Posted on

Tis the season so they say

Hey Karl here with a short post…I know everyone on here has their hobbies and thanks to Jean-Luc, and Gearbest I have been able to explore 3D printing for nearly 2 years. I want to express gratitude towards 3 extremely active individuals who help 3D printing, and donate a lot of their time.  They help and rarely get showcased on their own. Thinkyhead aka Scott Lahteine You may not know Scott but I’m sure his code is in your 3D printer. Over the past two years I’ve opened a couple issues on Marlin on the Github page and he has helped out both times. I’m writing this today to encourage everyone to contribute to Scott’s Patreon. Marlin is at the cusp of releasing 2.0 which brings a lot a change and a lot of work. One thing that all the printers I have reviewed have in common is Marlin firmware. […]

Posted on

An Attempt to Benchmark Entry-level x86 Boards against RK3399 & Exynos Arm Boards

Some Arm boards have become quite powerful, while hardware based on low power Intel processor has generally become cheaper with both architectures somewhat converging in terms of performance and price. Piotr Maliński got interested and purchased some low cost (<$150) Intel hardware to compare to mid-range Arm boards, throwing a Raspberry Pi 3 B+ into the mix as well for comparison. Those are the Intel test boards / computers: Qotom motherboard with Intel Atom Z3735F Bay Trail processor, 2GB RAM, 32GB flash – $74 + shipping on Aliexpress Piesia nano ITX board with Intel Celeron N2806 Bay Trail processor, DDR3 SO-DIMM socket, SATA / mSATA interfaces – Piotr found it for around $85 on Aliexpress, but the price now jumped to over $150 plus shipping, which does not make it very attractive Generic thin mini ITX motherboard based on Celeron N3160 “Braswell” processor, DDR3 SO-DIMM socket, SATA / mSATA interfaces. $62.68 […]

Khadas Edge2 Arm mini PC
Posted on

Intel Neural Compute Stick 2 with Myriad X VPU Finally Announced

Intel Neural Compute Stick was first introduced in early 2017 as a USB compute that allows AI inference at the edge with low power consumption. The stick is based on Myriad Movidius 2 VPU (Vision Processing Unit), and was found to significantly improve inference performance on Raspberry Pi 3 board over a proprietary GPU accelerated solution. However, a little later last year, Intel also announced Movidius Myriad X VPU with claims of up to 10 times DNN performance over Myriad 2 VPU. But so far, we would only see solutions launched with the latter, and it looks like Intel is finally ready to bring Myriad X VPU to the market with the company announcing Intel Neural Compute Stick 2 at Intel’s artificial intelligence (AI) developer conference in Beijing taking place on November 14 and 15. Intel NCS 2 (Neural Compute Stick 2) specifications: Processor – Intel Movidius Myriad X Vision Processing […]

Posted on

Giveaway Week Winners – November 2018

We just had a week of fun on CNX Software with our yearly “Giveaway Week” activity where 7 prizes – from development boards to Raspberry Pi add-on boards or solar chargers – were randomly given away to people who entered by leaving a comment. The winners are in, with Asia starting strong, but Europe quickly taking the lead, and the US ending up the giveaway with a great (again) finish. Here’s the full list of winners: Videostrong VS-RD-RK3399 development board – Việt trần, VIETNAM CHOETECH Solar Charger – Erki, ESTONIA ESP32-LyraTD-MSC audio mic HDK – Ron, The Netherlands ROC-RK3328-CC development board – Dainis, LATVIA (a second time winner having previously won during Giveaway Week 2016) ThaiEasyElec 3G GPS Raspberry Pi Hat – zmlopez, SPAIN ANAVI Infrared and RGB strip pHAT – Joe, USA NanoPC-T4 development board – Jeffrey, USA I’ve just send all 7 packages earlier this afternoon. Hopefully, the […]

Posted on

Giveaway Week – ANAVI Infrared pHat + Light pHat Starter Kit

Leon ANAVI works as a software engineer, but designs some open source hardware boards as a hobby, and usually sends me his creations for review. That means I have a bunch of his products, and today I’ll be giving away ANAVI Light pHat Starter Kit, and ANAVI Infrared pHat. The light sensor in the kit above will not be included, since I have no idea where it is… The winner still get the board and RGB LED string, and a few stickers. After connecting to a Raspberry Pi board and adding a 12V power supply, you’ll be able to control the LED as I did in “Getting Started with ANAVI Light pHat Starter Kit with RGB LED Strip, Light Sensor“. ANAVI Infrared pHat will also be part of the winning package, and you may consider reading the instructions showing how to control an air conditioner with a Raspberry Pi board. […]

Posted on

96Boards AI Sophon Edge Developer Board Features Bitmain BM1880 ASIC SoC

Bitmain, a company specializing in cryptocurrency, blockchain, and artificial intelligence (AI) application, has just joined Linaro, and announced the first 96Boards AI platform featuring an ASIC: Sophon BM1880 Edge Development Board, often just referred to as “Sophon Edge”. The board conforms to the 96Boards CE specification, and include two Arm Cortex-A53 cores, a Bitmain Sophon Edge TPU delivering 1 TOPS performance on 8-bit integer operations, USB 3.0 and gigabit Ethernet. Sophon Edge specifications: SoC ASIC – Sophon BM1880 dual core Cortex-A53 processor @ 1.5 GHz, single core RISC-V processor @ 1 GHz, 2MB on-chip RAM, and a TPU (Tensor Processing Unit) that can provide 1TOPS for INT8,and up to 2 TOPs by enabling Winograd convolution acceleration System Memory – 1GB LPDDR4 @ 3200Mhz Storage – 8GB eMMC flash + micro SD card slot Video Processing – H.264 decoder, MJPEG encoder/decoder, 1x 1080p @ 60fps or 2x 1080p @ 30fps H.264 decoder, […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Giveaway Week – Libre Computer ROC-RK3328-CC Board

What will be the prize on the fourth day of this year’s giveaway week? Libre Computer ROC-RK3328-CC, a development board based on Rockchip RK3328 processor and mostly following Raspberry Pi 3 form factor. When I reviewed the board with Debian 9 last summer, I was mostly reminded how important fast storage and proper power supply were important. I had some kernel panic when using slow storage (micro SD card), but when I switch to the eMMC flash stability improved a lot. I also had some troubles with my USB 3.0 hard drive, but switching from a 5V/2A power supply to a 5V/2.5A power adapter solved most of my problems. Once I had “solved” those two issues the board worked fairly well, and Libre Computer always aims for mainline Linux support on their board, so that’s an advantage to take into consideration. The kit offered includes the board and heatsink, so […]

Posted on

Linux 4.19 Release – Main Changes, Arm and MIPS Architectures

With Linus Torvalds taking a leave from the Linux kernel project, Greg Kroah-Hartman was the one to release Linux 4.19 last Sunday: Hi everyone! It’s been a long strange journey for this kernel release… While it was not the largest kernel release every by number of commits, it was larger than the last 3 releases, which is a non-trivial thing to do. After the original -rc1 bumps, things settled down on the code side and it looks like stuff came nicely together to make a solid kernel for everyone to use for a while. And given that this is going to be one of the “Long Term” kernels I end up maintaining for a few years, that’s good news for everyone. A small trickle of good bugfixes came in this week, showing that waiting an extra week was a wise choice. However odds are that linux-next is just bursting so […]

Khadas VIM4 SBC