SkyConnect USB stick with Zigbee, Thread, Matter support

The Home Assistant SkyConnect is a USB stick with support for Zigbee, Matter, and Thread connectivity designed to work with the popular Home Assistant open-source home automation solution, and enables users to bring Home Assistant Yellow (previously known as Home Assistant Amber) functionality to any platform running Home Assistant. The USB dongle is based on a Silicon Labs EFR32MG21 Gecko Series 2 Arm Cortex-M33 wireless microcontroller with an 802.15.4 multi-protocol 2.4 GHz radio that can concurrently run both Zigbee 3.0 (EmberZNet/EZSP) and Thread/Matter (OpenThread/Spinel) stacks/protocols at the same time by using firmware in RCP RCP (Radio Co-Processor) mode. Home Assistant SkyConnect specifications: MCU – Silabs EFR32MG21 Arm Cortex-M33 microcontroller @ up to 80 MHz with DSP and FPU, up to 1024 KB flash, up to 96 KB RAM, 2.4 GHz radio Wireless Protocols – Zigbee, Matter, Thread TX Power – up to +20dBm RX sensitivity – -104dBm (250kbps) 2.4 GHz […]

October 13, 2022November 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Beelink GTR6 mini PC packs an AMD Ryzen 9 6900HX processor, up to 64GB RAM

Beelink GTR6 is a mini PC powered by a 45W AMD Ryzen 9 6900HX octa-core/16-thread processor @ up to 4.9 GHz with 12-core Radeon 680M graphics, taking up to 64GB DDR5, and M.2 2280 PCIe Gen4 SSD storage. Once upon a time mini PCs were powered by low-power processors for fanless or near-silent operation, but in recent years, companies have started to integrate faster and faster powerful into the mini PC form factor. The Beelink GTR6 may be one of the most powerful mini PC so far thanks to the AMD Ryzen 9-6900HX CPU. Beelink GTR6 preliminary specifications: SoC – AMD Ryzen 9 6900HX octa-core/16-thread Zen 3+ processor @ up to 3.3 GHz / 4.9 GHz (Turbo) with 12-core Radeon 680M graphics (RDNA2 architecture) @ up to 2.4 GHz; TDP: 45W System Memory – 2x DDR5-4800MHz SODIMM sockets for up to 64GB RAM (32GB by default) Storage M.2 2280 NVMe […]

October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Vecow launches NVIDIA Jetson AGX Orin-based EAC-5000 Series Edge AI computing system

Vecow EAC-5000 Jetson AGX Orin embedded computer

Vecow EAC-5000 is a rugged AI computing system powered by NVIDIA’s Jetson AGX Orin 32GB or 64GB system-on-module designed for advanced edge AI applications such as in-vehicle computing, robotic control, machine vision, intelligent video analytics, and mobile robots. The embedded computer delivers up to 275 TOPS of AI performance thanks to the NVIDIA module, supports up to eight GMSL2 cameras, various wireless connectivity options with 6 antennas, 9V to 50V wide range DC power input, and operates in the -20°C to 70°C temperature range. Vecow EAC-5000 specifications: System-on-Module EAC-5000-R32 – NVIDIA Jetson AGX Orin 32GB with CPU – 8-core Arm Cortex-A78AE v8.2 64-bit processor @ 2.2 GHz with 2MB L2 + 4MB L3 cache GPU / AI accelerators NVIDIA Ampere architecture with 1792 NVIDIA CUDA cores and 56 Tensor Cores @ 1 GHz DL Accelerator – 2x NVDLA v2.0 @ up to 1.4 GHz Vision Accelerator – PVA v2.0 (Programmable […]

October 13, 2022April 24, 2024 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Mekotronics LS1200 “live streaming” box is powered by MediaTek Genio 1200 SoC

Mekotronics LS1200 is a mini PC powered by a MediaTek Genio 1200 (MT8395) octa-core Cortex-A78/A55 processor with a 4.8 TOPS NPU, and especially suited to live streaming applications. The system, housed in a metal enclosure, is offered with an unspecified amount of LPDDR4x memory and eMMC flash, HDMI input and output, an eDP (Embedded DisplayPort) interface, a Gigabit Ethernet RJ45 port, WiFi and Bluetooth connectivity, and four USB host ports. Mekotronics LS1200 specifications: SoC – MediaTek Genio 1200 (MT8395) octa-core processor with CPU – 4x Cortex-A78 cores @ 2.2GHz, 4x Cortex-A55 cores @ 2.2GHz GPU – Penta-core Arm Mali-G57 GPU @ 880MHz with support for OpenGL ES 3.2/2.0/1.1, Vulkan 1.1/1.0, OpenCL 2.2, AI accelerator – 4.8 TOPS dual NPU with support for TensorFlow and Caffe models DSP – HiFi 4 audio DSP VPU Encoding up to 4Kp60 with H.265/HEVC Decoding up to 4Kp90, AV1, VP9, HEVC, H.264 codecs supported System Memory […]

