Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on ASRock launches Intel Processor N100 motherboards with 24-pin ATX connector or DC-in jack

ASRock launches Intel Processor N100 motherboards with 24-pin ATX connector or DC-in jack

ASRock N100DC-ITX motherboard

ASRock has launched two new similar low-cost Alder Lake-N motherboards powered by a 3.4 GHz Intel Processor N100 quad-core CPU with the N100M micro-ATX motherboard featuring a 24-pin ATX connector for power, and the N100DC-ITX mini-ITX motherboard getting powered through a DC-in jack compatible with 19V power adapters. Both motherboards have very similar specifications with support for up to 32GB DDR4 single-channel memory, M.2 NVMe SSD and two SATA drives, and offer multiple video outputs including HDMI, VGA, and DisplayPort (N100M only), Gigabit Ethernet, up to sixteen USB interfaces, PCIe slots, and more. ASRock N100M/N100DC-ITX specifications: SoC – Intel Processor N100 quad-core Efficient “Alder Lake-N” processor clocked at up to 3.4 GHz with 24EU Intel UHD graphics up to 750 MHz System Memory – Up to 32GB DDR4-3200 memory via DDR4 DIMM slot Storage 1x M.2 socket (M2_1, Key M), supports type 2242/2260/2280 PCIe Gen3 x2 (16 Gb/s) mode 2x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4

Orange Pi Compute Module 4 is a system-on-module mechanically and electrically compatible with the Raspberry Pi CM4, but powered by a Rockchip RK3566 quad-core Arm Cortex-A55 AI processor just like the Radxa CM3 introduced a few years ago, or more recently the Banana Pi BPI-CM2 (RK3568). The new module, also called Orange Pi CM4 for shorts, comes with 1GB to 8GB RAM, 8GB to 128GB eMMC flash, and an optional 128/256MBit SPI flash, as well as a Gigabit Ethernet PHY and on-board WiFi 5 and Bluetooth 5.0. It comes with the two 100-pin high-density connectors found on the Raspberry Pi CM4, and a smaller 24-pin connector for extra I/Os. Orange Pi Compute Module 4 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 2EE GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on SemiDrive D9-Pro (D9360) Arm Cortex-A55/R5 processor powers industrial CPU module for motor control

SemiDrive D9-Pro (D9360) Arm Cortex-A55/R5 processor powers industrial CPU module for motor control

MYD JD9360 SemiDrive D9 Pro Development Board

MYiR MYC-JD9360 is a CPU Module powered by SemiDrive D9-Pro (D9360) processor with six Arm Cortex-A55 application cores, a dual-core lock-step Cortex-R5 real-time core along with a PowerVR GPU, 4Kp30 H.265/H.264 VPU and a 0.8 TOPS NPU, and designed for motion control and industrial applications. The MYC-JD9360 CPU module also comes with 2GB LPDDR4, 16GB eMMC flash, 16MB QSPI Flash, 256Kbit EEPROM, and exposes I/Os such as PCIe 3.0, USB 3.0, CAN FD, and TSN-enabled Gigabit Ethernet through a 314-pin MXM connector. The company also provides the MYD-JD9360 development board to quickly get started with the module and evaluate the solution. MYiR MYC-JD9360 CPU module with SemiDrive D9-Pro SoC Specifications: SoC – SemiDrive D9-Pro (D9360) CPU Application – Hexa-core Arm Cortex-A55 processor @ 1.6 GHz Real-time – Dual-core lock-step Cortex-R5 cores @ 800MHz GPU – Imagination PowerVR 9XM GPU @ 100 GFLOPS VPU – 4Kp30 H.265/VP8/VP9 video decoder, 4Kp30 H.264 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Sipeed unveils RISC-V tablet, portable Linux console, and cluster

Sipeed unveils RISC-V tablet, portable Linux console, and cluster

Sipeed RISC-V tablet, cluster, Linux console

Sipeed has unveiled three new hardware platforms based on the LM4A RISC-V system-on-module found in their LicheePi 4A SBC, namely the Lichee Cluster 4A cluster for native RISC-V compilation, the Lichee Pad 4A 10.1-inch tablet running Android 13 or Debian, and the Lichee Console 4A a portable Linux console with a small 7-inch display and a built-in keyboard. As a quick reminder, the Sipeed LM4A SoM is based on the Alibaba T-Head TH1520 quad-core RISC-V processor @ 1.8 to 2.5 GHz that has just gotten some support in Linux 6.5, comes with up to 16GB RAM and up to 64 GB eMMC flash, integrates two Gigabit Ethernet PHY, and exposes all I/Os through a 260-pin SO-DIMM connector. We’ve previously noticed the TH1520 module delivers performance similar to the Raspberry Pi Compute Module 4 and even more when using a customized toolchain. Lichee Cluster 4A All new Sipeed hardware platforms feature […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Linux 6.5 release – Notable changes, Arm, RISC-V and MIPS architectures

