Posted on

u-blox introduces WiFI 5/6 & Bluetooth 5 M.2 cards

u-blox is well known for its wireless modules be it WiFi, Bluetooth, GPS, or cellular connectivity that are soldered unto CPU modules or boards. But the company has now introduced two M.2 cards with WiFi 5 or WiFi 6 and Bluetooth 5.x that work with NXP i.MX evaluation and development boards. M2-JODY-W2 M.2 card The M2-JODY-W2 card comes with the following features: Connectivity Wi-Fi 5 1×1 SISO IEEE 802.11ac data rates up to 433 Mbit/s (PHY, MCS9), beamforming Supports 802.11d/e/h (DFS)/i/k/r/u/v/w/ai Wi-Fi 20, 40, and 80 MHz channels Bluetooth BR/EDR and Bluetooth low energy v5.0 supporting 2 Mbit/s Access point mode for up to 8 stations 2x u.FL antenna connectors Host interfaces SDIO & UART host interfaces PCM interface for Bluetooth audio Security Hardware encryption engines: AES and TKIP WPA, WAPI, WPA2, WPA3, WPS, and Easy Connect Dimensions – M.2 Type 2230 Key E form factor Certifications – Chipset is […]

Posted on

u-Blox Launches JODY-W3 WiFi 6 & Bluetooth 5.1 Module for Automotive Applications

u‑blox has just launched JODY-W3 wireless module which the company claims to be the first automotive-grade WiFi 6 module. Apart from supporting 802.11ax WiFi with 2×2 MIMO, the module also comes with dual-mode Bluetooth 5.1 connectivity. WiFi 6 will be used for applications demanding higher bitrates such as ultra‑HD video infotainment streaming and screen mirroring, wireless back‑up cameras and cloud connectivity as well as vehicle systems maintenance and diagnostics. Bluetooth 5.1 will be used for keyless entry systems and other applications leveraging direction-finding and the longer range offered by the latest version of Bluetooth. JODY-W3 module specifications: Connectivity Dual-band 802.11ac WiFI 5 and 802.11ax WiFI 6 with 2×2 MIMO support, WPA3 security Bluetooth 5.1 Classic and Low Energy; HCI profile Antennas JODY-W374 variant – 2x antenna pins for separate Bluetooth and Wi-Fi external antennas JODY-W377 variant – 2x antenna pins for Wi-Fi and one antenna pin for Bluetooth external antennas […]

Khadas Edge2 Arm mini PC
Posted on

RAK Wireless Introduces LoRa + BLE Module, LoRa GPS Tracker, and NB-IoT/eMTC Arduino Shield

We’ve previously covered several products from RAK Wireless, including RAK WisCam Arduino compatible Linux camera, RAK CREATOR Pro Ameba RTL8711AM WiFi IoT board, and WisCore modular development kit for application leveraging voice assistants such as Amazon Alexa. AFAIK, the company had not released any new products since their RAK831 LoRa gateway module launched last summer, but they just contact me with the release of three new wireless products, namely RAK813 BLE + LoRa module, RAK811 LoRa tracker board, and WisLTE NB-IoT/eMTC/eGPRS Arduino shield. RAK813 BLE + LoRa module & Development Board Main features and specifications: Connectivity LoraWAN via Semtech SX127x (LoRa) chipset Frequency Ranges 433MHz, 470MHz FCC Frequency range 902~928MHz CE Frequency range 863~870MHz MIC Frequency range 920~928MHz KCC Frequency range 920~923MHz Receiver Sensitivity: LoRa down to -146 dBm TX Power – adjustable up to +14 dBm, max PA boost up to 20dbm Range – Up to 15 km in rural […]

Posted on

u-blox SARA-S200 RPMA Module Supports the Machine Network

RPMA is one of the many LPWAN IoT communication standards, but it does not get as much press coverage as SigFox or LoRa because it targets larger scale deployments, and is not really accessible to individuals. It’s still used by companies in many countries, and u-blox has just released SARA-S200 RPMA module that will also work with the Machine Network, also relying on RPMA and managed by Ingenu. u-blox SARA-S200 module specifications: Connectivity Wireless Frequency –  2.4 GHz ISM Radio Spectrum – 80 MHz Occupied Bandwidth – 1 MHz Modulation – Dynamic – Direct Sequence Spread Spectrum (D-DSSS) Multiple Access Scheme – Random Phase Multiple Access (RPMA) Transmit Power – +22 dBm Receive Sensitivity – -133 dBm Data Throughput – 100 kB per day Link budget – 176 dB (FCC/IC) Host Interface – 7-wire SPI that includes handshaking for deep sleep modes Power Supply – 3.2 V to 3.4 V […]

