Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Pinecil V2 Bluetooth LE soldering iron gets a web interface

Pinecil V2 Bluetooth LE soldering iron gets a web interface

Web interface Pinecil V2 soldering iron

It’s now possible to make use of the Pinecil V2 soldering iron‘s Bluetooth LE connectivity through a web-based interface used to monitor and/or set the temperature and power of the RISC-V soldering iron. When the Pinecil V2 soldering iron was launched with a Bouffalo Lab BL706 RISC-V Bluetooth microcontroller last summer, we were told there were main potential cases to make use of the Bluetooth LE features: OTA firmware upgrade and remote telemetry and control. The latter is now being taken care of by Joric who has written a  web application to visualize telemetry data and even control the temperature of the soldering iron. To be able to use the Bluetooth features, you’ll first need to install the latest Pinecil V2 firmware with blisp flashing utility before going to https://joric.github.io/pinecil to pair your soldering iron as explained in the wiki. Note the implementation relies on the Web Bluetooth API which […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on TopTon TP-X4F mini PC with four 2.5GbE ports features up to AMD Ryzen 7 5825U processor

TopTon TP-X4F mini PC with four 2.5GbE ports features up to AMD Ryzen 7 5825U processor

AMD Ryzen 4x 2.5GbE ports

TopTon TP-X4F is a mini PC and network appliance equipped with four 2.5GbE ports and powered by a choice of processors from the AMD Ryzen 5000U series up to the Ryzen 7 5825U octa-core-16-thread processor. The system supports up to 64GB RAM and up to five high-speed internal SATA or NVMe storage devices through M.2 sockets and SATA connectors and comes with three 4K display interfaces: HDMI, DisplayPort, and  USB-C, as well as four USB ports. TopTon TP-X4F specifications: SoC (one or the other) Ryzen 5 5600U hexa-core/12-thread processor @ 2.3 GHz / 4.2 GHz with Radeon Vega 7 graphics @ 1.8 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5800U octa-core/16-thread processor @ 1.9 GHz / 4.4 GHz with Radeon Vega 8 graphics @ 2.0 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5825U octa-core/16-thread processor @ 2.0 GHz / 4.5 GHz with Radeon Vega 8 graphics @ 2.0 GHz; TDP: […]

Advertisement
Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on OpenPLC open-source Programmable Logic Controller Suite works with Arduino, ESP8266/ESP32, Raspberry Pi, etc.

OpenPLC open-source Programmable Logic Controller Suite works with Arduino, ESP8266/ESP32, Raspberry Pi, etc.

OpenPLC Editor

OpenPLC is an open-source, free-to-use Programmable Logic Controller Suite, compliant with the IEC 61131-3 standard, and working with a range of hardware platforms such as Arduino, ESP8266/ESP32, Raspberry Pi SBCs, as well as Windows and Linux machines. When Arduino unveiled the Arduino PLC IDE, we noted the languages defined by the IEC 61131-3 standard were licensed, and the PLC key for the Portenta Machine Control unit sold for $17.60. One reader complained about the high license cost per device, but Massimo Banzi, the co-founder of the Arduino project, replied it was cost-effective for smaller deployments: Actually it’s not that much money compared to the cost of other PLC software (thousands of dollars per seat!). This model helps small companies with not that many devices.. It’s possible to negotiate bulk licenses for companies. But there’s also another option with OpenPLC open-source PLC suite that does not require any license fee. That’s […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on TOOCA Laser L1 review – An affordable 5W laser engraver

TOOCA Laser L1 review – An affordable 5W laser engraver

TOOCA Laser L1 review

ELECFREAKS’ TOOCA Laser L1 is an affordable 5W laser engraver with a sturdy yet lightweight structure and that can engrave various materials including metals. It’s easy to use with a one-button press and suitable for education in schools. TOOCA Laser L1 laser engraver unboxing The laser engraver comes as a kit with components that can be easily assembled. It was well-packed with little risk of being damaged during transport. It also includes tools and instructions for assembly, and you don’t need any extra tools to complete the assembly. TOOCA Laser L1 specifications The machine measures 568x632x198 mm, weighs 3.2 kg only so it can easily be carried around, and offers a 400×415 mm working area. It works with Windows and macOS and only requires 24V power available through the provided power adapter. A wide range of file types are supported, and the device can engrave many types of materials and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on LapPi 2.0 – A DIY laptop for Raspberry Pi 4 and other single board computers (Crowdfunding)

