CNX Software - Embedded Systems News

November 17, 2022May 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Arduino Opta is a micro PLC for industrial IoT applications

Arduino has recently announced the Opta micro PLC with industrial IoT capabilities adding yet another solution to the Arduino Pro family. Arduino used to focus on the hobbyist crowd, but with the launch of the Arduino Pro family in 2020 starting with the Portenta H7 board, the company switched its main focus to the more profitable enterprise market. Since then they’ve launched several other boards designed in-house, and last year started collaborating with the introduction of the Arduino WisGate Edge LoRaWAN gateways based on RAKwireless hardware. The Arduino Opta is another one of those collaborations as it was designed together with Finder, who calls their devices PLR (Programmable Logic Relays). Arduino Opta key features and specifications: MCU – STMicroelectronics STM32H747XI microcontroller with 1x Arm Cortex-M7 core up to 480 MHz, 1x Arm Cortex-M4 core up to 240 MHz, 2MB flash, 1MB SRAM (as found in all Portenta H7 boards, and […]

November 16, 2022November 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

GOLE 1 R mini PC offers Rockchip RK3588 CPU, 5.5-inch touchscreen display

HIGOLE introduced the GOLE1 mini PC with a touchscreen display in 2015 mostly to get a free and legal Windows 10 license, but over the years the company launched more Intel models inspired by the original design. However, their latest model, the GOLE 1 R, is based on Rockchip RK3588 octa-core Arm Cortex-A76/A55 SoC instead and running Android 12 by default. The GOLE 1 R is equipped with 8GB RAM, 128GB eMMC flash, a 5.5-inch touchscreen display, Gigabit Ethernet and WiFi connectivity, a microphone, speaker, a gravity sensor, and a 2,500 mAh battery. The company also sells the GOLE 1 RN mini PC without a display, a microphone, a speaker, or a battery for power. GOLE 1 R/RN specifications: SoC – Rockchip RK3588 octa-core processor with four Cortex-A76 cores @ 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz, an Arm Mali-G610 MP4 GPU, a 6TOPS NPU, 8K 10-bit decoder, 8K […]

November 16, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Giveaway Week 2022 winners announced!

CNX Software’s Giveaway Week 2022 has just ended, and it’s time to announce the winners. Just like last year, some companies added to the review samples I offered with Rakwireless and ELECFREAKS offering a LoRaWAN devkit and an educational robot respectively. If you check out the photo of the items given away below you’ll find quite more than seven because the SONOFF NSPanel kit includes four Zigbee modules, and more importantly, we also organized a parallel giveaway week on CNX Software Thailand with small boards such as the Raspberry Pi Zero W or XIAO BLE. We had eight winners on CNX Software: NanoPi R5S gateway – Ingmar, GERMANY e-con Systems e-CAM20_CURB camera – Johnny, ESTONIA Pico:ed Smart Cutebot Kit – jednorozec, CZECH REPUBLIC Pico:ed V2 board – Leonardo, BRAZIL Sonoff NSPanel Pro and Zigbee modules – Tim, CANADA RAK Developer Kit (Air Quality Kit) – Magnus, SWEDEN GL.iNet GL-S10 BLE […]

November 16, 2022November 17, 2022 by Leo Zachary - 24 Comments

FNIRSI 1013D teardown and mini review – A portable oscilloscope based on Allwinner CPU & Anlogic FGPA

The FNIRSI 1013D is a dual-channel flat-panel oscilloscope with a rich set of features. It is cost-effective and useful to people in the maintenance and R&D industries. Although it has been on the market for a few years, I purchased one, and I decided to introduce it and disassemble it to check out the hardware design. FNIRSI describes its oscilloscope as “small and portable”, so I assume it should include a lithium battery, a TFT LCD screen, a processor to handle the display, and another chip to process the digital signals. Let’s take it apart first to find out. FNIRSI 1013D oscilloscope unboxing FNIRSI 1013D package content: 1x FNIRSI 1013D oscilloscope 2x 100MHz matching probes (1X and 10X) 1x USB cable 1x Charging adapter 1x Instruction manual The FNIRSI 1013D adopts a 7-inch 800 x 480 resolution color TFT LCD with a capacitive touch screen. There are two input channels […]

November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Partaker J6412 is a fanless network appliance/mini PC with 3x 2.5GbE, 3x video outputs

