Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on MeLE PCG02 Pro mini PC stick supports M.2 NVMe or SATA SSD

MeLE PCG02 Pro mini PC stick supports M.2 NVMe or SATA SSD

MeLE PCG02 Pro mini PC Stick

MeLE PCG02 Pro is a mini PC stick / PC-on-a-stick powered by either an Intel Celeron J4125 Gemini Lake processor or a more recent Celeron N5105 Jasper Lake processor, with support for M.2 NVMe/SSD storage, but only for the Gemini Lake model. The computer is also equipped with 8GB LPDDR4 memory, 128GB to 512GB eMMC flash, two HDMI 2.0 ports capable of driving two independent displays, a Gigabit Ethernet port, WiFi 5 or 6 connectivity, and more.   MeLE PCG02 Pro specifications: SoC (one or the other) Intel Celeron J4125 quad-core Gemini Lake Refresh processor @ 2.0 / 2.7 GHz (Boost) with 12EU Intel UHD 600 graphics @ 250 / 750 MHz; 10W TDP Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0 / 2.9 GHz (Boost) with 24EU Intel UHD 605 graphics @ 450 / 800 MHz; 10W TDP System Memory & Storage MeLE PCG02 Pro (J4125) 8GB LPDDR4-2133 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Andes unveils AndesCore AX65 Out-of-Order RISC-V core for compute intensive applications

Andes unveils AndesCore AX65 Out-of-Order RISC-V core for compute intensive applications

AndesCore AX60

Andes Technology has unveiled the high-end AndesCore AX60 series out-of-order 64-bit RISC-V processors at the Linley Fall Processor Conference 2022 with the new cores designed for compute-intensive applications such as advanced driver-assistance systems (ADAS), artificial intelligence, augmented/virtual reality, datacenter accelerators, 5G infrastructure, high-speed networking, and enterprise storage. AndesCore AX65 is the first member of the family and supports RISC-V scalar cryptography extension and bit manipulation extension. It is a 4-way superscalar core with Out-of-Order (OoO) execution in a 13-stage pipeline and can fetch 4 to 8 instructions per cycle. The company further explains the AX65 core then decodes, renames, and dispatches up to 4 instructions into 8 execution units, including 4 integer units, 2 full load/store units, and 2 floating-point units. The AX65’s memory subsystem also includes split 2-level TLBs (translation lookaside buffers) with up to 64 outstanding load/store instructions. Up to eight AX65 cores (or should that then be […]

Advertisement
Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Axiomtek iNA200 DIN-Rail cybersecurity gateway offers 6x Ethernet ports up to 2.5GbE

Axiomtek iNA200 DIN-Rail cybersecurity gateway offers 6x Ethernet ports up to 2.5GbE

Axiomtek iNA200 Gateway

Axiomtek iNA200 is a DIN-rail mountable cybersecurity gateway powered by a choice of Elkhart Lake Atom x6000E-series processor and designed for operational technology (OT) network security. The fanless gateway comes with up to 32GB RAM, supports SATA storage, offers 2.5GbE & Gigabit Ethernet (RJ45/SFP) networking, and as it is designed for industrial settings, can take input from two 9V to 36V power sources and operate in the -40°C to 70°C temperature range. Axiomtek iNA200 specifications: SoC – Intel Atom x6212RE/x6414RE dua-core or quad-core Elkhart Lake processor with 16 EU Intel UHD Graphics; TDP: x6212RE: 6W, x6414RE: 9W System Memory – Up to 32GB DDR4-3200 SO-DIMM Storage – Support for 2.5-inch SATA III SSD, optional eMMC flash Video Output – HDMI Networking 2x Gigabit Ethernet RJ45 ports via Marvell 88E1512 controller with LAN Bypass 2x 2.5GbE RJ45 ports via Intel I225-IT controller with LAN Bypass and TSN function 2x Gigabit Ethernet […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Learn soldering and programming with the Arduino Make Your UNO Kit

Learn soldering and programming with the Arduino Make Your UNO Kit

Arduino Make Your UNO Kit

Arduino Make Your UNO Kit is a kit with two boards, one for the microcontroller and the other for audio, and all components required that can be used to learn how to solder and then Arduino programming. Once soldering and assembly are complete you’ll hopefully get a working Arduino UNO and an audio synthesizer shield. But before you get there, you’ll need to equip yourself with a soldering iron and some soldering tin to solder the components below to the two PCBs. Package content: Arduino Make Your UNO board’s components Make Your UNO PCB Socket for ATMega328p MCU Microchip ATmega328p 8-bit AVR microcontroller USB Type-C serial adapter board Various 1k Ohm, 10k Ohm. and 1M Ohm resistors 3x Ceramic capacitors (22pF) 3x Electrolytic capacitors (47uF) 7x Polyester capacitors (100nF) 1x 1N4007 diode 1x 16MHz crystal 4x Yellow LEDs, 1x Green LED 1x Push-Button 1x MOSFET 2x I/O connectors 6-pin header […]

