CNX Software - Embedded Systems News

November 17, 2011November 17, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Technologies and Techniques to Accelerate Embedded Development

I’ve recently attended a webinar entitled “Accelerate Your Next Embedded Development Project: Essential Tools and Techniques for Every Phase of Your Project Lifecycle” presented by Wind river and VDC Research. The two speakers were: Marc Brown, Wind River VP, Tools and Marketing Operation. Christopher Rommel, Senior Analyst at VDC Research. The webinar was composed of three sections: Industry Challenges. (Wind River) Embedded Development: Data and Trends. (VDC Research) New ways to accelerate development (Wind River) Industry challenges Marc describes the new challenges for device software drivers: Increased security, safety and quality requirements for connectivity Performance scalability: multi-cores, many cores and SoC support. Pressure to lower OPEX (Operating Expenses) Companies are now pushed to increase performance, become more cost effective and provide a better connectivity while at the same time decrease time to market, project risks and security issues. Data and Trends Christopher first present a slide showing there are still […]

November 17, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qualcomm Announced 8 New Snapdragon S4 Processors

During an investor conference, Qualcomm announced eight new Snapdragon S4 mobile processors: MSM8660A, MSM8260A, MSM8630, MSM8230, MSM8627, MSM8227, APQ8060A and APQ8030. All are using Qualcomm’s Krait CPU architecture. Here’s an excerpt of the press release: NEW YORK – November 16, 2011 – Qualcomm Incorporated announced today the expansion of its Snapdragon S4 class of next-generation mobile processors… The addition of new Snapdragon S4 processors, which are aimed at lowering design, engineering and inventory costs while bringing leading-edge 3G and 4G Internet connection speeds, will allow OEMs to introduce S4-based devices with next-generation mobile architecture throughout their respective device roadmaps-from basic smartphones to high-end smartphones and tablets. The enhanced S4 processors are also optimized for use with a suite of software solutions available from Qualcomm that help enable OEMs to deliver industry-leading feature sets for multimedia, connectivity, camera, display, security, power management, browsing and natural user interface design. The Krait CPU […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

November 17, 2011November 17, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Amazon Kindle Fire Source Code Available

After Android 4.0 source code release, it’s a good week for open source, as Amazon has also opened Kindle Fire source code as it had to comply with Android Open Source Project (AOSP) license has some point. Source code for other Kindle products is also available. The source code for the Kindle Fire is tarred in a file named Kindle_src_6.2_11185402.tar.gz which is quite a large download (809 MB). The file contains 4 directories with the source code for the Linux kernel (2.6.35), a modified version of Android 2.2, the bootloader (u-boot) and x-loader, first-level bootloader for OMAP SoC. I’m not sure many people will work on this version, as Android 4.0 source code for OMAP4 (The processor used in Kindle Fire) is available and has been ported to Galaxy Nexus and TI OMAP4 low cost development board (Pandaboard). So we could see Android 4.0 (ICS) running on Kindle Fire in […]

November 16, 2011November 16, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Beyond NFC Payment: Other NFC Use Cases

During CarteS event, NXP has uploaded a video on YouTube showing several NFC applications that are not directly used for payment. In the video below, you’ll see several such applications including: Smart Advertizement: shopping advice, movie promotion, travel info and game Smart Meter for meter reading and real-time power consumption monitoring via an Android device e-Passport with NFC Technology for faster immigration procedure. Secure Online Authentication NFC-Enable motorcycle to prevent theft NFC-enabled figurines to interact with video games. Authentication to unlock door, laptop and more. Gesture enabled smart card where you can use gesture to sign your own card and enable/disable it.