Elkhart Lake mini PC 2.5GbE HDMI DisplayPort

We wrote about the low-cost T8-Pro Celeron N5095 mini PC with three HDMI outputs and two Gigabit Ethernet ports last week, but if you’d prefer a model with 2.5GbE networking instead, the Partaker J6412 might be a better, albeit costlier option, with still three displays support (2xDP, 1xHDMI), and three 2.5GbE ports. As its name implies, the fanless mini PC/network appliance is powered by an Intel Celeron J6412 Elkhart Lake processor, coupled with up to 16GB DDR4 memory and a 512GB SSD, and it features six USB ports, plus an RS232 COM port. Partaker J6412 specifications: SoC – Intel Celeron J6412 quad-core Elkhart Lake processor @ 2.0 GHz / 2.6GHz (Burst frequency) with 1.5MB cache, 16 EU Intel UHD Graphics; 10W TDP System Memory – 4GB, 8GB, or 16GB DDR4-3200 via 1x SO-DIMM socket upgradeable up to 32GB Storage M.2 M-Key 2280 SATA socket 1x SATA III (6 Gb/s) port […]

November 15, 2022November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Matter compatible ESP-ZeroCode modules enable plug-and-play automation solutions

Espressif Systems has just announced the Matter-compatible ESP-ZeroCode modules with Wi-Fi and/or Thread (802.15.4) wireless connectivity that are designed as plug-and-play solutions for LED lights, outlets, switches, dimmers, relays, fans, and other lighting and electrical devices. I was only recently introduced to no-code programming in a recent post by Ninephon Kongangkab explaining how to use SenseCraft firmware for no-code programming on Wio Terminal. Basically, there’s no need to know Arduino, MicroPython, or any programming language, as the user just has to press a few buttons to configure an IoT device to meet his/her requirements. With the ESP-ZeroCode modules, Espressif offers something similar using several of their ESP32 chips. The first ESP-ZeroCode modules will be offered with either ESP32-C3 (aka ESP8685) or ESP32-C2 (aka ESP8684) WiFi & BLE RISC-V SoCs, or ESP32-H2 802.15.4 & BLE RISC-V microcontroller, and ships with a Matter compatible firmware that enables “near-zero investment in development”. Not […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AMD unveils low-cost Artix UltraScale+ AU7P FPGA and Zynq UltraScale+ ZU3T MPSoC

AMD UltraScale AU7P FPGA UltraScale ZU3T MPSoC

AMD has added two new low-cost, low-power members to its UltraScale+ family with the Artix UltraScale+ AU7P FPGA and the Zynq UltraScale+ ZU3T MPSoC. Both devices are manufactured with the 16nm FinFET process and offer entry points to the transceiver-based UltraScale+ family with features such as high I/O-to-logic density, UltraRAM, DSP, and more. AMD Artix UltraScale+ AU7P FPGA The new AU7P FPGA is the smallest from the Artix UltraScale+ family with four 12.5Gbps transceivers, up to 82K system logic cells, 216 DSP slices, 4.9 Mbit RAM, and 248 I/Os. It is offered in a 10.5 x 8.5mm InFO package. The company says the chip provides up to 50% lower static power, 20% more I/O-to-logic ratio, and twice as many 3.3V HDIO compared to the AU10P device. The AU7P is designed for space-constrained and/or power-sensitive applications such as medical imaging, machine vision, professional cameras/monitors, and automotive radar/lidar. More details may be […]

November 14, 2022November 14, 2022 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

This is what a 100 µAh micro-battery looks like

Electronic components have shrunk a lot over the year, but batteries are usually one of the larger items in a design. ITEN changes that with solid state lithium-ion micro-batteries in the shape of SMD components with up to 100 µAh capacity. This is clearly not going to power your next smartphone, but ITEM micro-batteries could be found in ultra-low-power sensors potentially replacing non-rechargeable coin cell batteries with much higher capacities (e,g. 100 mAh). ITEN says their solid-state micro-batteries are superior to coin cell batteries because those are polluting, difficult to assemble on PCB, costly to recycle and require periodic maintenance once a battery is depleted. In addition, some low-power embedded systems still require high current pulses for instance to drive RF transceivers or actuators leading hardware engineers to rely on oversized coin cell batteries as those can only deliver small currents. The carbon footprint of such batteries is claimed to […]

Boardcon Rockchip and Allwinner SoM and SBC products