Posted on

Arduino Unveils its First FPGA Board with MKR Vidor 4000, Updates UNO WiFi Board with ATmega4809 MCU

Arduino has been busy with new boards announcements in the last week, as after introducing MKR WiFi 1010 and MKR NB 1500 IoT boards with respectively WiFi + Bluetooth, and NB-IoT + eMTC connectivity, the company has now unveiled two new boards. MKR Vidor 4000 is the very first official Arduino board with an FPGA, while UNO WiFi Rev2 is an upgrade of UNO WiFi board featuring the new Microchip ATmega4809 MCU and an U-blox wireless module instead of an ESP8266 chip. MKR Vidor 4000 Preliminary specifications: FPGA part FPGA – Intel Cyclone FPGA with 16K Logic Elements, 504Kbit of embedded RAM and 56 18×18 bit HW multipliers for high-speed DSP System Memory – 8 MB SDRAM Storage – 2 MB QSPI Flash (1MB for user applications) Micro HDMI connector MIPI camera connector mini PCIe connector with up to 25 user programmable pins MCU – Microchip SAMD21 Cortex-M0+ 32bit low […]

Posted on

SparkFun Thing Plus – NORA-W306 – A dual-band Wi-Fi 4 and BLE 5.3 IoT board

SparkFun Thing Plus – NORA-W306, is a dual-core, dual-band WiFi 4 and BLE 5.3 microcontroller board in the AdaFruit Feather form factor based on the u-box NORA-W306 module and targeted at low-power wireless applications. The u-blox module integrates the Realtek RTL8720DF chip, a dual-core ARM Cortex-M33 and Cortex-M23 microcontroller with dual-band Wi-Fi (2.4GHz and 5GHz) and Bluetooth 5.3 Low Energy. It offers up to 4MB of encrypted flash and has an onboard PCB antenna. It’s very similar to the RealTek RTL8720DN we covered a few times in the past, but comes with embedded flash. The SparkFun Thing Plus – NORA-W306 board features a USB-C connector for programming, data, and power. The USB data lines are protected against electrostatic discharge and are connected to a CP2102N USB-to-serial converter for uploading code or serial. This board includes a 2-pin JST-style connector for a LiPo battery, a single-cell charger, and a LiPo fuel […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Quectel LG290P is the world’s first quad-band GNSS module (L1, L2, L5, and E6)

The Quectel LG290P is a quad-band, multi-constellation, high-precision, real-time kinematic (RTK) GNSS module that supports GPS, GLONASS, Galileo, BDS, QZSS, and NavIC constellations. A typical GNSS module like the SparkFun GNSS L1/L5 can receive signals from only one or two frequency bands, but the Quectel module can receive signals from four different frequency bands (L1, L2, L5, and E6) simultaneously and features built-in anti-jamming technology for improved signal reception in challenging environments. All these measures make this chip suitable for high-precision navigation applications like autonomous robots, UAVs, precision agriculture, surveying and mapping, and autonomous driving. Previously we have written about higher precision GPS modules like the SparkFun RTK EVK module, SparkFun RTK Torch module, the Cavli C17QS IoT GNSS module and much more feel free to check those out if you are interested in those topics. Quectel LG290P GNSS module specification Main module- LG290P GNSS Frequency bands and constellations GPS – L1 […]

Posted on

SparkFun RTK Torch is a compact and waterproof GNSS surveyor with RTK functionality

SparkFun’s RTK Torch is a real-time kinematic (RTK) surveying device that offers tri-band reception, tilt compensation, and millimeter accuracy in a portable, waterproof enclosure. It features an ESP32-WROOM module with 16MB flash and 2MB PSRAM, providing Wi-Fi and Bluetooth functionality. The onboard RTK-capable Unicore UM980 module receives various GNSS frequencies with high accuracy and supports all available constellations and frequencies. Also included is an STMicroelectronics STM32WLE5CCU6 MCU for obtaining corrections via LoRa radio. The RTK Torch builds on the earlier RTK Facet, adding improvements such as wider reception, higher precision, and a more portable form factor. Like the Facet, the RTK Torch comes in a bundle that includes a carrying case, a 3m USB C-to-C charging cable, a 65W PD wall adapter, and a 1/4in. to 5/8in. antenna thread adapter. It supports several operating modes including GNSS Positioning (~800mm accuracy) – also known as ‘Rover’ GNSS Positioning with RTK (8mm […]

Khadas VIM4 SBC