November 16, 2011June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek CAPA111: AMD G-Series Single Board Computer

Axiomtek announced the CAPA111, a single board computer powered by AMD G-Series processors T40R (single core @ 1Ghz) or T40E (dual core @ 1Ghz) with up to 4GB of DDR3 memory, LVDS & VGA video output, two gigabit Ethernet, 6 USB 2.0 ports, 2 SATA ports, 2 COM ports and more. Here are the board specifications: CPU: AMD G-Series APU single core T40R (1.0 GHz) and dual core T40E (1.0 GHz) Chipset: AMD Fusion Controller Hub A50M chipset System Memory: 1 x 204-pin DDR3-1066 SO-DIMM max. up to 4 GB SSD: 1 x CompactFlash Watchdog Timer: 255 levels, 1~255 sec. Expansion Interface: 1 x PCI Express Mini Card Battery: Lithium 3V/220mAH Size: 146 x 104mm Board thickness: 1.6 mm Temperature 0°C ~ +60°C, operation Operation Humidity: 10% ~ 95% relative humidity, non-condensing I/O: MIO: 1 x RS-232/422/485 (COM 1); with +5V/+12V powered 3 x RS-232 (COM 2/3/4) ; with +5V/+12V […]

November 16, 2011November 16, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Hardware & Systems Trends for 2012 and Beyond

VDC Research currently has a research program called “STRATEGIC INSIGHTS 2012: EMBEDDED HARDWARE & SYSTEMS” where they analyze potential opportunities and give forecasts for embedded systems market through 2016. Some recent insights from their ongoing coverage of the Embedded Hardware & Systems market include: The Communications / Networking market is engaged in a period of dynamic change that is redefining the sector’s processing requirements. FPGAs & Linux are redefining embedded market growth requirements. The smart grid is creating new opportunities for embedded processors. Single board computers are enabling next-generation computing for military / aerospace applications. The Institute for Supply Management’s PMI index continues to demonstrate isolated pockets of regional growth, suggesting that new project starts and sustained unit shipments will maintain embedded market growth in 2012. The final reports should be available in 2012 as follows: TRACK 1: FASTFORWARD: INSIGHT FOR LEADERS Volume Number Volume Title Publication Date 1 Generating […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

November 15, 2011November 15, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas Announces R-Mobile A1 Application Processors

Renesas has unveiled R-Mobile A1 series of application processor for personal navigation device (PND) and other portable devices. Here’s an excerpt of the press release: Renesas Electronics Corporation, a premier provider of advanced semiconductor solutions, and its subsidiary, Renesas Mobile Corporation, an innovative supplier of advanced cellular semiconductor solutions and platforms, today announced the R-Mobile A1 series of application processor for PND (personal navigation device) and other portable devices. The R-Mobile A1 series of devices integrate Renesas’ SH-Mobile R series and EMMA Mobile™ series, which have proven track records as application processors for PND and portable media players … Although equipment that includes ISDB-T one-segment broadcast reception functionality has become mainstream in portable equipment such as PNDs and portable media players, there are now increasing needs for higher image quality and higher functionality due to the widespread adoption of ISDB-T full-segment terrestrial digital TV broadcasting. Furthermore, there are increasing demands […]

November 15, 2011June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Android 4.0 Source Code is Now Available

Google has just released Android 4.0.1 source code in AOSP. There are 3 main branches: android-4.0.1_r1: the release branch, ITL41D, that is expected to ship on Galaxy Nexus. That’s the one you want to be using to port to devices. ics-mr0: ICS development branch. It contains a few changes that aren’t in the release branch, so it might not be as stable. That’s the one you want to use if you plan to contribute to CTS. master: usual master branch, it contains all of ics-mr0 plus a few extra changes. That’s the branch that you should use if you want to contribute to the platform. The release and development branch require the “classic” host configurations (Ubuntu 10.04, or MacOS 10.6 with XCode 3). The master branch had a few tweaks to make it work better on newer systems (Ubuntu 11.10, Mac OS 10.7 with XCode 4.2) but it’s not 100% […]

Boardcon EM3562 Rockchip RK3562 SBC with 8 analog camera inputs