Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Raspberry Pi CM4 compatible RISC-V SoM features StarFive JH7110 SoC

Raspberry Pi CM4 compatible RISC-V SoM features StarFive JH7110 SoC

Raspberry Pi CM4 RISC-V CPU module

We’ve seen many Arm-based system-on-modules following the Raspberry Pi CM4 form factor, but we’ve now got a RISC-V one courtesy of the Milk-V Mars CM CPU module powered by a StarFive JH7110 quad-core RISC-V SoC. The RISC-V module comes with up to 8GB RAM, a 16MB SPI flash, an optional eMMC flash, onboard GbE PHY, and a wireless module with WiFi 5 and Bluetooth 5.2 plus the two 100-pin board-to-board connectors offering (partial) compatibility with carrier boards made for the Raspberry Pi Compute Module 4. Specifications: SoC – StarFive JH7110 CPU – Quad-core RISC-V processor (RV64GC) at up to 1.5GHz GPU – Imagination BXE-4-32 GPU with support for OpenCL 1.2, OpenGL ES 3.2, Vulkan 1.2 VPU H.264 & H.265 4Kp60 decoding H.265 1080p30 encoding JPEG encoder / decoder System Memory – 2GB, 4GB, or 8GB LPDDR4 Storage SDIO 2.0 (options to eMMC) 16MB NOR flash Networking Gigabit Ethernet PHY (YT8513C) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on STARLIGHT – A Raspberry Pi RP2040 board for rockets

STARLIGHT – A Raspberry Pi RP2040 board for rockets

STARLIGHT Raspberry Pi RP2040 rocket board

Circuit Wizardry’s STARLIGHT is a rocket control board based on Raspberry Pi RP2040 microcontroller and designed for small 75mm model rockets. The board features rocket control-specific I/Os such as Igniter and Ejection pins each connected to a MOSFET, two headers for 5V servos, plus some sensors and 3.3V or 5V GPIOs for expansion. STARLIGHT specifications: Microcontroller – Raspberry Pi RP2040 dual-core Arm Cortex-M0+ MCU @ 133 MHz with 264KB SRAM Storage – 16MB flash for firmware and flight data USB – 1x Micro USB port for programming Rocket control Igniter via 2-pin terminal block and AO3400 MOSFET (pulse current up to 30A) used with ignition systems to automatically light your engine. Ejection via 2-pin terminal and AO3400 MOSFET Servo control 2x 3-pin servo outputs for optional thrust loop vector control interface (X Axis and Y axis on board) Level shifter to allow the use of 5V servos with the 3.3V […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Allwinner 2023-2024 roadmap reveals A736/A737 Arm Cortex-A78/A76 processors

Allwinner 2023-2024 roadmap reveals A736/A737 Arm Cortex-A78/A76 processors

Allwinner Roadmap 2023 2024 automotive industrial SoCs

Allwinner should launch new Cortex-A76/A55 and Cortex-A78/A55 processors in 2024 according to the company’s roadmap including the Allwinner A736/A737 for tablets and the T736/T737 designed for automotive and industrial applications. In recent years, we’ve seen Rockchip and Amlogic introduce more powerful processors with the Rockchip RK3588 octa-core Cortex-A76/A55 processor and Amlogic A311D2 octa-core Cortex-A73/A53 or the more recent Amlogic S928X Cortex-A76/A55 for 8K TV boxes. But we’re still seeing some recent boards based on Allwinner Cortex-A7 32-bit processors, although recently we covered the Allwinner A523 octa-core Cortex-A55 processor for tablets. So today, I decided to go on a quest to find out whether Allwinner plans to use 64-bit Arm “big” cores in their future design. I first ended up on the linux-sunxi website where they list the Allwinner T736 octa-core “sun60i” processor with two Cortex-A76 cores and six Cortex-A55 cores, but no other details. This leads me to some “notes” […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on SparkFun launches ESP32-based “Arduino IoT Weather Station” with Arduino IoT Cloud integration

SparkFun launches ESP32-based “Arduino IoT Weather Station” with Arduino IoT Cloud integration

Sparkfun Arduino IoT Weather Station

SparkFun’s Arduino IoT Weather Station is a complete weather station kit leveraging the company’s MicroMod ecosystem with an ESP32 Processor Board and various sensors and developed in collaboration with Arduino for integration into their IoT Cloud service. Most people will check the weather on the Internet or watch the weather forecast on TV, but if you live in a remote area with a micro-climate or just want to have fun building your own weather station, the latest SparkFun kit will allow you to monitor temperature, air and soil humidity, wind speed and direction, lightning, and rainfall data at home and monitor the data from anywhere using a web browser. Arduino IoT Weather Station kit content: MicroMod ESP32 Processor module MicroMod Weather Carrier Board with a BME280 temperature, pressure, and humidity sensor and an AS3935 lightning detector only. The optional VEML6075 UV sensor is NOT included. The Weather Meter Kit with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Review of CrowView 14-inch portable monitor with laptops and mini PCs

