Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on SONOFF SNZB-02D review – A Zigbee temperature & humidity sensor with a 2.5-inch display

SONOFF SNZB-02D review – A Zigbee temperature & humidity sensor with a 2.5-inch display

Sonoff SNZB-02D review

We’ve previously tested the SNZB-02 Zigbee temperature and humidity sensor with the SONOFF NSPanel Pro smart panel, but ITEAD has now launched the SONOFF SNZB-02D that integrated the same features plus a 2.5-inch display to visualize the data. They’ve sent us a SNZB-02 sample for review, so after listing the specifications we’ll test SONOFF’s latest Zigbee sensor with Home Assistant. SONOFF SNZB-02D specifications Display – 2.5-inch black&white display Connectivity – Zigbee 3.0 Sensors Temperature sensor with -9.9°C to 60°C range, ±0.2°C accuracy Humidity sensor with 5%—95%RH range, ±2%RH accuracy Battery – 3V CR2450 coin-cell battery good for about 2 years with a 5-second polling rate Dimensions – 62.5 x 59.5 x 18.5mm Material – PC Color: White Unboxing and first try We’ll find the sensor in the usual orange package used for Zigbee devices. The SNZB-02D sensor comes with a quick start guide and a pre-installed battery. Just pull the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on PicoVNA 5 software for vector network analyzers supports Windows, Linux, MacOS, and Raspberry Pi

PicoVNA 5 software for vector network analyzers supports Windows, Linux, MacOS, and Raspberry Pi

PicoVNA 108 vector network analyzer

Pico Technology has released PicoVNA 5 control software for their vector network analyzers for Windows x86 64-bit, Mac, Linux x86 64-bit, and Raspberry Pi 3 and greater single board computers, superseding the Windows-only PicoVNA 3 software. As a Ubuntu user, I hate it when some hardware tool forces me to install software on Windows when there’s no Linux alternative, so any company that provides cross-platform tools is making the right move. I’m also not quite sure what a “vector network analyzer” (VNA) is, so I’ll first look into the PicoVNA 106 and PicoVNA 108 6/8.5 GHz VNAs from the company. PicoVNA 106/108 vector network analyzers highlights and specifications: Frequency ranges PicoVNA 106 – 300 kHz to 6 GHz PicoVNA 108 – 300 kHz to 8.5 GHz Up to 5500 dual-port S-parameters per second > 10 000 S11 + S21 per second Quad RX four-receiver architecture Up to 124 dB dynamic […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Banana Pi BPI-W3 SBC features Rockchip RK3588 SoM, M.2 NVMe socket, 2.5GbE, HDMI output and input

Banana Pi BPI-W3 SBC features Rockchip RK3588 SoM, M.2 NVMe socket, 2.5GbE, HDMI output and input

Banana Pi BPI-W3

Banana Pi BPI-W3 is another Rockchip RK3588 SBC (single board computer) with 8GB RAM, 32GB eMMC flash, an M.2 NVMe socket, 2.5GbE networking, two HDMI 2.1 output ports, one HDMI 2.0 input port, and other features. We first recovered the board last summer, but at the time the RK3588 SBC came with a PCIe x4 slot and dual Gigabit Ethernet, and the company has now redesigned the board without either using instead a Rockchip RK3588 system-on-module as part of the design and implemented 2.5GbE and M.2 NVMe SSD support with the available PCIe interfaces. Banana Pi BPI-W3 specifications: SoM – BPI-RK3588 core board SoC- Rockchip RK3588 octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ 1.8 GHz, an Arm Mali G610MC4 GPU, a 6 TOPS NPU, 8Kp60 H.265/VP9/AVS2 10-bit decoder, 8Kp30 H.265/H.264 encoder System Memory – 8GB LPDDR4 (options for 4GB to 32GB) Storage […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on $60 M5Stack CoreS3 ESP32-S3 IoT controller comes with 2-inch display, VGA camera, multiple sensors

$60 M5Stack CoreS3 ESP32-S3 IoT controller comes with 2-inch display, VGA camera, multiple sensors

M5Stack CoreS3 ESP32-S3 IoT controller

M5Stack CoreS3 is a battery-powered ESP32-S3 IoT controller with WiFi and Bluetooth connectivity, a 2-inch touchscreen display, a 0.3MP camera, a microSD card slot for storage, several sensors, plenty of I/Os, a USB Type-C OTG port, as well as a 9V to 24V DC input port. That’s the second ESP32-S3 IoT controller from M5Stack we’ve seen this year, as the CoreS3 follows the smaller M5Stack AtomS3 with a 0.85-inch display, only a few I/Os, and fewer features overall although it does come with an IR transmitter that’s missing from the larger CoreS3. M5Stack CoreS3 specifications: Wireless MCU – Espressif Systems ESP32-S3FN16R8 dual-core 32-bit Xtensa LX7 microcontroller with AI vector instructions up to 240MHz, RISC-V ULP co-processor, 512KB SRAM, 2.4GHz WiFi 4 (802.11b/g/n), Bluetooth 5.0 BLE + Mesh, 16MB flash, 8MB PSRAM Antenna – Internal “3D” antenna Storage – MicroSD card slot Display – 2-inch display with 320×240 resolution via ILI9342C […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Creality Ender-3 S1 Pro review – Part 2: Engraving and 3D printing

