CNX Software - Embedded Systems News

April 26, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

AMD Ryzen Z1 “Zen4” processors target Windows-based handheld gaming consoles

AMD has just unveiled the new power-efficient Ryzen Z1 “Zen4” Series processor family designed for handheld gaming consoles running Windows and equipped with AMD RDNA 3 architecture-based graphics. The new series features two processors at launch, namely the Ryzen Z1 hexa-core processor with 4 RDNA 3 Compute Units and the Ryzen Z1 Extreme octa-core processor with 12 RDNA 3 Computer Units for “ultimate high-performance for handheld gaming”. Highlights of Ryzen Z1 and Z1 extreme specifications: Both processors support LPDDR5/LPDDR5x memory, and USB4 interface, as well as the following AMD technologies: AMD Link – Mobile app to connect your phone, tablet, TV, or Windows-based PC, and stream games. AMD Radeon Super Resolution – In-driver feature upscaling lower resolutions set in-game to the native resolution of the active display for higher FPS performance. AMD Radeon Boost – Dynamically lowers the resolution of the entire frame when fast on-screen character motion is detected […]

April 25, 2023April 25, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Sonatino – A Raspberry Pi Zero-sized ESP32-S3 audio board

Lumination Labs’ Sonatino is an ESP32-S3 board designed for audio applications that follows the Raspberry Pi Zero dimensions so that it can be used with some of the cases designed for the Raspberry Pi Zero. The wireless audio board features Cirrus Logic WM8524 audio DAC and WM8782 audio DAC capable of 24-bit 192kHz stereo output and mono input respectively, a speaker amplifier and two pins for speaker connection, a 3.5mm audio jack, as well as a microSD card slot for the storage of audio or other data. Sonatino specifications: Wireless Module – ESP32-S3-WROOM-1 with SoC – ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning Memory – 2MB PSRAM Storage – 16MB flash Connectivity – WiFi 4 and Bluetooth 5 LE/Mesh Storage – MicroSD card slot (SPI) Audio 3.5mm audio jack supporting input and output (TRRS, CTIA standard) Speaker connection: onboard pins, optional screw […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

April 25, 2023April 28, 2023 by Sponsored Post - No Comments

Buy Arylic smart audio equipment up to 20% off during Mother’s Day sale (Sponsored)

Arylic has just launched a Mother’s Day sale for their smart audio equipment where you can get up to a 20% discount with coupon mother20 on specific products namely Up2Stream Amp Sub multiroom wireless subwoofer amplifier board, SA100 50W wall-mounted amplifier, WBC65 multiroom wireless ceiling speaker, and the new Arylic BK501/BK651 2-way bookshelf speakers that were introduced last month. The company also offers up to 15% off with the coupon mother15 on a wider range of Smart Audio products that include the S10 WiFi music stream, Arylic A30+ 30W WiFi mini stereo amplifier, Arylic A50+ streaming amplifier (See Arylic S50+ review for details), and the Qualcomm QCC3350-based B50 Bluetooth stereo amplifier with a built-in audio transmitter. Other discounted smart audio products that qualify for the 15% discount part of the Mother’s Day sale include several Up2Stream boards for DIY connected speakers, Arylic S50+ pre-amplifier, and various speakers. Arylic products ship […]

April 25, 2023April 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Fanless mini PC features up to Core i3-N305 Alder Lake-N processor

AAEON’s UP Squared Pro 7000 Edge fanless mini PC is powered by a choice of Alder Lake-N SoCs from the Processor N50 up to the Intel Core i3-N305 octa-core processor and designed for IoT, automation, robotics, and industrial applications. The system is based on the UP Squared Pro 7000 4-inch SBC and ships up to 16GB LPDDR5, up to 64GB eMMC flash, and supports triple display setups with HDMI, DisplayPort, and USB-C ports. Network connectivity includes two 2.5GbE ports and optional WiFi/Bluetooth and/or 5G/4G cellular modules M.2 expansion slots. UP Squared Pro 7000 Edge mini PC specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor up to 3.8 GHz with 6MB cache, 32EU Intel UHD Graphics Gen 12 @ 1.25 GHz; TDP: 15W Intel Atom x7425E quad-core processor up to 3.4 GHz with 6MB cache, 24EU Intel UHD Graphics Gen 12 @ 1.0 GHz; TDP: 12W […]

