CNX Software - Embedded Systems News

November 28, 2024 by Debashis Das - 2 Comments

Waveshare launches three RP2350 USB-C development boards with castellated design, battery support, built-in Ethernet port

Waveshare has announced four new USB-C and USB-A development boards based on the Raspberry Pi RP2350 MCU: the Waveshare RP2350-Plus dev board, the Waveshare RP2350-Zero Mini dev board, the Waveshare RP2350-ETH Mini dev board, and the Waveshare RP2350-GEEK USB dev board. The RP2350-Plus is a low-cost, high-performance Pico-like development board with the RP2350 MCU, various I/O, battery support, USB Type-C, and compatibility with Raspberry Pi Pico modules. The RP2350-Zero Mini is another compact dev board with castellated pins, 29 GPIOs, USB Type-C, PIO, and versatile peripheral support, ideal for IoT, robotics, and embedded systems. The RP2350-ETH Mini dev board has Ethernet support and various GPIO functionalities, making it ideal for IoT development. Like any other RP2350 board, the Waveshare RP2350 boards support C/C++ and MicroPython SDKs with drag-and-drop firmware flashing via USB mass storage. Waveshare RP2350-Plus development board The Waveshare RP2350-Plus is a low-cost development board that comes in a […]

November 28, 2024November 28, 2024 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$16 Banana Pi BPI-WiFi5 router is powered by Siflower SF19A28 dual-core MIPS SoC

Banana Pi BPI WiFi5 Low-cost WiFi 5 router

Banana Pi BPI-WiFi5 is a low-cost WiFi 5 AC1200 router with four gigabit Ethernet ports powered by a 1.2 GHz Siflower SF19A28 dual-core MIPS SoC coupled with 64MB DDR2 and an 8MB flash. It’s not the first low-cost router from the company, as the Banana Pi BPI-WiFi6 Mini was introduced this summer for $30 with Triductor TR6560 SoC, and with the Banana Pi BPI-WiFi5, they’ve now introduced a lower-end WiFi 5 router going for just about $16 plus shipping on AliExpress or $29.99 on Amazon. Banana Pi BPI-WiFi5 specifications: SoC – Siflower SF19A2890S2 dual-core MIPS processor @ 1.2GHz System Memory – 64MB DDR2 RAM Storage – 8MB flash Networking Switch – Airoha AN8855R Gigabit Ethernet switch 1x Gigabit Ethernet WAN port 3x Gigabit Ethernet LAN ports Wireless 2.4 GHz WiFi 2×2 MIMO up to 300 Mbps 5 GHz WiFi 2×2 MIMO up to 866.7 Mbps Frequency bands 2.4GHz – 2.4GHz […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

November 28, 2024November 28, 2024 by Tomisin Olujinmi - No Comments

ESP32-based YULC USB-C LED Controller features dual power inputs, supports WLED and ESPHome firmware

The YULC (Yes, a USB-C LED Controller) board is a compact, ESP32-S3-powered LED controller with USB-C and DC jack power inputs. It is a fully featured board that can easily replace a rat’s nest of wires and save space and time. This ESP32 LED controller features a built-in buck regulator that converts input power from the USB-C port or barrel jack to the voltage needed for the LED strips. The YULC provides two separate LED channels with a level shifter each to ensure clean and powerful data output, removing the need for a sacrificial pixel or external level shifter. Each channel also has a power MOSFET that can turn off the channels individually and dim simple LED strips via PWM. AAElectronics, the maker, has previously released an IR remote—the Home Assistant-compatible ESP 360 Remote—which we covered at the time. Similar products include the SMLIGHT A1-SLWF-03, DFRobot’s EDGE102-DMX512, and the PixelBlaze […]

November 27, 2024 by Debashis Das - 1 Comment

Waveshare RP2350-GEEK USB development board doubles as a debugger for Raspberry Pi and other Arm boards

Waveshare has recently launched the RP2350-GEEK USB development board which can also be used as a debugger for Raspberry Pi boards and other Arm-based targets. Built around the Raspberry Pi RP2350 MCU this development board/debugger features a 1.14-inch 65K color IPS LCD, a USB Type-A interface, a microSD card slot supporting SDIO and SPI communication, 16MB NOR-Flash, and multiple interfaces, including 3-pin SWD, USB to UART, and I2C ports. The board is compatible with standard CMSIS-DAP debugging tools like OpenOCD, which attaches to Raspberry Pi’s 3-pin debug connector for debugging. It also features open-source firmware for easy upgrades. Housed in a plastic case, the development board looks like a USB drive and is suitable for debugging, testing, and firmware development in IoT, embedded systems, and educational projects. Waveshare RP2350-GEEK Raspberry Pi debugger specifications Microcontroller – Raspberry Pi RP2350A MCU CPU – Dual-core Arm Cortex-M33 processor @ 150MHz Memory – 520KB internal RAM […]

