Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rongpin DR4-S905/DR4-A311D SoM features Amlogic S905D3 or A311D processor

Rongpin DR4-S905/DR4-A311D SoM features Amlogic S905D3 or A311D processor

DR4-A311D Amlogic A311D system-on-module

Shenzhen Rongpin Electronic Technology (Rongpin) DR4-S905 and DR4-A311D are SO-DIMM system-on-modules (SoM) respectively powered by Amlogic S905D3 quad-core Cortex-A55 processor and Amlogic A311D octa-core Cortex-A73/A53 processor. The modules come with 2GB LPDDR4 and 16GB eMMC flash by default, but can be ordered with up to 4GB RAM and 128GB storage, and the company offered a feature-rich carrier board to test all interfaces provided but the system-on-modules. DR4-S905 system-on-module specifications: SoC – Amlogic S905D3 quad-core Cortex-A55 processor @ 1.9GHz with Arm Mali-G31MP2 GPU up to 800MHz supporting OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0, real-time Cortex-M4 core for always-on processing, and 1.2 TOPS NPU System Memory – 2GB LPDDR4 by default (1GB/4GB options) Storage – 16GB eMMC 5.1 flash by default (8GB, 32GB, 64GB, 128GB options) SO-DIMM edge connector for connection to a carrier board Power management – Discrete design Dimensions – 69.6 x 30mm Temperature Range – -25℃ to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on KOKONI SOTA 3D printer handles 600mm/s prints, 7-color printing (Crowdfunding)

KOKONI SOTA 3D printer handles 600mm/s prints, 7-color printing (Crowdfunding)

KOKONI SOTA 3D printer

KOKONI SOTA 3D printer with an inverted design (the printing head is under the hotbed) that supports printing speeds of up to 600mm/s, as well as 7-color printing through a filament tower adding support for 5 extra filament rolls. The upside-down design was made to move motors and rails to the bottom base of the printer to lower the center of gravity and help improve stability, reduce the vibration to virtually nothing, and enable the faster printing speed. KOKONI also says the SOTA 3D printer offers 0.1mm accuracy thanks to AI radar detection and error compensation and operates relatively silently at 30dB one meter from the 3D printer. KOKONI SOTA specifications: Printing size – 200 x 200 x 200 mm XY axis – Linear rail Z-axis SOTA Lite – Lead screw SOTA – High-precision ball screws Drive motor SOTA Lite – high-speed stepper motor SOTA – Closed-loop motor with magnetic […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Sponsored Post - 2 Comments on Try ALLPCB PCB manufacturing services for just $1 (Sponsored)

Try ALLPCB PCB manufacturing services for just $1 (Sponsored)

AllPCB PCB manufacturing services

ALLPCB is a PCB manufacturer founded in Hangzhou in 2015 that has built up a super Electronic Collaborative Manufacturing Service system (ECMS) covering PCB, SMT, Electronic components, and other fields. The company has now launched a promotion to lets hardware designers try out its services for only $1 for up to five pieces of 6-layer PCBs not exceeding 150x100mm in size. The company now has more than 170,000 customers from over 160 countries and processes 5,000 files daily with a 99.15% on-time delivery rate. ALLPCB serves customers in a wide range of sectors that cover consumer electronics, communication equipment, Industrial Control (ISC), electronic instruments and apparatus, intelligent hardware, Internet of Things (IoT) applications, Industry 4.0 solutions, and many more. If you want to give ALLPCB service a try for $1, go to the ordering page, select the number of layers and dimensions within the boundaries of the promotion, and click […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 50 Comments on NanoPC-T6 Arm Linux SBC offers dual 2.5GbE, HDMI 2.1 outputs, HDMI 2.0 input, 2x M.2 sockets, and more

NanoPC-T6 Arm Linux SBC offers dual 2.5GbE, HDMI 2.1 outputs, HDMI 2.0 input, 2x M.2 sockets, and more

NanoPC-T6

FriendlyELEC NanoPC-T6 is a feature-rich Rockchip RK3588 SBC with up to 16GB LPDDR4X RAM, 256GB eMMC flash, two HDMI 2.1 output ports, one HDMI 2.0 input port, dual 2.5GbE, two M.2 PCIe socket for storage or wireless, a mini PCIe socket and microSIM slot for 4G LTE connectivity, and more. The new NanoPC-T6 single board computer offered many more interfaces than the recent NanoPi R6S or R6C board based on the Rockchip RK3588S with fewer I/Os. As such, it would be suitable for a wider range of applications and FriendlyELEC says it is well suited to enterprise consumers who want to develop mini machine vision systems, and embedded systems hobbyists who want to explore and implement all sorts of prototypes. NanoPC-T6 specifications: SoC – Rockchip RK3588 CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ 1.8 GHz GPU – Arm Mali-G610 MP4 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on MediaTek Genio 1200 system-on-module powers Cortex-A78/A55 AIoT & robotics development kit

MediaTek Genio 1200 system-on-module powers Cortex-A78/A55 AIoT & robotics development kit

