CNX Software - Embedded Systems News

October 1, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arnova 7 G2 and 10 G2 Tablets Are Now Available

This week Amazon announced the Kindle Fire and got a lot of press coverage for its 199 USD Android Tablet. But the Kindle Fire was not the only low cost Tablets made available this week as Arnova G2 Tablet are also available in the US. Archos Arnova 7 G2 and 10 G2, respectively with a 7″ and 10″ capacitive display, are powered by a Rockchip RK2918 Cortex A8 processor clocked a 1Ghz, 512 MB SDRAM, 4 to 8 GB flash memory, a microSD slot and run Android 2.3 (Gingerbread) operating system. Arnova 10 G2 also have a 0.3MP front facing camera for video conference. Arnova 7 G2 can be pre-ordered on Amazon for 199.99 USD. Anrvoa 10 G2 can be purchased on Tigerdirect Ebay store for 199.99 USD. Last week, you could also get it for 99 USD with a newspaper subscription. Like the Amazon Kindle Fire, the Arnova G2 […]

October 1, 2011October 1, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Samsung Unveils New Dual-core Exynos 4212 Processor

Samsung unveiled its new Exynos processor this week at Samsung Mobile Solution Forum 2011 in Taipei, Taiwan. The Exynos 4212 is a dual core ARM Cortex A9 processor clocked up to 1.5 GHz and “will improve processing power by 25 per cent and enhance a device’s 3D abilities by a massive 50 per cent” according to Samsung. The processor will also consume 30 percent less power than its predecessor (Exynos 4210) thanks to Samsung new 32nm HKMG process. Finally the company said that the Exynos 4212 will incorporate a rich portfolio of advanced codec accelerators that support digital still images, video recording and play-back at 1080p full-HD resolution, an image signal processor and an on-chip HDMI 1.4 interface. Samsung’s Exynos 4212 processor will sample to select customers in Q4 2011. Samsung also announced a website dedicated to Exynos processors. This website has a lot of information on Exynos 3110 and […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

October 1, 2011October 1, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded MasterClass Conference Schedule in Cambridge, UK

Embeded MasterClass will take place in Cambridge on the 5th of October 2011. This conference will give you the chance to meet with embedded systems engineers from many of the world’s leading vendors and you’ll be able to attend presentations and workshops free of charge. Here’s the presentations’ schedule for the event: Time Stream 1 Stream 2 8.30 – 9.30 Tea/Coffee – Meet the Exhibitors 9.30 – 10.15 1: Leveraging the Performance of Intel® Architectures in low power, fan-less solutions with the latest Intel® Atom™ processor-based platform. Regis Cheval CEng MIET, Intel® Atom™ Platform Application Engineer – Intel 10.30 – 11.15 2: Proving your code quality. Barry Lock – Lauterbach 3: Developing reliable embedded systems using COTS and custom processors. Michael Pont, CEO – TTE Systems 11.15 – 11.45 Coffee and Exhibition 11.45 – 12.30 4: Strategic Research Agenda. Helen Finch – Artemis and Infineon 5: Safely from Conception to […]

September 30, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

NFC Forum Releases Simple NDEF Exchange Protocol (SNEP) Specification

The NFC Forum announced the release of the 16th specification of Near Field communication (NFC) dealing with the Simple NDEF Exchange Protocol (SNEP). NDEF stands for NFC Data Exchange Format. This data format has been described in an earlier specification released in 2006. SNEP is an extension of NDEF and defines protocol suitable for peer-to peer communication between two NFC-enabled devices. Previously, NDEF was applicable only to NFC tags in reader/writer mode. Now, SNEP enables the use of the openly standardized NDEF in peer-to-peer mode, making seamless interchange of data a reality. Application developers no longer need to concern themselves with how their NDEF data gets transferred between NFC-enabled devices. By providing this capability, the SNEP specification makes the difference between reader-writer and peer-to-peer operation modes disappear. SNEP Use Cases Here are two examples of potential applications for NFC technology developed with the new SNEP specification: Simplified transfer of contact […]

