Posted on

Play High-end PC Games on ARM Linux Boards with Moonlight Embedded

Nvidia first showcased PC games streaming to Nvidia Project SHIELD Game Console at CES 2013, and since then Moonlight project has been created to provide an open source implementation compatible with Nvidia Gamestream, and supported on Linux, Mac OS and Windows PC, Android & iOS mobile devices, as well as Samsung VR kits. There’s also an implementation called Moonlight Embedded designed for ARM Linux platforms such as Raspberry Pi,ODROID, Cubox-i boards, and ODROID-C1 and ODROID-C2 boards even got support for H.265 streaming very recently allowing for better quality over H.265 at a given bit rate, and possibly 4K @ 60 Hz gaming on ODROID-C2 board. You’ll need a Windows gaming PC with an Nvidia GTX 600/700/900 series GPU, a wired connecting or a high-end 802.11 router or greater, and Nvidia Geforce Experience (GFE) installed on your PC. H.265 requires an Nvidia 900 series GPU such as Nvidia GTX960. Once this […]

Posted on

Linux 4.5 Released – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.5 on Sunday: So this is later on a Sunday than my usual schedule, because I just couldn’t make up my mind whether I should do another rc8 or not, and kept just waffling about it. In the end, I obviously decided not to,but it could have gone either way. We did have one nasty regression that got fixed yesterday, and the networking pull early in the week was larger than I would have wished for. But the block  layer should be all good now, and David went through all his networking commits an extra time just to make me feel comfy about it, so in the end I didn’t see any point to making the release cycle any longer than usual. And on the whole, everything here is pretty small. The diffstat looks a bit larger for an xfs fix, because that fix has […]

Khadas Edge2 Arm mini PC
Posted on

$100 Chuwi Ilife V5S Autonomous Robotic Vacuum Cleaner Offers an Alternative to iRobot Roomba

iRobot Roomba autonomous vacuum cleaners have been around since 2002, with the robots automatically cleaning the floor, detecting walls and edges, going around table and chair feet, etc… The company also produced iCreate 2 programmable robot for educators, students and developers who wants to learn about robotics, and works with Arduino and Raspberry Pi boards. I had seen similar cleaners from Chinese vendors in the past, with prices starting at $30, but they looked basically useless based on the specs, but yesterday I discovered Chuwi Ilife V5S robotic vacuum cleaner and mop that seems pretty decent, and even can go back to its charging station automatically. Chuwi Ilife V5S key features and specifications: Anti-collision System, drop avoidance induction 50db low noise design; 850pa strong suction Sensors – 10 IR sensor on sides and bottom, OBS (Optical backscatter point sensor) sensors, 1 set wall sensor. (Note: OBS is based on IR, […]

Posted on

Using a Cheap USB Microscope To Read IC Part Numbers

It’s not always easy to read the part number on IC you find on boards, and some time ago, I watched a video where Lady Ada used a USB microscope to demonstrate how to solder some components, and probably using that 5.0 MP model sold on Adafruit for about $80. But I found a similar looking USB microscope with a 2.0MP sensor and 1000X magnification on Ebay for $16.59 shipped, so I bought it, received it today, and I’ve given it a try. Such microscopes can be used to inspect skin and hair, PCB, textile, bank notes, jewelery, and so on. There are apparently other models based on the one I purchased with useful features like auto-focus, wireless support, different levels of magnification, and different colors. Supported operating systems include Windows and Linux, Android, and Windows 8 according to the package. The microscope comes with a stand, a CDROM with […]

Posted on

64-bit ARM (Aarch64) Instructions Boost Performance by 15 to 30% Compared to 32-bit ARM (Aarch32) Instructions

Yesterday was quite an eventful day with the launch of two low cost 64-bit ARM development boards, namely Raspberry Pi 3 and ODROID-C2, and as usual there were some pretty interesting discussions related to the launch of the boards in the comments section. One of the subject that came is that while Raspberry Pi 3 board is using a 64-bit processor, the operating systems are still compiled with 32-bit instructions (Aarch32) and even optimized for ARMv6, and they intend to keep it that way according to Eben Upton interview: Eben readily admits that not all the capabilities of the new parts are going to be used at launch, however. “Although it is a 64‑bit core, we’re using it as just a faster 32-bit core,” he reveals about the Pi 3’s central processing unit. “I can imagine there’d be some real benefits [to 64-bit code]. The downside is that you do […]

Posted on

ODROID-C2 64-Bit ARM Development Board is Now Available for Purchase for $40

ODROID-C2 is a quad core 64-bit ARM development board based on Amlogic S905 processor with 2GB RAM that was planned to launch in early March, but maybe unsurprisingly, Hardkernel decided to launch their latest board, the very same day as Raspberry Pi 3 launch. We already knew the specifications, but it’s always useful to mind ourselves of the details: SoC – Amlogic S905 quad core cortex-A53 processor @ 2.0 GHz with 3+2 cores Mali-450 GPU System Memory – 2GB DDR3 SDRAM Storage – eMMC module socket with 8, 16, 32, or 64GB module by Toshiba or Sandisk + micro SD slot supporting UHS-1 SD cards. Video Output – HDMI 2.0 up to 4K @ 60 Hz Connectivity – Gigabit Ethernet (Realtek RTL8211F) USB – 4x USB 2.0 host ports + micro USB OTG port Expansion Header 40-pin header with GPIO, I2C, UART, and ADC ; All I/Os are 3.3V, except […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Rho Board $35 Mstar MSO9280 Development Board Supports an Optional DTV Tuner (Crowdfunding)

Futarque A/S, a Danish company specializing in digital TV (tuners, IPTV), DVD and Blu-ray solutions, has developed the Rho Board powered by Mstar MSO9280 quad core ARM Cortex A7 processor with 1GB RAM and 4GB NAND flash, and featuring HDMI 2.0 output, a Raspberry Pi 2 compatible expansion header, and  a TV tuner connector for an optional DVB-T2/C tuner. Rho board specifications: SoC – Mstar MSO9280PBM quad core Cortex A7 processor with an hexacore (4+2) Mali-450MP GPU System Memory – 1GB DDR3-1666 Storage – 4GB eMMC flash + micro SD slot up tp 128GB Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV and optical S/PDIF Video Codec – MPEG 1/2, 4K @ 60 fps AVC and 4K @ 30 fps H.265 Connectivity – 10/100M Ethernet USB – 2x USB 2.0 ports, 1x micro USB port Expansion 40-pin “Raspberry Pi” header TV tuner connector SDIO expansion […]

Posted on

Kodi 16 “Jarvis” Release

This morning, I saw Kodi installed from Google Play get an update in one of my Android device, and that means that Kodi 16.0 “Jarvis” has now been released. As usual it’s available for Windows, Linux, Mac OS, Android, and iOS, with specific Linux ports for Raspberry Pi boards, and several Freescale/NXP i.MX6 boards such as Wandboard or EzeeCube. You can get the full Changelog in the Wiki, but some of the main changes against Kodi 15 include: Various new features for Live TV and PVR (Personal Video Recorder) Added RDS Radio, FM radio, scheduling recordings of TV shows… Various improvements such as speeding up EPG database access. Added, updated, and improved PVR backend clients addons for all popular third-party external PVR backend platforms: FilmOn, HDHomeRun, Enigma 2, Tvheadend HTSP Client, and so on. Add-ons Framework, API, and Manager improvements Platform Independent Playback improvements : software DTS-HD decode with libdcadec, […]

Khadas VIM4 SBC