Linux 6.5 release – Notable changes, Arm, RISC-V and MIPS architectures

Linux 6.5 release

Linus Torvalds has just announced the release of Linux 6.5 on the Linux Kernel Mailing List (LKML): So nothing particularly odd or scary happened this last week, so there is no excuse to delay the 6.5 release. I still have this nagging feeling that a lot of people are on vacation and that things have been quiet partly due to that. But this release has been going smoothly, so that’s probably just me being paranoid. The biggest patches this last week were literally just to our selftests. The shortlog below is obviously not the 6.5 release log, it’s purely just the last week since rc7. Anyway, this obviously means that the merge window for 6.6 starts tomorrow. I already have ~20 pull requests pending and ready to go, but before we start the next merge frenzy, please give this final release one last round of testing, ok? Linus The earlier […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 24 Comments on Cool Pi Arm Linux Laptop with Rockchip RK3588 SoM sells for $358 and up.

Cool Pi Arm Linux Laptop with Rockchip RK3588 SoM sells for $358 and up.

Cool Pi Laptop

Cool Pi has put its CM5 Rockchip RK3588 system-on-module to good use by integrating it into a 14.1-inch laptop with 1920×1080 resolution running Android 12, Ubuntu 22.04, or other Linux distributions. The Cool Pi laptop comes with up to 32GB LPDDR4X memory, up to 256GB eMMC flash, features an M.2 socket for additional NVMe storage, as well as HDMI 2.1 video output and a USB-C port with DisplayPort Alt. mode to enable triple display setups with the laptop.   Cool Pi laptop specifications: System-on-Module – Cool Pi CM5 SoC – Rockchip RK3588 octa-core processor with 4x Cortex‑A76  cores @ up to 2.2 GHz, 4x Cortex‑A55 core @ 1.8 GHz Arm Mali-G610 MP4 “Odin” GPU @ 1.0 GHz Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – 8Kp30 H.265/H.264 video encoder 6 TOPS NPU System Memory – 4GB, 8GB, 16GB, or […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Khadas Mind Premium review – Part 3: Ubuntu 22.04 tested on an Intel Core i7-1360P mini PC

Khadas Mind Premium review – Part 3: Ubuntu 22.04 tested on an Intel Core i7-1360P mini PC

Khadas Mind Ubuntu 22.04 Review

Khadas Mind Premium is an ultra-thin mini PC powered by an Intel Core i7-1360P Raptor Lake processor and supports various docks through the Khadas Link connector. We reviewed the mini PC with the Mind Dock in Windows 11 a few weeks ago, and we’ve now had time to install Ubuntu 22.04 to check out the mini PC with Linux. Installing Ubuntu 22.04 on Khadad Mind Premium We decided to install Ubuntu 22.04 alongside Windows 11, so we shrank the Windows partition by about half before inserting a Ubuntu 22.04.3 USB drive to install the Linux distribution. This went smoothly, and in no time we could run Ubuntu 22.04 on Khadas Mind Premium with just two cables, one for power, and the other for the display (both video and power) as we used a wireless mouse and keyboard for user input. Ubuntu 22.04.3 system information The system information in Ubuntu 22.04.3 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Raspberry Shake HAT brings earthquake monitoring to the Raspberry Pi SBC

Raspberry Shake HAT brings earthquake monitoring to the Raspberry Pi SBC

Raspberry shake kit

Raspberry Shake is a family of Raspberry Pi HATs and full seismograph and infrasound monitors designed to enable earthquake monitoring on the popular single board computer Raspberry Pi Shake and Boom (for acoustic monitoring) HATs have been around for a few years, but I only learned about it now through an article on The MagPi Magazine where Branden Christensen, Business Steward, and Mike Hotchkiss, Marketing Director, were interviewed, so I decided to have a closer look. Four main models of the Raspberry Shake are available: RS1D vertical motion seismograph with a single motion velocity sensor to detect earthquakes RS3D vertical & lateral motion seismograph with one vertical & two lateral motion velocity sensors to measure earthquakes of all magnitudes RS4D “strong motion seismograph with one vertical motion velocity sensor to detect earthquakes, plus one extra vertical and two lateral accelerometer sensors for powerful earthquakes RS&BOOM seismograph & infrasound monitor that […]

Advertisement