CNX Software - Embedded Systems News

February 4, 2011February 5, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Folders and Files Comparison in Linux with Meld

Beyond Compare and Winmerge are tools that can be used to compare files in Windows, but the latter is not available in Linux and the former is only available as a commercial application. One alternative is to use Meld, a diff and merge tool for Linux. This open source program is a GUI for diff2 and diff3 written using pygkt toolit based on Python, Glade and GTK+. This is not as powerful as the two programs aforementioned, but still very useful. It can also compare 3 files at the same time. To install it in ubuntu: sudo apt-get install meld It will still allow you to compare files, directory and merge changes. The file comparison merge function is a little confusing at first, but after a while you’ll get used to it. Meld can also support version control comparison with CVS, SVN, GIT, Bazaar-ng or Mercurial.

February 4, 2011May 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Cross-compiling Python for MIPS and ARM Platforms

Python programming language is used in several open source projects such as Sugar OS and Xibo. Let’s see if we can cross-compile it in Ubuntu 10.10 using a mips compiler. I’ll use the instructions given at http://randomsplat.com/id5-cross-compiling-python-for-embedded-linux.html. Let’s download Python 2.7.1 first and extract the source code:

tar xjvf Python-2.7.1.tar.bz2

1	tar xjvf Python-2.7.1.tar.bz2

Then run the following command in Python-2.7.1 in order to build some tools for the host:

./configure
 make python Parser/pgen
 mv python hostpython
 mv Parser/pgen Parser/hostpgen
 make distclean

./configure

make python Parser/pgen

mv python hostpython

mv Parser/pgen Parser/hostpgen

make distclean

There is no patch for Python 2.7.1 cross-compilation in the link above, so let’s just try to configure and build it:

CC=mipsel-linux-gcc CXX=mipsel-linux-g++ AR=mipsel-linux-ar RANLIB=mipsel-linux-ranlib ./configure --host=mipsel-linux --target=mipsel-linux --prefix=/python
make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen BLDSHARED="mipsel-linux-gcc -shared" CROSS_COMPILE=mipsel-linux- CROSS_COMPILE_TARGET=yes

CC=mipsel-linux-gcc CXX=mipsel-linux-g++ AR=mipsel-linux-ar RANLIB=mipsel-linux-ranlib ./configure --host=mipsel-linux --target=mipsel-linux --prefix=/python

make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen BLDSHARED="mipsel-linux-gcc -shared" CROSS_COMPILE=mipsel-linux- CROSS_COMPILE_TARGET=yes

If we don’t use a patch the first error is:

Include/pyport.h:243:13: error: #error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG"

1	Include/pyport.h:243:13: error: #error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG"

So I used some older patch to create a new patch: http://www.cnx-software.com/patch/python-2.7.1-cross-compile.patch. You can download it an apply it as follows:

patch -p1 < python-2.7.1-cross-compile.patch

1	patch -p1 < python-2.7.1-cross-compile.patch

And repeat the step above to configure and cross-compile Python for mips. Finally install Python in ~/Python-2.7.1/install for example:

make install HOSTPYTHON=./hostpython BLDSHARED="mipsel-linux-gcc -shared" CROSS_COMPILE=mipsel-linux- CROSS_COMPILE_TARGET=yes prefix=~/Python-2.7.1/install

1	make install HOSTPYTHON=./hostpython BLDSHARED="mipsel-linux-gcc -shared" CROSS_COMPILE=mipsel-linux- CROSS_COMPILE_TARGET=yes prefix=~/Python-2.7.1/install

After that copy all necessary files in ~/Python-2.7.1/install to your […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

February 3, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Android Event: Android 3.0 Presentation and MarketPlace Update

Google Android Event on the 2nd of February 2011 was divided into two part a demo about Android 3.0 (Honeycomb) features on Motorola Xoom (First 30 minutes) and an update on Android market place with the new Android market Webstore. The full event (below) lasts for around 53 minutes. If you are in a hurry, you can check the summary under the video and screenshots. During the Android 3.0 presentation, they showcased some of the platform new features such as the multitask button (e.g. to show recent apps), the grid widget, the stack widget and the new notifications mechanism. They also demo’ed backward compatibility of older apps development for Android 2.x by playing Fruit Ninja game. Then the used Gmail app to show the new features of the application framework suh as fragments, drag and drop and the application bar. They spent a fair amount of time boasting 2D and […]

