Posted on

7-inch and 10.1-inch industrial panel PCs feature Raspberry Pi 5 SBC

After introducing several Raspberry Pi CM4-based panel PCs over the years, EDATEC has launched its first industrial panel PCs based on the Raspberry Pi 5 SBC with the HMI3010-070C and HMI3010-101C equipped respectively with a 7-inch and 10.1-inch touchscreen display. Both HMI displays expose most I/Os and features from the Raspberry Pi 5 including the two micro HDMI ports, the USB-C port for power, the four USB Type-A connectors, and the gigabit Ethernet RJ45 jack. The company also offers an 8MP front-facing camera and/or PoE as options. EDATEC HMI3010 specifications: SoC – Broadcom BCM2712 CPU – Quad-core Arm Cortex-A76 processor @ 2.4 GHz with crypto extensions, 512KB per-core L2 caches, 2MB shared L3 cache GPU – VideoCore VII GPU @ 800 MHz with support for OpenGL ES 3.1, Vulkan 1.2, 4Kp60 HEVC decoder System Memory – 4GB or 8GB LPDDR4X-4267 SDRAM Storage – Optional 32GB or 64GB MicroSD card  Display […]

Posted on

SaraKIT – An Raspberry Pi CM4 board with ChatGPT-based voice control, motor control, and plenty of sensors (Crowdfunding)

SaraKIT is a carrier board for the Raspberry Pi CM4 system-on-module with BLDC motor controllers and a range of sensors for robotics, support for ChatGPT-based voice control through three microphones and a ZL38063 audio chip, and two MIPI CSI connectors for cameras. The versatile board can be used for voice-controlled products, robots, home automation systems, and interfacing with smart home or office devices. The company also developed various demos such as a Smartphone-controlled LEGO RC car, a self-balancing LEGO robot, a pan-and-tilt camera, various AI demos using MediaPipe such as face tracking and object detection, as well as audio demos using ChatGPT, Alexa, and/or Google Home. SaraKIT specifications: Support system-on-modules – Raspberry Pi Compute Module 4 (CM4) with future CM5 compatibility. MCU – Microchip dsPIC33 16-bit microcontroller with 32 KB SRAM for motor control and LSM6DS3TR sensor Audio Microchip ZL38063 (previously MicroSemi) audio processor for microphone arrays. 3x Knowles SPH0655 […]

Khadas Edge2 Arm mini PC
Posted on

MessengerPi – A LoRa messenger and walkie-talkie based on Raspberry Pi RP2040 (Crowdfunding)

SB Components MessengerPi is a DIY messenger and walkie-talkie based on a Raspberry Pi RP2040 that relies on LoRa communication for P2P messaging over distances of up to 5 kilometers and calls up to 300 meters away. The company actually provides two boards: the MessengerPi itself for both calls and messaging with a keyboard, and the smaller “Walky Talky” board for audio communication only and without a LoRa module. Messenger Pi specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM Storage – MicroSD card slot Wireless Ebyte E22-900T22S LoRa module (also used in the company’s LoRa HAT for Raspberry Pi) Based on the Semtech SX1262 transceiver Operates in the 850 MHz to 930 MHz band Up to 5km LoRa text messaging SB Components marked Walkie-Talkie module 16 FRS channels Tx Power – Up to 17 dBm Rx sensitivity – Up to -98dBm Audio communication […]

Posted on

Raspberry Pi 5 gets an M.2 PCIe HAT – Meet PineBerry Pi HatDrive

The Raspberry Pi 5 SBC comes with a PCIe 2.1 x1 interface that has not been overly useful so far since it’s exposed through a non-standard FPC connector. Raspberry Pi Ltd is working on its own HATs to make use of the PCIe connector, but PineBerry Pi may have beaten them to it with the launch of the HatDrive M.2 HAT for Raspberry Pi 5. The HatDrive comes with an M.2 Key-M socket with a PCIe x1 interface and support for 2230 and 2242 modules, so you can install an SSD, an AI accelerator, or another compatible M.2 module. The HAT is connected through a 40mm long 16-pin FPC cable (that supports up to PCIe Gen3) as well as the 40-pin Raspberry Pi GPIO header for the I2C EEPROM required by compliant HATs, plus power supply monitoring and diagnostics, and to let users add another HAT on top if needed. […]