September 30, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

AMD G-Series Based IBase MI958 Mini-ITX Board

Taiwan-based iBase unveiled MI958 Mini-ITX boards built around AMD’s G-Series T56N, T48N and T40N processors. The board supports up to 8GB memory, offers several PCI expansion slots, 2 Ethernet Ports, 8 USB ports, 4 serial ports, 4 SATA ports and supports dual display capability via VGA, DVi-D or LVDS. The MI958 is targeted at digital signage and surveillance systems. Here are iBase MI958 specifications and features: Processor: AMD G-Series dual-core APU T56N (1.65GHz), T48N (1.4GHz) or T40N (1 GHz) Chipset: AMD A55E FCH System Memory: up to 8GB of DDR3 RAM (2x DDR3 DIMM) Expansion Slots: Mini PCI Express slot PCI Express x1 slot PCI slot Networking: 2 x PCI-E Gigabit Ethernet Other I/O: External: VGA DVI-D 2 x Serial port 4 x USB 2.0 Audio: mic in, line in, line out Internal: LVDS 4 x USB 2.0 2 x Serial port 4 x SATA Digital I/O (4 in, 4 […]

September 30, 2011September 30, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Tizen: Linux Based OS with HTML5 Application Programming Interfaces

Earlier this week, the Linux Foundation announced yet another new Linux-based open source operating system for mobile and consumer devices based on Web standards called Tizen. This project is backed by Intel and Samsung who have already been involved with Linux based operating systems before, respectively with MeeGo and Bada. Both companies will be part of the technical steering team. It looks like Tizen will replace Meego overtime. Meego developers blasted the move and posted angry comments especially in relation to Qt support and the fact that all the previous work put into the project has probably gone to waste. My take is that using HTML5 is probably not such a bad ideas as many applications are currently developed in HTML5/Javascript for Chrome Webstore for example, and it could make porting those to Tizen straightforward. Tizen will support multiple device categories including: Smartphones Tablets Smart TVs Netbooks In-vehicle infotainment devices […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

September 30, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

NVidia Tegra 3 ZTE T98 Android Tablet

We’ve already seen some Quad Core Tegra 3 demos and talks about Tegra 3 Tablets coming this year, but we had not heard about real products yet. ZTE (中兴) is expected to releast ZTE T98, possibly the first Tegra 3 Honeycomb Tablet later this year., which has been spotted in Beijing by zol.com.cn at PT/EXPO COMM CHINA 2011. Here are the ZTE T98 product features and specifications: Operating System: Android3.2 Processor: Nvidia Tegra 3 @ 1.5GHz System Memory: 1GB Flash Storage: 16GB Display: 7″ Capacitive Touche Screen with 1280×800 resolution. Network: Wifi, 3G (TD-SCDMA) Built-in Audio Chip Video output up to 1080p External Ports: 3.5mm headphone jack and power jack. Battery: Lithium Battery, 4000 mA Camera: Front camera: 2 MP, Rear camera: 5 MP. Support for JPEG，GIF and BMP pictures Sensor: gravity and accelerometer 11.5mm thick ZTE announced it would be ready in 2011, but no exact date and pricing […]

September 29, 2011October 2, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

How to Transfer files between Host and Qemu

I previously posted instructions to install and run nano and ARM Linux Internet Platform (ALIP) distribution images for Overo and Beagleboard on QEMU, If the image support networking, you could use ssh (install dropbear server in qemu) or nfs to transfer files between the host computer and qemu, or even run your program from the NFS share. This should be possible to do that on the Overo emulator since it support Ethernet. However, although I can access Internet, I cannot access the host via ssh as the host is in a private subnetwork (192.168.0.0) and qemu in another (10.0.2.0). We would probably have to enable bridge networking for that but the tun driver is apparently not compiled in ALIP kernel. I’ll look into that later on. [Update: Finally, we don’t need tun/tap to make this work, please read http://www.cnx-software.com/2011/10/02/how-to-transfer-files-between-host-and-qemu-via-ssh-and-nfs/ for details.] Today, I’ll just show how to mount a Qemu […]

Boardcon Rockchip and Allwinner SoM and SBC products