November 27, 2024December 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

A first look at the Raspberry Pi Development Kit for CM5

Raspberry Pi Development Kit for CM5 Raspberry Pi OS

Raspberry Pi has just launched the Compute Module 5 (CM5) and the company sent me a “Raspberry Pi Development Kit for CM5” for review and to play around with the new Broadcom BCM2712 system-on-module succeeding the Raspberry Pi Compute Module 4 (CM4) introduced in 2020. Today, I’ll have a first look at the development kit checking out the hardware, connecting accessories, booting it up to Raspberry Pi OS, and collecting some basic system information. I’ll do a more in-depth review in a few weeks. Unboxing of the Raspberry Pi Development Kit for CM5 I received the kit in a package reading “Raspberry Pi Development Kit” and “For Raspberry Pi CM5”. That’s a good start… The bottom side lists the package’s content which I will check out shortly, and a link to the documentation. Let’s see what we have with the Raspberry Pi Development Kit: a Raspberry Pi IO Case, a […]

November 27, 2024November 27, 2024 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Raspberry Pi CM5 launched with Broadcom BCM2712 SoC, up to 16GB LPDDR4 ECC memory

The Raspberry Pi Compute Module 5, or Raspberry Pi CM5 for shorts, is now available with up to 16GB LPPDR4 ECC memory, up to 64GB eMMC flash, and an optional WiFi 5 and Bluetooth 5.0 LE wireless module. It has the same form factor as the Raspberry Pi CM4 and CM4 Lite launched in 2020 but delivers a significant performance boost. The Raspberry Pi CM5 is basically a tiny version of the Raspberry Pi 5 SBC designed for embedded applications with a Broadcom BCM2712 quad-core Cortex-A76 SoC, and offered with 2GB to 16GB RAM, optional 16GB to 64GB eMMC flash, and optional WiFi 5 and Bluetooth 5.0 module. As usual, there are also Raspberry Pi CM5 Lite versions without any eMMC flash meant to be booted from a microSD card or an SSD on the carrier board. Raspberry Pi Compute Module 5 Raspberry Pi CM5 specifications: SoC – Broadcom BCM2712 […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

November 27, 2024November 30, 2024 by Sponsored Post - Comments Off

Black Friday Sale Once a Year: Lifetime Office Suites Only for $15.29! Only One Week Left! (Sponsored)

Godeals Black Friday 2024 Microsoft Office Suites

Deals for Black Friday 2024 come and go, but it’s difficult to come across one that really sticks out. One of these exceptions is this year’s Microsoft Office & Windows deals from Godeal24 Black Friday Crazy Sale, helping you save over 90%. They not only provide excellent value for money but also ensure that you have access to the most recent features and upgrades. Let’s dive in! Buying a lifetime Office 2021 Pro for $35.11 will be your smartest move on Black Friday. One of the standout features of Office Professional 2021 is its real-time collaborative editing across applications. Microsoft Teams (which is lacking in Office 2019 and Office 2024) is seamlessly integrated throughout the software. When it comes to the most affordable Office suite, that must be Office 2016 Pro for $15.29. If you have an older version of Windows like Windows 7, Office 2016 is your first option! […]

November 27, 2024November 26, 2024 by Debashis Das - No Comments

LILYGO T-Bao tiny AI robot combines ESP32 and Kendryte K210 RISC-V chip, features camera and display

The T-Bao AI robot is a compact embedded device/robot that combines an ESP32 and a K210 RISC-V microcontroller and can perform face recognition and robotics applications. This compact device features a 1.54-inch 240×240 capacitive touch screen, a 2MP OV2640 camera, a MAX98357A I2S audio amplifier, a DRV8833 motor driver, an MPU6050 6-axis motion sensor, and an AXP202 PMU for power management. Additionally, it supports USB charging, offers LEGO blocks compatibility, and can move around with integrated caster wheels. These features make it usable for educational projects, robotics, IoT applications, and embedded systems prototyping. LILYGO T-Bao specifications SoCs Kendryte K210 dual-core 64-bit RISC-V processor @ 400 MHz with 8MB on-chip RAM, various low-power AI accelerators delivering up to 0.5 TOPS ESP32-D0WDQ6-V3 dual-core Xtensa LX6 processor, 240 MHz, 16MB Flash, 8MB PSRAM Display – 1.54-inch capacitive touch LCD (240×240) Camera – 2MP OV2640 with rolling shutter, UXGA (1600 x 1200) resolution, 180-degree […]