Creality Ender-3 S1 Pro review – Part 2: Engraving and 3D printing

Creality Ender 3 S1 Pro 3D Printer laser Engraver

Earlier this year, I received the Creality Ender-3 S1 Pro 2-in-1 3D printer & laser engraver and in the first part of the review, I showed the package content and how to assemble the system either to use it as a 3D printer or a laser engraver, but didn’t start it at the time. I’ve now had time to play with both laser engraving (less luck with cutting) and 3D printing, so I’ll report my experience in the second part of the review. Creality Ender-3 S1 Pro laser engraving Since in the last part of the review I had the 10W laser module installed on the 3D printer, I decided to start the testing with laser engraving and cutting. Contrary to the TwoTrees TS2 laser engraver I reviewed last year, the Creality Ender-3D S1 Pro laser engraving kit does not support autofocus, so I used the provided multi-level fixed-focus bar […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on Orange Pi is working on a portable gaming console with Rockchip RK3588S or AMD Ryzen 7 CPU

Orange Pi is working on a portable gaming console with Rockchip RK3588S or AMD Ryzen 7 CPU

Orange Pi Portable Game Console

Single board computer manufacturer Orange Pi Ltd is working on a portable gaming console that will come with either a Rockchip RK3588S processor for Android/Linux gaming, or AMD Ryzen 7 7800U/6800U for Windows gaming. The industrial design looks to be the same for all models with a 7-inch touchscreen display, a D-Pad, two joysticks, XBOX-styled ABXY buttons, two customisable buttons on the back, two microphones, stereo speakers, three USB ports including one only for charging, The Orange Pi portable gaming console will be offered in three variants when it launches in China in October during Golden Week: AMD Ryzen 7 7840U processor with 16GB RAM, 512GB storage running Windows 11 for an early bird price of 3,000 RMB ($434 US), or a regular price of 3,499 RMB ($506). AMD Ryzen 7 6800U with Windows 11 selling for 2,000 RMB, or about $289 US (early bird price). Rockchip RK3588S octa-core Arm […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs
Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on GL.iNet Spitz AX (GL-X3000NR) 5G NR WiFi 6 router review – Part 1: Specs, unboxing, and first boot

GL.iNet Spitz AX (GL-X3000NR) 5G NR WiFi 6 router review – Part 1: Specs, unboxing, and first boot

GL-X3000NR 5G NR WiFi 6 router review

GL.iNet Spitz AX, also known as GL-X3000NR, is a compact 5G NR WiFi 6 router running OpenWrt 21.02 on a MediaTek Filogic 820 (TM7981A) dual-core Cortex-A53 processor coupled with 512MB DDR4 and 8GB eMMC flash, as well 2.5GbE and GbE interfaces, and a USB 2.0 port. The company sent us a Spitz AX router for evaluation, and in the first part of the review, we’ll go through the specifications, and do an unboxing and a teardown, before connecting it for a first boot. GL.iNet Spitz AX router specifications SoC – MediaTek MT7981A (Filogic 820) dual-core Arm Cortex-A53 processor @ 1.3 GHz System Memory – 512 MB DDR4 Storage – 8GB eMMC flash, MicroSD card slot up 1+ TB Networking 1x 2.5GbE WAN Ethernet port 1x Gigabit Ethernet LAN port Dual-band IEEE 802.11a/b/g/n/ac/ax WiFi 6 up to 574Mbps (2.4GHz), 2402Mbps (5GHz) RM520N-GL 5G cellular modem and 2x Nano SIM card slots […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on Cologne GateMate A1 FPGA chip with 20,480 LE is programmable with an open-source toolchain

Cologne GateMate A1 FPGA chip with 20,480 LE is programmable with an open-source toolchain

GateMate A1 FPGA development board

Cologne Chip GateMate A1 is an FPGA with 20,480 logic elements best suited for lower-power applications and programmable with an open-source toolchain based on nMigen, Yosys, and other open-source tools. The A1 FPGA also comes with 1,280 Kbit block SRAM, four PLLs, a quad SPI interface up to 100 MHz, a 5Gbps SerDes interface, and the company offers an evaluation board to get started with development. GateMate A1 specifications: CPE Architecture 20,480 programmable elements (CPE) for combinatorial and sequential logic 40,960 Latches / Flip-Flops within programmable elements CPE consists of LUT-tree with 8 inputs Each CPE is configurable as a 2-bit full-adder or 2×2-bit multipliers Features 4x programmable PLLs quad SPI interface up to 100 MHz 1,280 Kbit dual-ported block RAM with variable data widths in 32 x 40 Kbit RAM cells Multipliers with arbitrary size implementable in CPE array Multiple clocking schemas All 162 GPIOs are configurable as single-ended […]

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...