February 2, 2011February 2, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Ayuda Splash Digital Signage Player Becomes Open Source

Ayuda Media Systems announced OpenSplash – a free, open source digital signage player at ISE 2011. Press Release Excerpt: Ayuda Media Systems (“Ayuda”) announced today at ISE 2011 that it will be open sourcing its Splash Digital Player. Dubbed “OpenSplash”, it is a free, multi-platform open source player that can be driven by any content management and scheduling system. “Offering a free, open source media player will enable a new wave of innovation in the signage industry” said Andreas Soupliotis, President & CEO of Ayuda. “There are a multitude of software vendors in the space that basically all do the same thing – push content from a content management system (CMS) to a network of players. Some do it a little better than others but the differentiation of identity is just not there. If there were a standard open software player that the industry rallied behind then everyone could focus […]

February 1, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Picture Size Optimization for Embedded Systems

If you are developing an embedded system that requires a graphical user interface, you’ll likely have quite a few icons and/or images to store in the flash/rom. If your hardware has limited space, you may have to optimize the size of picture so that they can fit into your flash with no or minimal loss of quality. Reducing image size may also be of interest for mobile websites that can be accessed by devices with lower hardware specs and relatively low network throughput (EDGE/3G). I’ll use GIMP 2.6 – The GNU Image Manipulation Program to work on pictures in order to optimize their size. Selecting the picture format The most common picture file formats are bmp, jpg, png and gif. BMP File Format (aka Bitmap Image File or Device Independent Bitmap) can not compress images except for 8-bit color depth, so it is not suitable for embedded systems. JPG File […]

January 31, 2011January 31, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Near Field Communication (NFC) in Public Transport

The NFC Forum, a non-profit industry association that advances the use of Near Field Communication (NFC) technology, has recently published a White Paper entitled “NFC in Public Transport” and show how you can leverage NFC technology in such environment. The whitepaper mainly focuses on mobile phones, readers and smart posters. If you need an introduction about NFC, including starting points for developing hardware and software, please read our previous blog entry first. What can NFC do in public transport ? After a short NFC introduction, the whitepaper deals with the possible applications related to public transport including: Transport timetables Link to an up-to-date weather report website Special discounted travel offers Location relevant maps Next bus arrival time Taxi services Emergency calls Phone-to-phone transfer of destination addresses and maps to taxi driver and how NFC can be used before the journey (e.g. paying for parking, using smart poster for products/services promotions […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs

January 28, 2011January 28, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Support for HTML5 Youtube Videos (iFrame) in WordPress

WordPress 3.x will automatically remove iFrame tags when you switch between HTML and Visual mode. In order to prevent that issue, simply install TSL iframe unfilter plugin.This will fix the issue of Youtube iframe embedded code disappearing or any other iframe code you’ve got. To automatically center Youtube videos using the iframe embedded code (supporting for flash and HTML5), edit style.css in Appearance->Editor, and add the lines /* Align iFrame Youtube Videos */ .youtube-player { display: block; margin: 0 auto; }

January 28, 2011February 9, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Android 3.0 SDK Preview and Platform Highlights

Google has just released Android 3.0 (Honeycomb) preview SDK and platform highlights. Android 3.0 Highlights Summary New User Features: New UI designed from the ground up for tablets (larger screens) System Bar, for global status and notifications Action Bar, for application control: access to contextual options, navigation, widgets, or other types of content in the Action Bar, displayed at the top of the screen. Five Customizable Home screens with widgets, app shortcuts, and wallpapers using a dedicated visual layout mode. Recent Apps, for easy visual multitasking Redesigned keyboard to improve typing speed/accuracy on tablets. Improved text selection, copy and paste New connectivity options such as Media/Photo Transfer Protocol, USB / Bluetooth keyboards Updated set of standard apps for larger screens. Browser Improvements: Multi-tabs support, “incognito” mode, better browsing experience at non-mobile sites through an improved zoom and viewport model, overflow scrolling, support for fixed positioning, and more. Camera and Gallery: […]