October 12, 2022October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 52 Comments

ODROID-H3 and ODROID-H3+ SBC’s feature Intel Celeron N5105, Pentium N6005 processor

There are now not one but two alternatives to the discontinued ODROID-H2+ SBC with the ODROID-H3 and ODROID-H3+ single board computers powered respectively by an Intel Celeron N5105 and Pentium N6005 Jasper Lake processor. Both new SBCs support up to 64GB RAM, significantly faster Intel UHD graphics, an M.2 PCIe Gen 3 socket, and keep the same port assignment with two 2.5GbE ports, two SATA ports, as well as two USB 3.0 and two US 2.0 ports. ODROID-H3/H3+ specifications: SoC ODROID-H3 – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with 24EU Intel UHD graphics @ 450 / 800 MHz (Turbo); 10W TDP ODROID-H3+ – Intel Pentium N6005 quad-core Jasper Lake processor @ 2.0GHz / 3.3GHz (Turbo) with 32EU Intel UHD graphics @ 450 / 900 MHz (Turbo); 10W TDP System Memory – Dual-channel SO-DIMM DDR4 memory (2933MT/s) supporting up to 64GB RAM in total Storage […]

October 12, 2022October 12, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Arduino-shaped development board ships with a Nordic Semi nRF9160 module

Actinius Icarus SoM DK development board follows the Arduino Uno form factor and is equipped with the company’s Icacus SoM based on Nordic Semi nRF9160 system-in-package with LTE Cat-M, NB-IoT, and GPS connectivity. The development kit provides an eSIM on the module and an additional Nano SIM socket on the mainboard, Arduino headers for a wide range of I/Os and compatibility with Arduino Shields, a set of user LEDs, reset and user buttons, and a battery charging port. Icarus SoM DK specifications: Icarus SoM SiP – Nordic Semi nRF9160-SICA system-in-package with Arm Cortex-M33 MCU, 1024 KB flash, 256 KB SRAM, and LTE Cat-M1 (eMTC), Cat-NB1 (NB-IoT), and GPS connectivity Storage – 64Mbit SPI flash On-board eSIM Antennas – 2x u.FL connectors for LTE and GPS Sensor – Low power 3-axis accelerometer I/Os – 2x 20 castellated holes with GPIOS, I2C, SWD, Reset, SIM card signals, and power pins Supply Voltage […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

October 12, 2022October 12, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

SBC Case Builder 2.0 released with GUI

SBC Case Builder 2.0 tool to create enclosures for single board computers has been released with a customizer graphical user interface, additional cases & SBCs, support for variable height standoffs, and more. We wrote about the SBC Case Builder tool to easily generate various types of 3D printable enclosures using OpenSCAD earlier this year. The SBC Model Framework used in the solution was focused on ODROID boards, and you had to type the parameters in a configuration file. SBC Case Builder 2.0 software changes that with a convenient-to-use graphical interface allowing for the dynamic adjustment of any of the case attributes. The new version of the software also supports variable height standoffs, multi-associative parametric accessory positioning, and offers 8 “base cases”, namely shell, panel, stacked, tray, round, hex, snap, and fitted. The solution works with 47 SBCs defined in the latest version of the SBC Model Framework. The following SBCs […]

October 11, 2022October 11, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Tiger Lake embedded Box PC offers V-by-One and eDP Interfaces

Distec BoxPC Pro NPA-2009 is an embedded Box PC powered by a Celeron 6305E, Intel Core-i3 1115G4E, Core i5-1145G7E, or Core-i7-1185G7E Tiger Lake processor that offers both V-by-One and eDP interfaces to connect to high-resolution displays. The system supports up to 64GB RAM, NVMe stoage, dual Gigabit Ethernet, and optional WiFi and cellular connectivity, and is suitable for info terminals, medical equipment, and transportation applications. Distec BoxPC Pro NPA-2009 specifications: Tiger Lake SoC (one or the other) Intel Core i5-1145G7E (default) quad-core/8-thread processor @ 1.50 GHz / 4.10 GHz (Turbo) with 80 EU Intel Iris Xe Graphics; TDP: 12W to 28W Intel Core i7-1185G7E quad-core/8-thread processor @ 1.80 GHz / 4.40 GHz (Turbo) with 96 EU Intel Iris Xe Graphics; TDP: 12W to 28W Intel Core i3-1115G4E dual-core/4-thread processor @ 2.20 GHz / 3.90 GHz (Turbo) with 48 EU Intel UHD Graphics; TDP: 12W to 28W Intel Celeron 6305E dual-core […]

Boardcon Rockchip and Allwinner SoM and SBC products