I-Pi SMARC 1200

ADLINK Technology’s SMARC 2.1 compliant LEC-MTK-I12000 system-on-module (SoM) features the MediaTek Genio 1200 octa-core Cortex-A78/A55 AIoT processor coupled with up to 8GB RAM and 256GB UFS storage, and powers the I-Pi SMARC 1200 development kit designed for robotics and AIoT applications. LEC-MTK-I1200 MediaTek Genio 1200 system-on-module LEC-MTK-I1200 SoM specifications: SoC – MediaTek Genio 1200 (MT8395) octa-core processor with 4x Cortex-A78 cores @ 2.2GHz, 4x Cortex-A55 cores @ 2.0GHz with penta-core Arm Mali-G57 GPU @ 880MHz with support for OpenGL ES 3.2/2.0/1.1, Vulkan 1.1/1.0, OpenCL 2.2, 5.0 TOPS NPU, HiFi 4 audio DSP, etc… System Memory – 4 or 8 GB LPDDR4X Storage – 32, 64, 128, or 256 GB UFS storage, compatible with UFS gear 2.1 Wireless – 802.11b/g/n/ac WiFi 5 2×2 MU-MIMO, Bluetooth 5.0 314-pin MXM connector with Storage – 1x SDIO (4-bit) compatible with SD/SDIO standard, up to version 3.0 Display HDMI 2.0b up to 4Kp60 Dual-channel LVDS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Lolin S3 Mini – Tiny $5 ESP32-S3 board follows Wemos D1 Mini form factor

Lolin S3 Mini – Tiny $5 ESP32-S3 board follows Wemos D1 Mini form factor

LOLIN S3 Mini

LOLIN S3 Mini is a tiny ESP32-S3 WiFi and Bluetooth IoT development board that follows the Wemos D1 Mini form factor and supports its equally tiny stackable shields to add relays, displays, sensors, and so on. Wemos/LOLIN introduced their first ESP32-S3 board last year with the LOLIN S3 board with plenty of I/Os and an affordable $7 price tag.  But I prefer the company’s Mini form factor because of its size and the ability to select add-on boards to easily add a range of features to your projects. So I’m pleased to find out the company has now launched the LOLIN S3 Mini following the ESP32-C3 powered LOLIN C3 Mini board unveiled in March 2022. LOLIN S3 Mini specifications: WiSoC – Espressif Systems ESP32-S3FH4R2 CPU – dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration Memory – 512KB RAM, 2MB PSRAM Storage – 4MB QSPI […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs
Posted on by Ian W MORRISON (Linuxium) - 28 Comments on Beelink SER6 Pro 7735HS Review – Windows 11 benchmarks, USB4 port tested with NVIDIA RTX 3050 eGPU’s

Beelink SER6 Pro 7735HS Review – Windows 11 benchmarks, USB4 port tested with NVIDIA RTX 3050 eGPU’s

Beelink SER6 Pro 7735HS review

Previously I reviewed Beelink’s SER6 Pro mini PC when it was released with an AMD Ryzen 7 6800H processor, mentioning that a ‘refreshed’ model had since been released. Beelink have kindly sent me this updated model which now uses an AMD Ryzen 7 7735HS. Given this is virtually an identical processor with just a 50 MHz improvement to the boost frequency, this review will look at confirming that the Windows performance is just as good as before and also revisiting the issues faced previously with the USB4 port. Spoiler alert: the USB4 now works perfectly! Beelink SER6 Pro 7735S specification Beelink list the SER6 Pro 7735HS specifications as: with the only differences to the original SER6 Pro being firstly the AMD Ryzen 7 7735HS processor which has a Max Turbo Frequency of 4.75GHz, and secondly that two variations are also available: one with ports exactly the same as the original […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on The world’s smallest Bluetooth SoC: InPlay NanoBeacon SoC IN100 in 2.0×1.1mm WLCSP package

The world’s smallest Bluetooth SoC: InPlay NanoBeacon SoC IN100 in 2.0×1.1mm WLCSP package

world smallest bluetooth soc IN100 WLCSP

InPlay has just announced a Wafer Level Chip Scale Package (WLCSP) for its NanoBeacon SoC IN100, making it the world’s smallest Bluetooth System-on-a-Chip (SoC) at just 2.0 x 1.1 x 0.35mm. The NanoBeacon IN100 is not new per se, and we covered the still tiny Bluetooth SoC when writing about Sparkfun NanoBeacon Bluetooth 5.3 module based on the DFN8 package measuring 2.5×2.5mm. The highlights include its low-code/no-code interface and an ultra-low power consumption of below 1 uW. InPlay NanoBeacon SoC IN100 specifications: Memory – 4 KB SRAM +  4 Kbit OTP memory Bluetooth 5.3 compliant Beacon Modes: Proprietary, BT, Google Eddystone, and Apple iBeacon compliant 2.4GHz RF frequency band, MedRadio band (2.36GHz) Programming-free and firmware-less design Long-range transmission: up to several hundred meters Security Authentication of beacon ID Privacy of advertising payload Supply voltage range – 1.1V ~ 3.6V (Single 1.5V coin battery support) Power consumption Sub-uW power consumption for […]

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...