Posted on by Leo Zachary - 13 Comments on DongshanPI-D1s – An Allwinner D1s RISC-V development board designed to teach programming

DongshanPI-D1s – An Allwinner D1s RISC-V development board designed to teach programming

DongShanPI D1s

The DongshanPI-D1s development board is comprised of a soldered-on Allwinner D1s RISC-V system-on-module board (SoM) and a carrier board with two 40-pin headers and a 2.0mm dedicated header. This development board is specifically designed to teach programming with a focus on the RISC-V architecture. The development board was designed by 100ask. They previously designed the Dongshan NeZha STU a development board based on the Allwinner D1. The main difference between the two is that 100ask did not include the Ethernet and HDMI interfaces on the DongshanPI-D1s board. The pinout of the headers is also slightly different because they opted to make the headers compatible with the widely used 40-pin GPIO from Raspberry Pi single board computers. DongshanPI-D1s preliminary specifications: D1s Core Lite SoC – Allwinner D1s single-core XuanTie C906 64-bit RISC-V processor @ 1.0 GHz with with 32 KB I-cache + 32 KB D-cache Memory – 64 MB DDR2 (SIP) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on Quadric Chimera GPNPU IP combines NPU, DSP, and real-time CPU into one single programmable core

Quadric Chimera GPNPU IP combines NPU, DSP, and real-time CPU into one single programmable core

Quadric GPNPU

A typical chip for AI or ML inference would include an NPU, a DSP, a real-time CPU, plus some memory, an application processor, an ISP, and a few more IP blocks. Quadric Chimera GPNPU (general purpose neural processor unit) IP combines the NPU, DSP, and real-time CPU into one single programmable core. According to Quadric, the main benefit of such design is simplifying system-on-chip (SoC) hardware design and subsequent software programming once the chip is available thanks to a unified architecture for machine learning inference as well as pre-and-post processing. Since the core is programmable it should also be future-proof. Three “QB series” Chimera GPNPU cores are available: Chimera QB1 – 1 TOPS machine learning, 64 GOPS DSP capability Chimera QB4 – 4 TOPS ML, 256 GOPS DSP Chimera QB16 – 16 TOPS ML, 1 TOPS DSP Quadric says the Chimera cores can be used with any (modern) manufacturing process […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on SiFive P670 and P470 RISC-V processors feature RISC-V Vector Extensions

SiFive P670 and P470 RISC-V processors feature RISC-V Vector Extensions

SiFive Performance RISC-V processors Roadmap

SiFive has announced two new RISC-V Performance cores with the P670 and P470 processors with RISC-V Vector Extension for AI/ML, media and sensor processing, and designed for high volume applications such as wearables, smart home, industrial automation, AR/VR, and other consumer devices. The P670 is comparable to the Cortex-A78, and the P470 is comparable to the Cortex-A55. Both support the standardized RISC-V RVA22 profile for better OS compatibility and implement RISC-V Vector v1.0 and Vector Cryptography extensions. The SiFive Performance P470 and P670 share the following features: Full RISC-V RVA22 profile compliance Full, Out-of-Order, RISC-V Vector implementation, based on the ratified RISC-V Vector v1.0 Specification RISC-V Vector Cryptography extensions SiFive WorldGuard system security Support for virtualization, including a separate IOMMU for accelerating virtualized device IO Advanced Interrupt Architecture (AIA) compliant interrupt controller with better support for Message Signal Interrupts (MSI) and virtualization Enhanced scalability with fully coherent multi-core, multi-cluster, with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on System-on-module combines NXP i.MX 8M Mini Arm CPU and Xilinx Artix-7 FPGA

System-on-module combines NXP i.MX 8M Mini Arm CPU and Xilinx Artix-7 FPGA

NXP Arm + Xilinx FPGA development board

MYIR Tech has launched the MYC-JX8MMA7 system-on-module combining an NXP i.MX 8M Mini quad-core Arm Cortex-A53 processor with an AMD Xilinx XC7A25T Artix-7 FPGA. The 82 x 45mm CPU module comes with 2GB LPDDR4, 8GB eMMC flash, and 32MB QSPI Flash for the Arm processor and 256MB DDR3 and 32MB QSPI Flash for FPGA. It exposes I/Os through an MXM 3.0 edge connector and can operate in the industrial temperature range (-40 to 85°C). MYC-JX8MMA7 CPU module specifications: SoC – NXP i.MX 8M Mini with quad-core Cortex-A53 processor @ up to 1.6 (industrial) or 1.8 GHz, Cortex-M4F real-time core @ 400 MHz, Vivante GC320 and Vivante GCNanoUltra 3D/2D GPUs, 1080p60 H.265, H.264, VP8, VP9 video decoder, 1080p60 H.264 & VP8 video encoder FPGA – AMD Xilinx Artix-7 XC7A25T-2CSG325 with 23,360 logic cells, 3x GTP System Memory and Storage SoC – 2GB LPDDR4, 8GB eMMC flash, and 32MB QSPI Flash FPGA […]

Boardcon Rockchip and Allwinner SoM and SBC products