Review of CrowView 14-inch portable monitor with laptops and mini PCs

CrowView Display Laptop Mount Ubuntu

I received an early sample of the CrowView 14-inch laptop monitor for review a few weeks ago, and regular readers may have seen me already use it in some mini PC reviews, but I’ve yet to review the monitor itself, so I’ll report my experience using both laptops and mini PCs running Windows 11 and Ubuntu 22.04. CrowView laptop monitor unboxing The display ships in a retail package highlighting the main features of the display such as its Full HD resolution, compatibility with 13 to 16.5-inch laptop displays, 160° viewing angle, and its mechanical clamping mechanism. The CrowView display ships with a 12V/2A power supply, USB-A to USB-C and USB-C to USB-C cables, an HDMI to mini HDMI cable, a velcro tie, some stickers, and a user manual in English. The clamping mechanism can be found on the back of the display. There are also four buttons on the bottom […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on ZimaBlade – A $64+ low-profile Intel Celeron board for server applications and more (Crowdfunding)

ZimaBlade – A $64+ low-profile Intel Celeron board for server applications and more (Crowdfunding)

ZimaBlade board

ZimaBlade is an inexpensive low-profile board based on an Intel Celeron dual-core or quad-core processor and designed for server applications with a low-profile RJ45 Gigabit Ethernet port, two SATA connectors, and a PCIe slot, but not only as the board also comes with display interfaces such as mini DP and USB-C DisplayPort Alt. mode and a few USB ports. It’s not IceWhale Technology’s first venture into portable server board as the company previously introduced the Zimaboard based on Intel Celeron Apollo Lake processors with many of the same features back in 2021. The new ZimaBlade offers more interfaces as well as a complete enclosure instead of just a large heatsink. ZimaBlade specifications: SoC (one or the other) ZimaBlade 3760 – Intel Celeron dual-core processor up to 2.2 GHz (Turbo) with Intel UHD graphics; 6W TDP ZimaBlade 7700 – Intel Celeron quad-core processor up to 2.4 GHz (Turbo) with Intel UHD […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Chuwi HeroBox 2023 low-cost mini PC features Processor N100, supports M.2 NVMe SSD and 2.5-inch SATA storage

Chuwi HeroBox 2023 low-cost mini PC features Processor N100, supports M.2 NVMe SSD and 2.5-inch SATA storage

CHUWI Hero 2023 N100

Chuwi HeroBox 2023 is yet another Intel Processor N100 mini PC equipped with 8GB LPDDR5 memory and a 256GB M.2 NVMe SSD, but it may offer some extra features compared to competitors with space for a 2.5-inch SATA drive, five USB ports, and HDMI and VGA video output ports for $159 plus shipping. Chuwi HeroBox 2023 N100 specifications: SoC – Intel Processor N100 Alder Lake-N quad-core/quad-thread processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 8GB LPDDR5 soldered-on board Storage 256 GB M.2 2280 PCIe SSD (replaceable) 2.5-inch SATA bay for HDD or SSD MicroSD card socket Video Output – 1x HDMI 2.0 port up to 4Kp60, VGA output Audio – 3.5mm audio jack, digital audio output via HDMI Networking Gigabit Ethernet RJ45 port Wi-Fi 6 and Bluetooth 5.2 wireless module USB – 2x USB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on ESP32-S3-BOX-3 devkit comes with 2.4-inch display, dual microphone, PCIe expansion connector

ESP32-S3-BOX-3 devkit comes with 2.4-inch display, dual microphone, PCIe expansion connector

ESP32-S3-BOX-3

Espressif Systems has launched an update to their ESP32-S3-Box development kit for online and offline voice assistants with the ESP32-S3-BOX-3 devkit that still features a 2.4-inch capacitive touchscreen display with 320×240 resolution, two microphones, a built-in speaker, and a USB-C port, but replaces the PMOD connector by a PCIe connector for various expansion modules. The open-source ESP32-S3 development kit is powered by the ESP32-S3 SoC with AI extensions and can be used to implement all sorts of solutions using the company’s ESP-SR, ESP RainMaker, and Matter solutions such as an offline voice assistant, a chatbot powered by ChatGPT, a handheld gaming console, a tiny robot, a Matter-compatible Smart Home hub, and more. ESP32-S3-BOX-3 specifications: WiSoC – ESP32-S3 dual-core Tensilica LX7 up to 240 MHz with Wi-Fi 4 & Bluetooth 5, AI instructions, 512KB SRAM Memory and Storage – 16MB octal PSRAM and 16MB QSPI flash Display – 2.4-inch capacitive touchscreen […]

Advertisement