Posted on

EDATEC launches two fanless cases for the Raspberry Pi 5 SBC

In my review of the Raspberry Pi 5 SBC I noted performance was much improved over the Raspberry Pi 4 but that the board required active cooling with the official solutions (active cooler and case with fan) for optimal performance under load and there weren’t any official fanless cases for the latest Raspberry Pi single board computer. EDATEC aims to fill that gap with two fanless cases for the Raspberry Pi 5 SBC, namely the ED-Pi5Case-B with a low-profile, but closed design, and the ED-Pi5Case-O open case with two heatsinks placed on the top and bottom of the Raspberry Pi 5. Both fanless cases are made of aluminum (CNC milled), available in silver or black, and provide easy access to all ports and most interfaces of the Raspberry Pi 5 including the GPIO header, MIPI connectors, PCIe FPC connector, and PoE header. However, the closed enclosure blocks the battery and […]

Posted on

Raspberry Pi 5 review – Part 2: Raspberry Pi OS Bookworm, benchmarks, power consumption, and more

A few days ago I finally went through the Raspberry Pi 5 kit I received last September going through all the items and booting it with Raspberry Pi OS bookworm. I’ve now had time to perform more tests to check out the performance with benchmarks and test various features on the Raspberry Pi 5. So I’ll report my experience in the second part of the review and compare the Raspberry Pi 5 SBC to the Raspberry Pi 4 and some other Arm Linux SBCs.

System information in Raspberry Pi OS Bookworm

Last time around, I installed the Raspberry Pi 5 in its official case, but for most of the testing, I decided to go back to the bare board fitted with its active cooler since it’s the best cooling option as we’ll see further in the review.

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

Arm makes strategic investment in Raspberry Pi

Arm has just acquired a minority stake in Raspberry Pi through a strategic investment in order “to deliver critical solutions for the Internet of Things (IoT) developer community.” Paul Williamson, SVP and GM, Internet of Things Line of Business, Arm explains the rationale behind the investment: Arm and Raspberry Pi share a vision to make computing accessible for all, by lowering barriers to innovation so that anyone, anywhere can learn, experience and create new IoT solutions. With the rapid growth of edge and endpoint AI applications, platforms like those from Raspberry Pi, built on Arm, are critical to driving the adoption of high-performance IoT devices globally by enabling developers to innovate faster and more easily. This strategic investment is further proof of our continued commitment to the developer community, and to our partnership with Raspberry Pi. Eben Upton, Raspberry Pi founder and CEO, also provided remarks: Arm technology has always […]

Posted on

Raspberry Pi 5 Kit Review – Part 1: Unboxing, Assembly and First Boot

I’m quite late on that one, but after an extended holiday, I’m now ready to review the Raspberry Pi 5 the company sent me last month. I’ll do so with the latest Raspberry Pi OS Bookworm based on Debian 12 and CNX Software’s “tropical reviews” are usually more demanding than most others due to the higher ambient temperature (usually around 28°C in my room) in Thailand. But since Raspberry Pi did not just send the Raspberry Pi 5, but a full kit with keyboard, mouse, enclosure, and more, I’ll start with a post mostly looking at the hardware with an unboxing, assembly, plus a quick try at Debian 12 on the new SBC. Raspberry Pi 5 Kit Unboxing Besides the Raspberry Pi 5 itself, the package included the active cooler (heatsink + fan), a microSD card preloaded with a pre-release Raspberry Pi OS Bookworm image, a USB-PD power supply, a […]

Khadas VIM4 SBC