April 24, 2023April 25, 2023 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

ASUSTOR FLASHSTOR NAS supports up to 12 M.2 SSDs, 10GbE networking

ASUSTOR FLASHSTOR 6 and FLASHSTOR 12 are network access storage (NAS) devices powered by a quad-core Intel Celeron N5095 Jasper Lake processor and designed for respectively 4K audio and video content consumption for the former and 4K video editing for the latter. Both models come with 4 GB of DDR4-2933, two USB 3.2 Gen 2×1 ports, and HDMI 2.0b video output, but the FLASHSTOR 6 supports up to 6 M.2 NVMe SSDs and 2.5GbE networking, while the FLASHSTOR 12 can take up to 12 M.2 NVMe SSDs and handles 10GbE networking. ASUSTOR FLASHSTOR specifications: SoC – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0 GHz / 2.9 GHz (Turbo) System Memory – 4GB SO-DIMM DDR4, expandable up to 16GB via 2x SO-DIMM slots Storage 8GB eMMC flash for the OS FLASHSTOR 6 (FS6706T) – 6x M.2 2280 NVMe drive slots, up to 14x drives with AS6004U expansion unit for […]

April 24, 2023April 25, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

EmbedFire LubanCat is a Rockchip RK3566/RK3568 SBC family with Raspberry Pi Zero/Model B, and other form factors

As I checked out Linux 6.3 changelog earlier this morning, I noticed the EmbedFire LubanCat 2 SBC in the Rockchip section, and having never heard of the EmbedFire company or LubanCat single board computers, I decided to have a closer look. EmbedFire is a company based in China, more exactly in DongGuan, that makes a range of LubanCat single board computers based on Rockchip RK3566 or RK3568 processors, some of which partially follow Raspberry Pi Zero or Raspberry Pi 3/4 Model B form factors, while others come with custom designs. LubanCat 2 SBC specifications: SoC – Rockchip RK3568 quad-core Arm Cortex-A55 @ up to 2.0 GHz with ARM Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU System Memory – 1GB, 2GB, 4GB, or 8GB LPDDR4/LPDDR4X @ 1560 MHz Storage 8GB, 16GB, 32GB, 64GB or 128GB eMMC flash M.2 M-key socket (PCIe 3.0 […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs

April 24, 2023April 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 6.3 release – Notable changes, Arm, RISC-V and MIPS architectures

Linux Torvalds has just announced the release of Linux 6.3 on the Linux Kernel Mailing List (LKML): It’s been a calm release this time around, and the last week was really no different. So here we are, right on schedule, with the 6.3 release out and ready for your enjoyment. That doesn’t mean that something nasty couldn’t have been lurking all these weeks, of course, but let’s just take things at face value and hope it all means that everything is fine, and it really was a nice controlled release cycle. It happens. This also obviously means the merge window for 6.4 will open tomorrow. I already have two dozen pull requests waiting for me to start doing my pulls, and I appreciate it. I expect I’ll have even more when I wake up tomorrow. But in the meantime, let’s enjoy (and test) the 6.3 release. As always, the shortlog […]

April 23, 2023April 23, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Makeblock Ultimate 2.0 review – A multi-function 10-in-1 educational robot kit

Makeblock Ultimate 2.0 is an educational robot kit that can be used to easily create up to 10 different types of robots. An Arduino-compatible Mega 2560 MCU board serves as the main controller and there are over 550 mechanical parts and electronic modules. The robot can drive up to 4 encoder and stepping motors, control up to 10 servo motors to work simultaneously, and can also be connected to Arduino and Raspberry Pi boards for more complex projects. The review/tutorial is fairly long, so if you are short on time, you can jump to different sections by clicking on some of the links below: MegaPi control board and main modules description mBlock 5 visual-programming IDE installation Programming of DC Encoder motors, Ultrasonic sensor, Line follower module, motion sensor, RJ25 adapter, and shutter module mBlock mobile app Building the ten models for the Makeblock Ultimate 2.0 robot kit (as shown in […]