LapPi 2.0 – A DIY laptop for Raspberry Pi 4 and other single board computers (Crowdfunding)

LapPi 2.0 DIY Raspberry Pi laptop

The LapPi 2.0 is a DIY laptop kit with an acrylic enclosure, a UPS HAT with a 18650 battery holder, and off-the-shelf parts including speakers, a touchscreen display, a Raspberry Pi camera, and a wireless keyboard that’s suitable for the Raspberry Pi 4 and pretty much any other small single board computer from Radxa, Orange Pi, Banana Pi, FriendlyElec, Hardkernel, and others. We’ve seen several Raspberry Pi laptops over the years with the CrowPi L and Pi-Top, and I have to say the LapPi 2.0 is not the most eye-pleasing or sophisticated design, but at least, it’s versatile and not limited to the Raspberry Pi family. LapPi 2.0 kit content and highlights: Display – 7-inch 5-point capacitive touchscreen IPS display with 1024×600 resolution support for audio output via 3.5mm audio jack and 4-pin header Camera – Official 8MP Raspberry Pi Noir camera with night vision support Audio – 2x 5W/8 […]

Posted on by Sponsored Post - 2 Comments on Elephant Robotics Christmas 2022 sales (Sponsored)

Elephant Robotics Christmas 2022 sales (Sponsored)

Elephant Robotics Chritmas 2022 Sales

Elephant Robotics is back with another promotional event for Christmas 2022 selling educational robotic kits and toys with up to a $400 discount until December 26, 2022. The highest discount is for the Raspberry Pi 3-powered MarsCat selling for $999, or $400 less than the original price tag of $1,399, but the company also offers an $80 discount for all robotic arms from the company including the myCobot and mechArm robotic arms, myBuddy dual arm system, and myPalletizer compact 4-axis robotic arm,  as well as the myAGV four-wheel drive vehicle. If you use the coupon code Xmas, you’ll get a $50 on the metaCat robotic plush toy / smart cat. Finally, all orders over $3,000 qualify for free shipping with the FREESHIP3000 coupon code. The exact same promotions are available on the Elephant Robotics’ Amazon store. If you prefer doing your shopping on Aliexpress instead, Elephants Robotics has more Chrismas […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on SpinQ quantum computers target the education market

SpinQ quantum computers target the education market

SpinQ Gemini Mini quantum computer

Quantum computing promise a leap in the performance of applications relying upon parallelism using the properties of quantum physics like superposition, interference, and entanglement to perform computation instead of flipping “0” and “1” like traditional transistors. It will be used in scientific simulations, cryptography, machine learning, computational biology, and more. So far, I had seen massive quantum computers in research labs, but companies like Intel and IBM are working on providing quantum processors with hundreds and thousands of qubits that should eventually be found in supercomputers. It’s unclear to me whether we’ll ever see “quantum accelerators” in embedded processors, and in any case, it would be many years away. But if you are interested in better understanding the technology and playing around with quantum computing, SpinQ is selling 2-qubit and 3-qubit quantum computers for the education market: Gemini Mini, Gemini, and Triangulum. Gemini Mini quantum computer Specifications: Number of qubits: […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on PineTab2 Linux tablet to feature Rockchip RK3566 SoC, up to 8GB RAM, 128GB eMMC flash

PineTab2 Linux tablet to feature Rockchip RK3566 SoC, up to 8GB RAM, 128GB eMMC flash

Pinetab2

The PineTab2 is an upcoming 10.1-inch Linux tablet based on the 1.8 GHz Rockchip RK3566 quad-core Cortex-A55 processor and equipped with up to 8GB RAM and 128GB eMMC flash. The new model is a clear step-up compared to the Allwinner A64-based PineTab which did not survive the supply shortage and has also gone through a complete physical redesign with a modular metal chassis that is easy to disassemble for upgrades and change parts such as the eMMC module, camera module,  battery, or even the display. PineTab2 preliminary specifications: SoC – SoC – Rockchip RK3566 quad-core Arm Cortex-A55 @ up to 1.8 GHz with ARM Mali-G52 2EE GPU supporting OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU System & Storage Option 1 – 4GB RAM, 64GB eMMC flash module Option 2 – 8GB RAM, 128GB eMMC flash module MicroSD card slot Display – 10.1-inch IPS display (other details TBC) […]

Boardcon Rockchip and Allwinner SoM and SBC products